Abstract
Micro-textured samples with different depths exhibit various contact surface morphology parameters including Sa, Sq, Ssk, and Sku, and material ratio curves. In this paper, the relationship between micro-textures and roughness parameters was investigated. The effect mechanism of micro-textures on the friction and wear through the height and functional roughness parameters was elucidated. Micro-textured samples presented more negative Ssk, higher Sku, and larger Svk with the increasing dimple depth. The pin-on-disc reciprocating tribological test results indicated that the more negative Ssk, higher Sku, and larger Svk presented lower friction coefficient under the constant Sa and Sq. The wear topographies for the flat and micro-textured specimens with various dimple depths were examined by laser scanning confocal microscope. X-ray photoelectron spectroscopy was employed to describe the formation of absorbed film and tribofilm on the worn surface of flat and micro-textured samples. It was confirmed that more negative Ssk, higher Sku, and material ratio curves with their relative parameters (smaller value of Spk, Sk, Smr1, and larger value of Svk) could be used for predicting the tribological performance of micro-textured samples.
References
1.
Andersson
, P.
, Koskinen
, J.
, Varjus
, S.
, Gerbig
, Y.
, Haefke
, H.
, Georgiou
, S.
, Zhmud
, B.
, and Buss
, W.
, 2007
, “Microlubrication Effect by Laser-Textured Steel Surfaces
,” Wear
, 262
(3–4
), pp. 369
–379
. 10.1016/j.wear.2006.06.0032.
Sagbas
, B.
, and Durakbasa
, M. N.
, 2013
, “Effect of Surface Patterning on Frictional Heating of Vitamin E Blended UHMWPE
,” Wear
, 303
(1–2
), pp. 313
–320
. 10.1016/j.wear.2013.03.0233.
Sun
, Q.
, Hu
, T.
, Fan
, H.
, Zhang
, Y.
, and Hu
, L.
, 2015
, “Dry Sliding Wear Behavior of TC11 Alloy at 500° C: Influence of Laser Surface Texturing
,” Tribol. Int.
, 92
, pp. 136
–145
. 10.1016/j.triboint.2015.06.0034.
Amanov
, A.
, and Sasaki
, S.
, 2013
, “A Study on the Tribological Characteristics of Duplex-Treated Ti-6Al-4V Alloy Under Oil-Lubricated Sliding Conditions
,” Tribol. Int.
, 64
, pp. 155
–163
. 10.1016/j.triboint.2013.03.0155.
Borghi
, A.
, Gualtieri
, E.
, Marchetto
, D.
, Moretti
, L.
, and Valeri
, S.
, 2008
, “Tribological Effects of Surface Texturing on Nitriding Steel for High-Performance Engine Applications
,” Wear
, 265
(7–8
), pp. 1046
–1051
. 10.1016/j.wear.2008.02.0116.
Gao
, L.
, Yang
, P.
, Dymond
, I.
, Fisher
, J.
, and Jin
, Z.
, 2010
, “Effect of Surface Texturing on the Elastohydrodynamic Lubrication Analysis of Metal-on-Metal Hip Implants
,” Tribol. Int.
, 43
(10
), pp. 1851
–1860
. 10.1016/j.triboint.2010.02.0067.
Zhao
, W.
, Wang
, C.
, Zhang
, T.
, Yang
, M.
, Han
, B.
, and Neville
, A.
, 2016
, “Effects of Laser Surface Melting on Erosion-Corrosion of X65 Steel in Liquid-Solid Jet Impingement Conditions
,” Wear
, 362
, pp. 39
–52
. 10.1016/j.wear.2016.05.0068.
Gu
, C.
, Meng
, X.
, Xie
, Y.
, and Zhang
, D.
, 2017
, “The Influence of Surface Texturing on the Transition of the Lubrication Regimes Between a Piston Ring and a Cylinder Liner
,” Int. J. Engine. Res.
, 18
(8
), pp. 785
–796
. 10.1177/14680874166732829.
Kovalchenko
, A.
, Ajayi
, O.
, Erdemir
, A.
, and Fenske
, G.
, 2011
, “Friction and Wear Behavior of Laser Textured Surface Under Lubricated Initial Point Contact
,” Wear
, 271
(9–10
), pp. 1719
–1725
. 10.1016/j.wear.2010.12.04910.
Schneider
, J.
