Skip Nav Destination
Issues
January 2018
ISSN 0889-504X
EISSN 1528-8900
In this Issue
Research Papers
Control-Oriented Methods for Turbomachinery Noise Simulation
J. Turbomach. January 2018, 140(1): 011001.
doi: https://doi.org/10.1115/1.4038022
Topics:
Acoustics
,
Boundary-value problems
,
Design
,
Ducts
,
Flow (Dynamics)
,
Noise (Sound)
,
Simulation
,
Stability
,
Transfer functions
,
Turbomachinery
Influence of Combustor Flow With Swirl on Integrated Combustor Vane Concept Full-Stage Performance
J. Turbomach. January 2018, 140(1): 011002.
doi: https://doi.org/10.1115/1.4037820
Topics:
Combustion chambers
,
Design
,
Flow (Dynamics)
,
Rotors
,
Entropy
,
Pressure
Effect of Internal Crossflow Velocity on Film Cooling Effectiveness—Part I: Axial Shaped Holes
J. Turbomach. January 2018, 140(1): 011003.
doi: https://doi.org/10.1115/1.4037997
Topics:
Film cooling
,
Coolants
,
Discharge coefficient
,
Density
,
Flow (Dynamics)
Effect of Internal Crossflow Velocity on Film Cooling Effectiveness—Part II: Compound Angle Shaped Holes
J. Turbomach. January 2018, 140(1): 011004.
doi: https://doi.org/10.1115/1.4037998
Topics:
Film cooling
,
Heat transfer coefficients
,
Discharge coefficient
,
Heat transfer
,
Coolants
Characterizing the Influence of Impeller Exit Recirculation on Centrifugal Compressor Work Input
J. Turbomach. January 2018, 140(1): 011005.
doi: https://doi.org/10.1115/1.4038120
Topics:
Compressors
,
Flow (Dynamics)
,
Impellers
,
Computational fluid dynamics
,
Modeling
Turbine Blade Platform Film Cooling With Fan-Shaped Holes Under Simulated Swirl Purge Flow and Slashface Leakage Conditions
J. Turbomach. January 2018, 140(1): 011006.
doi: https://doi.org/10.1115/1.4038150
Topics:
Coolants
,
Density
,
Film cooling
,
Flow (Dynamics)
,
Pressure
,
Blades
,
Cascades (Fluid dynamics)
,
Leakage flows
Effects of Geometry, Spacing, and Number of Pin Fins in Additively Manufactured Microchannel Pin Fin Arrays
J. Turbomach. January 2018, 140(1): 011007.
doi: https://doi.org/10.1115/1.4038179
Topics:
Fins
,
Flow (Dynamics)
,
Friction
,
Geometry
,
Heat transfer
,
Pins (Engineering)
,
Pressure
,
Microchannels
,
Reynolds number
,
Additive manufacturing
An Investigation of the Stability Enhancement of a Centrifugal Compressor Stage Using a Porous Throat Diffuser
J. Turbomach. January 2018, 140(1): 011008.
doi: https://doi.org/10.1115/1.4038181
Topics:
Compressors
,
Diffusers
,
Flow (Dynamics)
,
Pressure
,
Surges
,
Stability
,
Cavities
Effectiveness Measurements of Additively Manufactured Film Cooling Holes
J. Turbomach. January 2018, 140(1): 011009.
doi: https://doi.org/10.1115/1.4038182
Free-Form Versus Ruled Inducer Design in a Transonic Centrifugal Impeller
J. Turbomach. January 2018, 140(1): 011010.
doi: https://doi.org/10.1115/1.4038176
Topics:
Design
,
Flow (Dynamics)
,
Impellers
,
Blades
Email alerts
RSS Feeds
Influences of Particulate Deposition on Vane Trailing-Edge Film Cooling: Adiabatic and Overall Cooling Effectiveness
J. Turbomach (September 2025)
Experimental Study on Controlling Flow Separation of Compressor Cascades With Self-Excited Sweeping Jet Actuator
J. Turbomach (September 2025)
Development of Compact and Hermetic Organic Rankine Cycle Turbine Generator With Upgraded Cooling Capability
J. Turbomach (September 2025)
Unsteadiness in the Secondary Flows of a High-Speed Low-Pressure Turbine Cascade With Unsteady Wakes and Purge Flow
J. Turbomach (September 2025)
Design and Analysis of a Liftfan for eVTOL Aircraft
J. Turbomach (September 2025)