Abstract

In a high bypass ratio aircraft engine, the high-pressure and low-pressure turbines are connected by an intermediate turbine duct (ITD). The aerodynamic performance of the ITD is affected by the incoming flow from the high-pressure turbine. This paper investigates the effects of an incoming wake or/and a near casing streamwise vortex on the flow field and loss of an ITD. For the case with only an incoming wake, the wake interacts with the boundary layer (BL), forming a pair of vortices and causing additional loss. With an incoming streamwise vortex, the casing boundary layer interacts with it and a loss core forms near the casing. When both a wake and a streamwise vortex are present at the inlet, apart from interacting with the boundary layer, the wake and the streamwise vortex could interact with each other. It is found that the distance between the wake and streamwise vortex has a major effect on the flow pattern and aerodynamic loss of ITD. Three different distances between the wake and the incoming streamwise vortex are investigated. When the distance between the wake and incoming streamwise vortex is large, the two flow structures develop relatively independently and the combined effect is small. As the distance between them reduces, the flow structure induced by the wake interacts with the incoming streamwise vortex and suppresses the loss production. However, for the case with the shortest distance, the interaction enhances the loss generation. A simplified analytical model is proposed to explain this loss mechanism.

References

1.
Bansod
,
P.
, and
Bradshaw
,
P.
,
1972
, “
The Flow in S-Shaped Ducts
,”
Aeronaut. Quart.
,
23
(
2
), pp.
131
140
.
2.
Göttlich
,
E.
,
2011
, “
Research on the Aerodynamics of Intermediate Turbine Diffusers
,”
Prog. Aeosp. Sci.
,
47
(
4
), pp.
249
279
.
3.
Norris
,
G.
, and
Dominy
,
R. G.
,
1997
, “
Diffusion Rate Influences in Inter-Turbine Diffusers
,”
Proc. Inst. Mech. Eng. Part A-J: Power Energy
,
211
(
3
), pp.
235
242
.
4.
Zhang
,
Y.
,
Hu
,
S.
,
Mahallati
,
A.
,
Zhang
,
X.
, and
Vlasic
,
E.
,
2018
, “
Effects of Area Ratio and Mean Rise Angle on the Aerodynamics of Interturbine Ducts
,”
ASME J. Turbomach.
,
140
(
9
), p.
091006
.
5.
Dominy
,
R. G.
, and
Kirkham
,
D. A.
,
1996
, “
The Influence of Blade Wakes on the Performance of Interturbine Diffusers
,”
ASME J. Turbomach.
,
118
(
2
), pp.
347
352
.
6.
Hu
,
S.
,
Zhang
,
Y.
,
Zhang
,
X. F.
, and
Vlasic
,
E.
,
2011
, “Influences of Inlet Swirl Distributions on an Inter-Turbine Duct, Part I: Casing Swirl Variation,” ASME Paper No. GT2011-45554.
7.
Zhang
,
Y.
,
Hu
,
S.
,
Zhang
,
X. F.
, and
Vlasic
,
E.
,
2011
, “Influences of Inlet Swirl Distributions on an Inter-Turbine Duct, Part II: Hub Swirl Variation,” ASME Paper No. GT2011-45555.
8.
Dong
,
F.
, and
Zhou
,
C.
,
2020
, “
Streamwise Vortex Transportation and Loss Generation in an Intermediate Turbine Duct
,”
Proc. Inst. Mech. Eng. Part A-J: Power Energy
,
234
(
6
), pp.
766
776
.
9.
Göttlich
,
E.
,
Marn
,
A.
,
Pecnik
,
R.
,
Malzacher
,
F. J.
,
Schennach
,
O.
, and
Pirker
,
H. P.
,
2007
, “The Influence of Blade Tip Gap Variation on the Flow Through an Aggressive S-Shaped Intermediate Turbine Duct Downstream a Transonic Turbine Stage: Part II—Time-Resolved Results and Surface Flow,” ASME Paper No. GT2007-28069.
10.
Sanz
,
W.
,
Kelterer
,
M.
,
Pecnik
,
R.
,
Marn
,
A.
, and
Göttlich
,
E.
,
2009
, “Numerical Investigation of the Effect of Tip Leakage Flow on an Aggressive S-Shaped Intermediate Turbine Duct,” ASME Paper No. GT2009-59535.
11.
Göttlich
,
E.
,
Marn
,
A.
,
Malzacher
,
F. J.
,
Schennach
,
O.
, and
Heitmeir
,
F.
,
2007
, “
Experimental Investigation of the Flow Through an Aggressive Intermediate Turbine Duct Downstream of a Transonic Turbine Stage
,”
Proceedings of 7th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics
,
Athens, Greece
,
Mar. 5–9
, pp.
383
394
.
12.
Marn
,
A.
,
Göttlich
,
E.
,
Pecnik
,
R.
,
Malzacher
,
F. J.
,
Schennach
,
O.
, and
Pirker
,
H. P.
,
2007
, “The Influence of Blade Tip Gap Variation on the Flow Through an Aggressive S-Shaped Intermediate Turbine Duct Downstream a Transonic Turbine Stage: Part I—Time-Averaged Results,” ASME Paper No. GT2007-27405.
13.
Marn
,
A.
,
Göttlich
,
E.
,
Malzacher
,
F.
, and
Pirker
,
H. P.
,
2012
, “
The Effect of Rotor Tip Clearance Size Onto the Separated Flow Through a Super-Aggressive S-Shaped Intermediate Turbine Duct Downstream of a Transonic Turbine Stage
,”
ASME J. Turbomach.
,
134
(
5
), p.
051019
.
14.
Santner
,
C.
,
Göttlich
,
E.
,
Marn
,
A.
,
Hubinka
,
J.
, and
Paradiso
,
B.
,
2012
, “
The Application of Low-Profile Vortex Generators in an Intermediate Turbine Diffuser
,”
ASME J. Turbomach.
,
134
(
1
), p.
011023
.
15.
Sovran
,
G.
, and
Klomp
,
E. D.
,
1967
,
Fluid Mechanics of Internal Flow
,
G.
Sovran
, ed.,
Elsevier
,
Amsterdam-London-New York
, pp.
270
319
.
16.
Zhou
,
K.
, and
Zhou
,
C.
,
2018
, “
Aerodynamic Interaction Between an Incoming Vortex and Tip Leakage Flow in a Turbine Cascade
,”
ASME J. Turbomach.
,
140
(
11
), p.
111004
.
17.
Menter
,
F. R.
,
1994
, “
Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications
,”
AIAA J.
,
32
(
8
), pp.
1598
1605
.
18.
Hou
,
J.
, and
Zhou
,
C.
,
2020
, “
Loss Mechanism of Low-Pressure Turbine Secondary Flows Due to Different Incoming Boundary Layers
,”
ASME J. Eng. Gas Turbines Power
,
142
(
10
), p.
101004
.
19.
Denton
,
J. D.
,
1993
, “
Loss Mechanisms in Turbomachines
,”
ASME J. Turbomach.
,
115
(
4
), pp.
621
656
.
You do not currently have access to this content.