Skip Nav Destination
Issues
July 1997
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Research Papers
Prediction of Ball Fatigue Life in a Ball/V-Ring Test Rig
J. Tribol. July 1997, 119(3): 365–370.
doi: https://doi.org/10.1115/1.2833494
Topics:
Fatigue life
,
Ball bearings
,
Bearings
,
Fatigue
,
Fatigue failure
,
Aircraft
,
Lubrication
,
Stress
,
Testing
Point Contact EHL Based on Optically Measured Three-Dimensional Rough Surfaces
J. Tribol. July 1997, 119(3): 375–384.
doi: https://doi.org/10.1115/1.2833498
Topics:
Surface roughness
,
Bearings
,
Cams
,
Computer software
,
Deformation
,
Elastohydrodynamic lubrication
,
Film thickness
,
Gears
,
Machining
,
Numerical analysis
Effects of Multiple Cracking on Crack Growth and Coalescence in Contact Fatigue
J. Tribol. July 1997, 119(3): 385–390.
doi: https://doi.org/10.1115/1.2833499
Topics:
Fatigue
,
Fracture (Materials)
,
Fracture (Process)
,
Computer simulation
,
Crack propagation
,
Cycles
,
Elastic half space
,
Failure
,
Fatigue cracks
,
Gears
A Fractal Analysis of Stiction in Microelectromechanical Systems
J. Tribol. July 1997, 119(3): 391–400.
doi: https://doi.org/10.1115/1.2833500
Transient Thermoelastohydrodynamic Study of Tilting-Pad Journal Bearings—Comparison Between Experimental Data and Theoretical Results
J. Tribol. July 1997, 119(3): 401–407.
doi: https://doi.org/10.1115/1.2833501
Topics:
Journal bearings
,
Transients (Dynamics)
,
Bearings
,
Temperature
,
Clearances (Engineering)
,
Deformation
,
Errors
Analysis of a Test Case for Annular Seal Flows
J. Tribol. July 1997, 119(3): 408–414.
doi: https://doi.org/10.1115/1.2833504
Topics:
Flow (Dynamics)
,
Pressure
,
Kinetic energy
,
Navier-Stokes equations
,
Shear stress
,
Stators
,
Turbulence
,
Whirls
Experimental Study of High Speed Sealing Capability of Single Stage Ferrofluidic Seals
J. Tribol. July 1997, 119(3): 416–421.
doi: https://doi.org/10.1115/1.2833509
Topics:
Centrifugal force
,
Dimensionless numbers
,
Failure
,
Magnetic fields
,
Reynolds number
,
Sealing (Process)
Effects of Foil Bending Rigidity on Spacing Height Characteristics of Hydrostatic Porous Foil Bearings for Web Handling Processes
J. Tribol. July 1997, 119(3): 422–427.
doi: https://doi.org/10.1115/1.2833510
Topics:
Foil bearings
,
Hydrostatics
,
Stiffness
,
Bearings
,
Computation
,
Differential equations
,
Film thickness
,
Finite difference methods
,
Flow (Dynamics)
,
Pressure
CFD Based Design Techniques for Thermal Prediction in a Generic Two-Axial Groove Hydrodynamic Journal Bearing
J. Tribol. July 1997, 119(3): 428–435.
doi: https://doi.org/10.1115/1.2833511
Topics:
Computational fluid dynamics
,
Engineering design processes
,
Journal bearings
,
Bearings
,
Design
,
Shells
,
Temperature
,
Convection
,
Die cutting
,
Heat conduction
Tribochemical Study of Hydrogenated Carbon Coatings With Different Hydrogen Content Levels in Ultra High Vacuum
J. Tribol. July 1997, 119(3): 437–442.
doi: https://doi.org/10.1115/1.2833514
Topics:
Carbon
,
Coatings
,
Hydrogen
,
Vacuum
,
Disks
,
Lubricants
,
Durability
,
Friction
,
Wear
,
Air bearings
Eccentricity Effects on the Rotordynamic Coefficients of Plain Annular Seals: Theory Versus Experiment
