Future turbo systems for aircraft engines need very compact geometry, low weight, and high efficiency components. The geared turbofan enables the engine designer to decouple the speed of the fan and the LP turbine to combine a low speed fan with a high speed LP turbine. The low pressure turbine is a key component for this concept. The technological challenge is very much driven by the very high low-spool speed. Resulting as well from high inlet temperatures, the LP turbine needs cooling of the first stage. A new MTU LPT concept for such a high speed turbine has been developed and tested in a turbine rig. The concept consists of a two-stage turbine for extremely high speed and high stage pressure ratio (ER 2.3). This leads to extra high mechanical loading and an exotic combination of high Mach numbers (transonic) and very low Reynolds numbers. In this paper some design features are described. Some elements of the airfoil design were also tested in additional cascade tests. The two-stage turbine was tested at the Altitude Test Facility of the ILA, Stuttgart. The test setup is described including details of the instrumentation. Test data shows a good turbine performance. Measurements are also compared to 3D CFD, which is used to analyze local effects.
Skip Nav Destination
Article navigation
October 2006
Technical Papers
Aerodesign and Testing of an Aeromechanically Highly Loaded LP Turbine
F. J. Malzacher,
F. J. Malzacher
MTU Aero Engines
, 80995 München, Germany
Search for other works by this author on:
F. Lippl
F. Lippl
MTU Aero Engines
, 80995 München, Germany
Search for other works by this author on:
F. J. Malzacher
MTU Aero Engines
, 80995 München, Germany
J. Gier
MTU Aero Engines
, 80995 München, Germany
F. Lippl
MTU Aero Engines
, 80995 München, GermanyJ. Turbomach. Oct 2006, 128(4): 643-649 (7 pages)
Published Online: December 19, 2003
Article history
Received:
November 10, 2003
Revised:
December 19, 2003
Citation
Malzacher, F. J., Gier, J., and Lippl, F. (December 19, 2003). "Aerodesign and Testing of an Aeromechanically Highly Loaded LP Turbine." ASME. J. Turbomach. October 2006; 128(4): 643–649. https://doi.org/10.1115/1.2172646
Download citation file:
Get Email Alerts
Related Articles
A Study of Advanced High-Loaded Transonic Turbine Airfoils
J. Turbomach (October,2006)
Midspan Flow-Field Measurements for Two Transonic Linear Turbine Cascades at Off-Design Conditions
J. Turbomach (April,2002)
Inverse Design of and Experimental Measurements in a Double-Passage Transonic Turbine Cascade Model
J. Turbomach (July,2005)
Measurement and Analysis of Ingestion Through a Turbine Rim Seal
J. Turbomach (July,2003)
Related Proceedings Papers
Related Chapters
Detailed Airfoil Design for Axial-Flow Turbines
Turbine Aerodynamics: Axial-Flow and Radial-Flow Turbine Design and Analysis
Performance Testing of Combined Cycle Power Plant
Handbook for Cogeneration and Combined Cycle Power Plants, Second Edition
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential