... Contributed by the Tribology Division of ASME for publication in the J ournal of T ribology . 27 07 2024 25 12 2024 26 12 2024 20 01 2025 fretting wear LPBF Ti-6Al-4V annealing anodizing additive manufacturing artificial joints stick-slip Ti alloy is an excellent...

... with the lower connector after the sixth load cycle when the load amplitude is 160 N, while there are still constant-sticking slip areas on some thread surfaces at the end of the tenth load cycle when the load amplitude is 120 N. Table 2 Slip states of the thread surfaces in contact with the lower...

... boundary delamination stick-slip wear nano-tribology interface boundary lubrication China Scholarship Council 10.13039/501100004543 N/A Japan Society for the Promotion of Science 10.13039/501100001691 22H00261 Improving energy efficiency is a critical focus in various...

... factors affecting the wheel slips. Conditions of partial and full slips within the contact patch are determined by setting different combinations of the traction and friction coefficients. The contact behaviors including stick-slip, partial slip, full slip, surface stress, and wear are studied...

... 08 03 2022 22 03 2022 adhesion contact friction sliding stick-slip Central China Normal University 10.13039/501100005234 2021QN11082 National Natural Science Foundation of China 10.13039/501100001809 52105231 The multi-rope friction hoist uses...

... velocity, normal force, and humidity. The pattern is a square lattice of square cavities with sub-mm spacing. We find that dynamic friction decreases compared to nonpatterned surfaces, since stress concentrations lead to early detachment, and that stick-slip behavior is also affected. Friction increases...

..., focused on experimental data related to friction induced by stick-slip phenomena. The test specimen was a polytetrafluoroethylene (PTFE)-coated basalt/vinyl ester composite material, tested at a large scale. The algorithm was primarily aimed to provide scalability for processing significantly large...

... not lead to the formation of new compounds. However, it significantly improves the shore hardness and tribological properties of EPDM. In addition, significant stick-slip phenomenon occurs during the wear process of EPDM with different carbon black content. During the wear process of EPDM, there are both...

... wear. The fretting contact is categorized into partial slip, mixed stick/slip, and gross slip regimes based on the amount of stick and slip that occur in the contact [ 1 – 3 ]. In the partial slip regime, the center of the contact is in stick and the rest in slip while in gross slip regime, the entire...

... bodies was developed. Both first bodies and third bodies were modeled as elastic–plastic materials. The effect of the third body particles on contact stresses and stick-slip behavior was investigated. The influence of the number of third body particles and material properties including modulus...

... ]. The working life of the compressor blade in the aircraft engine is greatly reduced by fretting wear due to the high-frequency vibration, which is a great hidden danger [ 4 ]. fretting wear gross slip partial slip fretting regime prediction fretting wear model dry friction stick-slip...

... footprint environmental protection stick-slip plant-based lubricant effect of friction toward wear adhesion bio-lubricants boundary lubrication fluid film lubrication lubricants High pollution and carbon emissions due to the excessive use of fossil-based lubricant had been reported by many...

...@nuu.edu.tw Contributed by the Tribology Division of ASME for publication in the J ournal of T ribology . 31 12 2019 15 03 2020 15 03 2020 31 03 2020 surface acoustic wave (SAW) motor elastic friction layer Fourier transform contact friction stick-slip...

... fatigue stick-slip third bodies wear Railway transport is generally acknowledged for its low cost, energy efficiency, environmental friendliness, ride comfort, and high speeds (over short and medium distances) compared with other means of transportation. The wear between railway wheels...

... by the Tribology Division of ASME for publication in the J OURNAL OF T RIBOLOGY . Manuscript received July 15, 2017; final manuscript received February 28, 2018; published online April 5, 2018. Assoc. Editor: James R. Barber. 15 07 2017 28 02 2018 Dry friction Sliding Stick-slip Surface...

... identification method. To identify the model that best describes the stick/slip behavior of an MRE, a harmonic frictional force was exerted on its surface with magnetic fields of varying strength. The I-LuGre model showed a precise correlation with the experimental results, and the strain-stiffening model...

...; final manuscript received October 5, 2017; published online December 20, 2017. Assoc. Editor: Min Zou. 22 04 2017 05 10 2017 Friction Sliding Stick-slip Friction force occurs whenever two surfaces are in relative motion. The basic understanding of macroscopic friction...

... for publication in the J OURNAL OF T RIBOLOGY . Manuscript received November 21, 2016; final manuscript received September 2, 2017; published online October 9, 2017. Assoc. Editor: Stephen Boedo. 21 11 2016 02 09 2017 Contact Contact mechanics Dry friction Interface Stick-slip Surface...

..., 2017. Assoc. Editor: Liming Chang. 03 10 2016 13 02 2017 Contact Friction Indentation Interface Micro-tribology Sliding Stick-slip Surface roughness Asperities Interfacial damping arises from frictional shear and slip at the mating surfaces. Frictional energy...

... and plasticity index on the relationship between the tangential load and deformation is also investigated. It is shown that the present model can be used to describe the stick–slip behavior of the rough surface, and it is a more realistic-based model for the tangential rough contact. A comparison with published...