J. Tribol. July 1997, 119(3): 443–447.
doi: https://doi.org/10.1115/1.2833515
Topics:
Bearings
,
Equilibrium (Physics)
,
Inertia (Mechanics)
,
Leakage
,
Pressure drop
,
Pumps
,
Signal to noise ratio
Surface Roughness and Structural Inertia in a Mode-Based Mass-Conserving Elastohydrodynamic Lubrication Model
J. Tribol. July 1997, 119(3): 449–455.
doi: https://doi.org/10.1115/1.2833518
A Mixed-Lubrication Study of Journal Bearing Conformal Contacts
J. Tribol. July 1997, 119(3): 456–461.
doi: https://doi.org/10.1115/1.2833519
Topics:
Journal bearings
,
Lubrication
,
Bearings
,
Film thickness
,
Lubricants
,
Pressure
,
Deformation
,
Finite element methods
,
Geometry
,
Numerical analysis
Parameter Identification of Hysteresis Friction for Coated Ball Bearings Based on Three-Dimensional FEM Analysis
J. Tribol. July 1997, 119(3): 462–470.
doi: https://doi.org/10.1115/1.2833520
Topics:
Ball bearings
,
Finite element model
,
Friction
,
Steel
,
Finite element analysis
,
Bearings
,
Coatings
,
Regression analysis
,
Stress
,
Torque
Friction and Wear Studies of Carbon Overcoated Thin Films Magnetic Sliders: Application of Raman Microspectroscopy
J. Tribol. July 1997, 119(3): 471–475.
doi: https://doi.org/10.1115/1.2833521
Topics:
Carbon
,
Friction
,
Microspectroscopy
,
Thin films
,
Wear
,
Diamond films
,
Air bearings
,
Diamonds
,
Drag (Fluid dynamics)
,
Raman spectra
Effect of Sliding Friction on Contact Stresses for Multi-Layered Elastic Bodies With Rough Surfaces
J. Tribol. July 1997, 119(3): 476–480.
doi: https://doi.org/10.1115/1.2833522
Topics:
Sliding friction
,
Stress
,
Surface roughness
,
Friction
,
Failure
,
Fatigue life
,
Lubricants
,
Particulate matter
,
Rolling contact
An FFT-Based Method for Rough Surface Contact
J. Tribol. July 1997, 119(3): 481–485.
doi: https://doi.org/10.1115/1.2833523
Theoretical and Experimental Investigation of an Externally Pressurized Porous Annular Thrust Gas Bearing and Its Optimal Design
J. Tribol. July 1997, 119(3): 486–492.
doi: https://doi.org/10.1115/1.2833524
Topics:
Design
,
Gas bearings
,
Thrust
,
Stiffness
,
Damping
,
Bearings
,
Darcy's law
,
Design methodology
,
Fluid dynamics
,
Numerical analysis
Influence of a Hard Surface Layer on the Limit of Elastic Contact—Part I: Analysis Using a Real Surface Model
J. Tribol. July 1997, 119(3): 493–500.
doi: https://doi.org/10.1115/1.2833525
Topics:
Computer simulation
,
Deformation
,
Elastic half space
,
Fast Fourier transforms
,
Geometry
,
Gradient methods
,
Pressure
,
Steel
,
Stress
,
Surface roughness
FEM Simulation of Friction Testing Method Based on Combined Forward Rod-Backward Can Extrusion
J. Tribol. July 1997, 119(3): 501–506.
doi: https://doi.org/10.1115/1.2833526
Topics:
Extruding
,
Finite element methods
,
Finite element model
,
Friction
,
Simulation
,
Testing
,
Calibration
,
Lubricants
,
Aluminum alloys
,
Containers
A Numerical Study of the Stable Dynamic Behavior of Radial Face Seals With Grooved Faces
