An accurate singularity-free formulation of a three-dimensional curved Euler–Bernoulli beam with large deformations and large rotations is developed for flexible multibody dynamic analysis. Euler parameters are used to characterize orientations of cross sections of the beam, which can resolve the singularity problem caused by Euler angles. The position of the centroid line of the beam is integrated from its slope, and position vectors of nodes of beam elements are no longer used as generalized coordinates. Hence, the number of generalized coordinates for each node is minimized. Euler parameters instead of position vectors are interpolated in the current formulation, and a new C^{1}-continuous interpolation function is developed, which can greatly reduce the number of elements. Governing equations of the beam and constraint equations are derived using Lagrange's equations for systems with constraints, which are solved by the generalized- $\alpha $ method for resulting differential-algebraic equations (DAEs). The current formulation can be used to calculate static and dynamic problems of straight and curved Euler–Bernoulli beams under arbitrary, concentrated and distributed forces. The stiffness matrix and generalized force in the current formulation are much simpler than those in the geometrically exact beam formulation (GEBF) and absolute node coordinate formulation (ANCF), which makes it more suitable for static equilibrium problems. Numerical simulations show that the current formulation can achieve the same accuracy as the GEBF and ANCF with much fewer elements and generalized coordinates.

Skip Nav Destination
Comprehensive Analysis of Input Shaping Techniques for a Chain Suspended From an Overhead Crane

Article navigation

October 2016

Research-Article

# An Accurate Singularity-Free Formulation of a Three-Dimensional Curved Euler–Bernoulli Beam for Flexible Multibody Dynamic Analysis

W. Fan,

W. Fan

Division of Dynamics and Control,

School of Astronautics,

Harbin Institute of Technology,

Harbin 150001, China;

School of Astronautics,

Harbin Institute of Technology,

Harbin 150001, China;

Department of Mechanical Engineering,

University of Maryland, Baltimore County,

1000 Hilltop Circle,

Baltimore, MD 21250

University of Maryland, Baltimore County,

1000 Hilltop Circle,

Baltimore, MD 21250

Search for other works by this author on:

W. D. Zhu

W. D. Zhu

Professor

ASME Fellow

Division of Dynamics and Control,

School of Astronautics,

Harbin Institute of Technology,

Harbin 150001, China;

ASME Fellow

Division of Dynamics and Control,

School of Astronautics,

Harbin Institute of Technology,

Harbin 150001, China;

Department of Mechanical Engineering,

University of Maryland, Baltimore County,

1000 Hilltop Circle,

Baltimore, MD 21250

e-mail: wzhu@umbc.edu

University of Maryland, Baltimore County,

1000 Hilltop Circle,

Baltimore, MD 21250

e-mail: wzhu@umbc.edu

Search for other works by this author on:

W. Fan

Division of Dynamics and Control,

School of Astronautics,

Harbin Institute of Technology,

Harbin 150001, China;

School of Astronautics,

Harbin Institute of Technology,

Harbin 150001, China;

Department of Mechanical Engineering,

University of Maryland, Baltimore County,

1000 Hilltop Circle,

Baltimore, MD 21250

University of Maryland, Baltimore County,

1000 Hilltop Circle,

Baltimore, MD 21250

W. D. Zhu

Professor

ASME Fellow

Division of Dynamics and Control,

School of Astronautics,

Harbin Institute of Technology,

Harbin 150001, China;

ASME Fellow

Division of Dynamics and Control,

School of Astronautics,

Harbin Institute of Technology,

Harbin 150001, China;

Department of Mechanical Engineering,

University of Maryland, Baltimore County,

1000 Hilltop Circle,

Baltimore, MD 21250

e-mail: wzhu@umbc.edu

University of Maryland, Baltimore County,

1000 Hilltop Circle,

Baltimore, MD 21250

e-mail: wzhu@umbc.edu

1Corresponding author.

Contributed by the Technical Committee on Vibration and Sound of ASME for publication in the JOURNAL OF VIBRATION AND ACOUSTICS. Manuscript received October 7, 2015; final manuscript received March 24, 2016; published online May 25, 2016. Assoc. Editor: Mahmoud Hussein.

*J. Vib. Acoust*. Oct 2016, 138(5): 051001 (14 pages)

**Published Online:**May 25, 2016

Article history

Received:

October 7, 2015

Revised:

March 24, 2016

Citation

Fan, W., and Zhu, W. D. (May 25, 2016). "An Accurate Singularity-Free Formulation of a Three-Dimensional Curved Euler–Bernoulli Beam for Flexible Multibody Dynamic Analysis." ASME. *J. Vib. Acoust*. October 2016; 138(5): 051001. https://doi.org/10.1115/1.4033269

Download citation file:

### Get Email Alerts

J. Vib. Acoust (August 2024)

### Related Articles

An Accurate and Robust Geometrically Exact Curved Beam Formulation for Multibody Dynamic Analysis

J. Vib. Acoust (February,2018)

Kinematic, Static, and Dynamic Analysis of a Spatial Three-Degree-of-Freedom Tensegrity Mechanism

J. Mech. Des (September,2006)

A Discrete Quasi-Coordinate Formulation for the Dynamics of Elastic Bodies

J. Appl. Mech (March,2007)

Dynamic Analysis of Rotating Beams with Nonuniform Cross Sections Using the Dynamic Stiffness Method

J. Vib. Acoust (October,2001)

### Related Proceedings Papers

### Related Chapters

Introduction and Definitions

Handbook on Stiffness & Damping in Mechanical Design

Dynamic Behavior in a Singular Delayed Bioeconomic Model

International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)

Dynamic Analysis — Part 1: SDOF Systems and Basics

Pipe Stress Engineering