The behavior of a membrane mirror strip actuated using a piezoelectric bimorph is treated. An improved model for the transverse vibration is presented. The model accounts for the changes in physical properties of the membrane strip at the location of the piezoelectric bimorph. The membrane strip is modeled as a pinned-pinned beam under tension and the finite element method (FEM) is used to represent the system mathematically. The beam under tension assumption allows accounting for the traveling wave effect experienced by a membrane strip and the added flexural rigidity induced by the piezoelectric bimorph. Additionally, the structural and air damping effects are included in the model. An experimental setup is built to verify the proposed model. The frequency response obtained from the proposed model is shown to be in agreement with conducted experiments. Furthermore, the importance of including local mass and stiffness effects is demonstrated.
Skip Nav Destination
e-mail: renno@vt.edu
e-mail: dinman@vt.edu
Article navigation
October 2007
Technical Papers
An Experimentally Verified Model of a Membrane Mirror Strip Actuated Using a Piezoelectric Bimorph
Jamil M. Renno,
Jamil M. Renno
Center of Intelligent Material Systems and Structures, Department of Mechanical Engineering,
e-mail: renno@vt.edu
Virginia Polytechnic Institute and State University
, Blacksburg, VA 24061-0261
Search for other works by this author on:
Daniel J. Inman
Daniel J. Inman
Center of Intelligent Material Systems and Structures, Department of Mechanical Engineering,
e-mail: dinman@vt.edu
Virginia Polytechnic Institute and State University
, Blacksburg, VA 24061-0261
Search for other works by this author on:
Jamil M. Renno
Center of Intelligent Material Systems and Structures, Department of Mechanical Engineering,
Virginia Polytechnic Institute and State University
, Blacksburg, VA 24061-0261e-mail: renno@vt.edu
Daniel J. Inman
Center of Intelligent Material Systems and Structures, Department of Mechanical Engineering,
Virginia Polytechnic Institute and State University
, Blacksburg, VA 24061-0261e-mail: dinman@vt.edu
J. Vib. Acoust. Oct 2007, 129(5): 631-640 (10 pages)
Published Online: September 19, 2006
Article history
Received:
June 8, 2006
Revised:
September 19, 2006
Citation
Renno, J. M., and Inman, D. J. (September 19, 2006). "An Experimentally Verified Model of a Membrane Mirror Strip Actuated Using a Piezoelectric Bimorph." ASME. J. Vib. Acoust. October 2007; 129(5): 631–640. https://doi.org/10.1115/1.2756843
Download citation file:
Get Email Alerts
Cited By
Related Articles
Spectral Finite Element Analysis of Sandwich Beams With Passive Constrained Layer Damping
J. Vib. Acoust (July,2002)
Predicting Changes in Vibration Behavior With Respect to Multiple Variables Using Empirical Sensitivity Functions
J. Vib. Acoust (December,2010)
An Improved Component-Mode Synthesis Method to Predict Vibration of Rotating Spindles and Its Application to Position Errors of Hard Disk Drives
J. Vib. Acoust (October,2006)
Experimental Study of Vibration Damping in a Modified Elastic Wedge of Power-Law Profile
J. Vib. Acoust (December,2011)
Related Proceedings Papers
Related Chapters
Rub and Looseness
Fundamentals of Rotating Machinery Diagnostics
Approximate Analysis of Plates
Design of Plate and Shell Structures
Fatigue Analysis in the Connecting Rod of MF285 Tractor by Finite Element Method
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)