J. Tribol. July 1997, 119(3): 507–513.
doi: https://doi.org/10.1115/1.2833527
Topics:
Cavitation
,
Design
,
Dynamic response
,
Film thickness
,
Fluctuations (Physics)
,
Hydrostatics
,
Kinematics
,
Leakage flows
,
Modeling
,
Numerical analysis
Experimental and Theoretical Analysis of Magnetic Head-Disk Interface Equilibrium in the “Rupture” Regime of the Starved-Liquid Bearing
J. Tribol. July 1997, 119(3): 515–519.
doi: https://doi.org/10.1115/1.2833530
Topics:
Bearings
,
Disks
,
Equilibrium (Physics)
,
Rupture
,
Theoretical analysis
,
Friction
,
Lubricants
,
Film thickness
,
Numerical analysis
,
Probes
An Optimum Design of the Transverse Pressure Contour Slider for Enhanced Flying Characteristics
J. Tribol. July 1997, 119(3): 520–524.
doi: https://doi.org/10.1115/1.2833531
Topics:
Design
,
Pressure
,
Design methodology
,
Rails
,
Actuators
,
Computer software
,
Optimization
,
Quadratic programming
Lubrication of Slow Rolling Contacts—The NASA Ball on Plate Tribometer
J. Tribol. July 1997, 119(3): 525–530.
doi: https://doi.org/10.1115/1.2833532
Topics:
Lubrication
,
NASA
,
Tribometers
,
Lubricants
,
Contact resistance
,
Creep
,
Fourier transform infrared spectroscopy
,
Friction
,
Instrumentation
,
Mass spectrometry
Floating Characteristics of Squeeze-Film Gas Bearings With Vibration Absorber for Linear Motion Guide
J. Tribol. July 1997, 119(3): 531–536.
doi: https://doi.org/10.1115/1.2833533
Topics:
Gas bearings
,
Vibration absorbers
,
Bearings
,
Oscillations
,
Piezoelectric actuators
,
Silicone rubber
Slider Designs for Controlling Contamination
J. Tribol. July 1997, 119(3): 537–540.
doi: https://doi.org/10.1115/1.2833534
Topics:
Contamination
,
Particulate matter
,
Air bearings
,
Simulation
The Effect of Interfacial Shear Strength on the Performance of Coated Surfaces in Repeated Sliding
J. Tribol. July 1997, 119(3): 541–548.
doi: https://doi.org/10.1115/1.2833535
Topics:
Adhesion
,
Ceramic coatings
,
Coatings
,
Cycles
,
Deformation
,
Design
,
Residual stresses
,
Shear strength
,
Space
,
Steel
Pressure and Shear Flow in a Rough Hydrodynamic Bearing, Flow Factor Calculation
J. Tribol. July 1997, 119(3): 549–555.
doi: https://doi.org/10.1115/1.2833536
Topics:
Bearings
,
Flow (Dynamics)
,
Pressure
,
Shear flow
,
Surface roughness
,
Boundary-value problems
,
Finite element methods
,
Lubrication
Rotordynamic Coefficients of Circumferentially-Grooved Liquid Seals Using the Averaged Navier-Stokes Equations
J. Tribol. July 1997, 119(3): 556–567.
doi: https://doi.org/10.1115/1.2833537
Topics:
Navier-Stokes equations
,
Turbulence
,
Boundary-value problems
,
Pressure
,
Reynolds number
,
Stress tensors
,
Viscosity
Elastohydrodynamic Lubrication Model of Connecting Rod Big-End Bearings: Application to Real Engines
J. Tribol. July 1997, 119(3): 568–578.
doi: https://doi.org/10.1115/1.2833538
Debris Denting Effects on Elastohydrodynamic Lubricated Contacts
J. Tribol. July 1997, 119(3): 579–587.
doi: https://doi.org/10.1115/1.2833539
Discussions
Discussion: “Prediction of Ball Fatigue Life in a Ball/V-Ring Test Rig” (Harris, T. A., 1997, ASME J. Tribol., 119, pp. 365–370)
