... suppressed. And with the increase of working inclination, the vapor diffuses more easily because of the gravity-assist and the temperature fluctuation no longer occurs. Under horizontal working conditions, the temperature distribution of the vapor chamber shows the characteristics of high in the middle...

... Corresponding author. Email: pghosefme@kiit.ac.in 06 12 2022 28 03 2023 05 04 2023 18 05 2023 rotary air preheater porous media effectiveness CFD temperature distribution heat and mass transfer The increasing energy demand has made researchers investigate different...

... are obtained. The numerical simulation is carried out to investigate the temperature distribution of materials and gases in the furnace tube. It is revealed in the results that the temperature distribution of the electric rotary alumina kiln is more uniform than that of the internal rotary kiln, and the stable...

..., and the influence of outside air temperature and train velocity on the thermal environment inside the tunnel are simulated and analyzed. The piston action can significantly change the temperature inside the tunnel, especially at the ends of tunnel. The temperature distribution is characterized by three zones...

... for publication in the J ournal of T hermal S cience and E ngineering A pplications . 10 03 2019 15 05 2019 16 05 2019 20 05 2019 2D2S thermal model Li-ion battery pack thermal management wind tunnel test temperature distribution Lithium-ion (Li-ion) batteries have...

... treelike branched network was used to describe the complicated geometrical frame of blood vessels. The temperature distribution and ice crystal growth process in biological tissue including normal tissue and tumor embedded with two cryoprobes were numerically simulated. The effects of cooling rate, initial...

.... The other technique enables sensor-based measurements of the wall shear stress magnitude and direction. Both techniques are based on the close link between momentum and heat transport in the boundary layer and correlate the surface temperature distribution of a heated surface (first technique) or a heated...

...P. Regulagadda; G. F. Naterer; I. Dincer This paper analyzes the thermal performance of a co-current flow heat exchanger with transient gas outflow. The temperature distributions of the working fluid, heating fluid, and the wall over the length of the heat exchanger are predicted by an integral...

.... The performance of a CT is well indicated by the temperature distribution inside it. In this study, numerical analysis was performed to predict the temperature distribution inside the CT at every instant under different load conditions. It was found that the numerical results obtained were in good agreement...

... effect on the simulated temperature distribution. As the calcining kiln rotates, the tertiary air injection nozzles will move relative to the coke bed and exert cyclic air-bed interactions. At zero angular position, the air injection nozzles are diametrically located away from the bed so the interactions...

... agreements between measured and calculated refractory temperature profiles have been achieved. It has been used to analyze the velocity and temperature distributions and wear patterns of different furnaces and operating conditions. The results can be used to predict the inner profile of hearth and to provide...

... temperature distributions. The model imposes a radiation boundary condition at the outlet tip of the ports, which acts as a heat source. The model was validated using field data and showed that both the airflow distribution in the ports and tube diameter can be used to control the maximum tube wall...