... generation, which is basically affected due to different discharge rates. To reduce this, phase change materials (PCMs) are employed around the batteries as they possess high heat latent capacity, compactness, and lightweight nature without the necessity of additional power. In the present study, the heat...

...S. M. D. Shehabaz; S. K. Gugulothu; Raju Muthyala; Praveen Barmavatu Poor thermal conductivity is common in batteries that use phase change material (PCM)-based thermal management systems (BTMS). This study introduces cylindrical rings and longitudinal fins to improve heat transfer. The thermal...

... of a novel phase change material (PCM)-based heat sink coupled with a heat pipe under different orientations. The experiments are conducted at a constant fill ratio of 99% on several heat sink configurations, such as a heat sink (i) with the stem at the center, (ii) with four fins, and (iii) with three...

...Mohammad Reza Mohaghegh; Syeda Humaira Tasnim; Shohel Mahmud Utilizing phase change material (PCM) in concentric tube and shell-and-tube latent heat exchangers known as latent heat thermal energy storage (LHTES) have been extensively studied due to the high ability and density in storing energy...

...Ayman Benkaddour; Mustapha Faraji Sensible thermal energy storage (TES) systems can reduce energy environmental fluctuation dependency with the nocturnal energy needs usage in maintaining the building's comfort levels. In the present paper, phase change material (PCM) is introduced to improve...

...Thota Markandeyulu; Jaya Krishna Devanuri; K. Kiran Kumar Computational fluid dynamic analysis of a phase change material (PCM) based heat sink has been carried out in the present study. The PCM used is RT44HC. Longitudinal fins made of aluminum have been considered. The influence of pertinent...

... characteristics of the phase change material (PCM) are affected by supergravity significantly (around 30%) within 20 g. With the increase of supergravity, the heating wall temperature decreases, and the liquid fraction as well as the melting rate increases. Meanwhile, the variation amplitudes of these melting...

...Khaoula Nedjem; Mohamed Teggar; Kamal Adbel Radi Ismail; Driss Nehari Phase change materials (PCMs) generally suffer from low thermal conductivity which limits their application in thermal systems. The effective thermal conductivity may be improved by including fins, metallic powders, fine wires...