, Braun
, D.
, and Greiner
, C.
, 2017
, “Laser Textured Surfaces for Mixed Lubrication: Influence of Aspect Ratio, Textured Area and Dimple Arrangement
,” Lubricants
, 5
(3
), p. 32
. 10.3390/lubricants503003211.
Lee
, Y. H.
, Schuh
, J. K.
, Ewoldt
, R. H.
, and Allison
, J. T.
, 2017
, “Enhancing Full-Film Lubrication Performance via Arbitrary Surface Texture Design
,” ASME J. Mech. Des.
, 139
(5
), p. 053401
. 10.1115/1.403613312.
Usman
, A.
, and Park
, C. W.
, 2017
, “Numerical Investigation of Tribological Performance in Mixed Lubrication of Textured Piston Ring-Liner Conjunction With a Non-Circular Cylinder Bore
,” Tribol. Int.
, 105
, pp. 148
–157
. 10.1016/j.triboint.2016.09.04313.
Tang
, W.
, Zhou
, Y.
, Zhu
, H.
, and Yang
, H.
, 2013
, “The Effect of Surface Texturing on Reducing the Friction and Wear of Steel Under Lubricated Sliding Contact
,” Appl. Surf. Sci.
, 273
, pp. 199
–204
. 10.1016/j.apsusc.2013.02.01314.
Saeidi
, F.
, Meylan
, B.
, Hoffmann
, P.
, and Wasmer
, K.
, 2016
, “Effect of Surface Texturing on Cast Iron Reciprocating Against Steel Under Starved Lubrication Conditions: A Parametric Study
,” Wear
, 348
, pp. 17
–26
. 10.1016/j.wear.2015.10.02015.
Braun
, D.
, Greiner
, C.
, Schneider
, J.
, and Gumbsch
, P.
, 2014
, “Efficiency of Laser Surface Texturing in the Reduction of Friction Under Mixed Lubrication
,” Tribol. Int.
, 77
, pp. 142
–147
. 10.1016/j.triboint.2014.04.01216.
Tomanik
, E.
, 2013
, “Modelling the Hydrodynamic Support of Cylinder Bore and Piston Rings With Laser Textured Surfaces
,” Tribol. Int.
, 59
, pp. 90
–96
. 10.1016/j.triboint.2012.01.01617.
Menezes
, P. L.
, and Kailas
, S. V.
, 2008
, “Effect of Surface Roughness Parameters and Surface Texture on Friction and Transfer Layer Formation in Tin-Steel Tribo-System
,” J. Mater. Process. Tech.
, 208
(1–3
), pp. 372
–382
. 10.1016/j.jmatprotec.2008.01.00318.
Menezes
, P. L.
, and Kailas
, S. V.
, 2009
, “Influence of Surface Texture and Roughness Parameters on Friction and Transfer Layer Formation During Sliding of Aluminium Pin on Steel Plate
,” Wear
, 267
(9–10
), pp. 1534
–1549
. 10.1016/j.wear.2009.06.00319.
Menezes
, P. L.
, Kailas
, S. V.
, and Lovell
, M. R.
, 2011
, “Friction and Transfer Layer Formation in Polymer-Steel Tribo-System: Role of Surface Texture and Roughness Parameters
,” Wear
, 271
(9–10
), pp. 2213
–2221
. 10.1016/j.wear.2010.12.04720.
Sedlaček
, M.
, Podgornik
, B.
, and Vižintin
, J.
, 2009
, “Influence of Surface Preparation on Roughness Parameters, Friction and Wear
,” Wear
, 266
(3–4
), pp. 482
–487
. 10.1016/j.wear.2008.04.01721.
Sedlaček
, M.
, Podgornik
, B.
, and Vižintin
, J.
, 2012
, “Correlation Between Standard Roughness Parameters Skewness and Kurtosis and Tribological Behaviour of Contact Surfaces
,” Tribol. Int.
, 48
, pp. 102
–112
. 10.1016/j.triboint.2011.11.00822.
Sedlaček
, M.
, Gregorčič
, P.
, and Podgornik
, B.
, 2017
, “Use of the Roughness Parameters Ssk and Sku to Control Friction–A Method for Designing Surface Texturing
,” Tribol. T.
, 60
(2
), pp. 260
–266
. 10.1080/10402004.2016.115935823.