J. Tribol. July 1997, 119(3): 370–372.
doi: https://doi.org/10.1115/1.2833495
Topics:
Fatigue life
Discussion: “Prediction of Ball Fatigue Life in a Ball/V-Ring Test Rig” (Harris, T. A., 1997, ASME J. Tribol., 119, pp. 365–370)
J. Tribol. July 1997, 119(3): 372–373.
doi: https://doi.org/10.1115/1.2833496
Topics:
Fatigue life
Closure to “Discussion ‘Prediction of Ball Fatigue Life in a Ball/V-Ring Test Rig’” (1997, ASME J. Tribol., 119, pp. 370–373)
J. Tribol. July 1997, 119(3): 373–374.
doi: https://doi.org/10.1115/1.2833497
Topics:
Fatigue life
Discussion: “Transient Thermoelastohydrodynamic Study of Tilting-Pad Journal Bearings—Comparison Between Experimental Data and Theoretical Results” (Monmousseau, P., Fillon, M., and Freˆne, J., 1997, ASME J. Tribol., 119, pp. 401–407)
J. Tribol. July 1997, 119(3): 407.
doi: https://doi.org/10.1115/1.2833502
Topics:
Journal bearings
,
Transients (Dynamics)
Closure to “Discussion of ‘Transient Thermoelastohydrodynamic Study of Tilting-Pad Journal Bearings—Comparison Between Experimental Data and Theoretical Results’” (1997, ASME J. Tribol., 119, p. 407)
J. Tribol. July 1997, 119(3): 407.
doi: https://doi.org/10.1115/1.2833503
Topics:
Journal bearings
,
Transients (Dynamics)
Discussion: “Analysis of a Test Case for Annular Seal Flows” (Arghir, M., and Freˆne, J., 1997, ASME J. Tribol., 119, pp. 408–414)
J. Tribol. July 1997, 119(3): 414.
doi: https://doi.org/10.1115/1.2833505
Topics:
Flow (Dynamics)
Discussion: “Analysis of a Test Case for Annular Seal Flows” (Arghir, M., and Freˆne, J., 1997, ASME J. Tribol., 119, pp. 408–414)
J. Tribol. July 1997, 119(3): 415.
doi: https://doi.org/10.1115/1.2833506
Topics:
Flow (Dynamics)
Closure to “Discussion of ‘Analysis of a Test Case for Annular Seal Flows’” (1997, ASME J. Tribol., 119, p. 414)
J. Tribol. July 1997, 119(3): 415.
doi: https://doi.org/10.1115/1.2833507
Closure to “Discussion of ‘Analysis of a Test Case for Annular Seal Flows’” (1997, ASME J. Tribol., 119, p. 415)
J. Tribol. July 1997, 119(3): 415.
doi: https://doi.org/10.1115/1.2833508
Technical Briefs
Determination of Accommodation Coefficients for N2 at Disk-Drive Air-Bearing Surfaces
J. Tribol. July 1997, 119(3): 588–589.
doi: https://doi.org/10.1115/1.2833540
Plate-Impact Technique for Measuring Dynamic Friction at High Temperatures
J. Tribol. July 1997, 119(3): 590–593.
doi: https://doi.org/10.1115/1.2833541
Topics:
High temperature
,
Sliding friction
,
Pressure
,
Shear (Mechanics)
,
Friction
,
Shear strength
Squeezing Flow of an Eyring Fluid
J. Tribol. July 1997, 119(3): 593–596.
doi: https://doi.org/10.1115/1.2833542
Topics:
Flow (Dynamics)
,
Fluids
The Interaction of Wear and Dynamics of a Simple Mechanism
J. Tribol. July 1997, 119(3): 597–599.
doi: https://doi.org/10.1115/1.2833543
Topics:
Dynamics (Mechanics)
,
Wear
Email alerts
RSS Feeds
Associate Editor's Recognition
J. Tribol (June 2025)
Synergistic Lubrication Effect of Texture and Copper on Cutting Performance for Broaching Tool
J. Tribol (September 2025)