Svahn
, F.
, Kassman-Rudolphi
, Å
, and Wallén
, E.
, 2003
, “The Influence of Surface Roughness on Friction and Wear of Machine Element Coatings
,” Wear
, 254
(11
), pp. 1092
–1098
. 10.1016/S0043-1648(03)00341-724.
Chen
, L.
, Liu
, Z.
, Li
, Y.
, and Shi
, Z.
, 2018
, “Effects of Micro-Milled Malposed Dimple Structures on Tribological Behavior of Al-Si Alloy Under Droplet Lubricant Condition
,” Int. J. Adv. Manuf. Technol.
, 98
(1–4
), pp. 143
–150
. 10.1007/s00170-017-0603-825.
Zhu
, S.
, and Huang
, P.
, 2017
, “Influence Mechanism of Morphological Parameters on Tribological Behaviors Based on Bearing Ratio Curve
,” Tribol. Int.
, 109
, pp. 10
–18
. 10.1016/j.triboint.2016.12.01426.
Heuberger
, R.
, Rossi
, A.
, and Spencer
, N. D.
, 2007
, “XPS Study of the Influence of Temperature on ZnDTP Tribofilm Composition
,” Tribol. Lett.
, 25
(3
), pp. 185
–196
. 10.1007/s11249-006-9166-927.
Xu
, Y.
, Zheng
, Q.
, Abuflaha
, R.
, Olson
, D.
, Furlong
, O.
, You
, T.
, Zhang
, Q.
, Hu
, X.
, and Tysoe
, W. T.
, 2019
, “Influence of Dimple Shape on Tribofilm Formation and Tribological Properties of Textured Surfaces Under Full and Starved Lubrication
,” Tribol. Int.
, 136
, pp. 267
–275
. 10.1016/j.triboint.2019.03.04728.
Xu
, Y.
, Peng
, Y.
, Dearn
, K. D.
, You
, T.
, Geng
, J.
, and Hu
, X.
, 2017
, “Fabrication and Tribological Characterization of Laser Textured Boron Cast Iron Surfaces
,” Surf. Coat. Technol.
, 313
, pp. 391
–401
. 10.1016/j.surfcoat.2017.02.00529.
Zhou
, J. G.
, Thompson
, J.
, Cutler
, J.
, Blyth
, R.
, Kasrai
, M.
, Bancroft
, G. M.
, and Yamaguchi
, E.
, 2010
, “Resolving the Chemical Variation of Phosphates in Thin ZDDP Tribofilms by X-Ray Photoelectron Spectroscopy Using Synchrotron Radiation: Evidence for Ultraphosphates and Organic Phosphates
,” Tribol. Lett.
, 39
(1
), pp. 101
–107
. 10.1007/s11249-010-9619-z30.
Lee
, J.
, Lee
, H.
, and Lim
, B.
, 2018
, “Chemical Transformation of Iron Alkoxide Nanosheets to FeOOH Nanoparticles for Highly Active and Stable Oxygen Evolution Electrocatalysts
,” J. Ind. Eng. Chem.
, 58
, pp. 100
–104
. 10.1016/j.jiec.2017.09.01331.
Huang
, W.
, Ranke
, W.
, and Schlögl
, R.
, 2007
, “Reduction of an α-Fe2O3 (0001) Film Using Atomic Hydrogen
,” J. Phys. Chem. C
, 111
(5
), pp. 2198
–1204
. 10.1021/jp066584u32.
Xu
, Y.
, Yu
, J.
, Geng
, J.
, Abuflaha
, R.
, Olson
, D.
, Hu
, X.
, and Tysoe
, W. T.
, 2018
, “Characterization of the Tribological Behavior of the Textured Steel Surfaces Fabricated by Photolithographic Etching
,” Tribol. Lett.
, 66
(2
), pp. 1
–15
. 10.1007/s11249-018-1003-433.
Neville
, A.
, Morina
, A.
, Haque
, T.
, and Voong
, M.
, 2007
, “Compatibility Between Tribological Surfaces and Lubricant Additives–How Friction and Wear Reduction Can be Controlled by Surface/Lube Synergies
,” Tribol. Int.
, 40
(10–12
), pp. 1680
–1695
. 10.1016/j.triboint.2007.01.019Copyright © 2019 by ASME
You do not currently have access to this content.
