Volume 144 Issue 5 | J. Pressure Vessel Technol.

Skip Nav Destination

Research Papers

Design and Analysis

The Analysis of Mechanical Properties and Lightweight Design of Nonmetallic Armored Umbilical Cable

Yu Deng, Xu Liang, Zeng Cao, Lingpeng Kong, Chizhong Wang, Yongdu Ruan, Xinlong Zheng

J. Pressure Vessel Technol. October 2022, 144(5): 051301. doi: https://doi.org/10.1115/1.4053163

Abstract

View articletitled, The Analysis of Mechanical Properties and Lightweight Design of Nonmetallic Armored Umbilical Cable

Open the PDF for in another window

Topics: Cables , Friction , Mechanical properties , Stiffness , Design , Water

Fracture Assessment for Pressurized Water Reactor Vessel Nozzles Subjected to Pressure and Thermal Loading

Chu Qibao, Wang Qing, Fang Yonggang, Tan Wei

J. Pressure Vessel Technol. October 2022, 144(5): 051302. doi: https://doi.org/10.1115/1.4053225

Abstract

View articletitled, Fracture Assessment for Pressurized Water Reactor Vessel Nozzles Subjected to Pressure and Thermal Loading

Open the PDF for in another window

Topics: Fracture (Materials) , Nozzles , Pressure , Stress , Transients (Dynamics) , Fatigue cracks

Modeling and Simulation of the Engraving Process in Different Life Stages of Small Caliber Guns

Mohamed Dhouibi, Hamza Ousji, Oussama Atoui, Rachid Nassri, Marc Pirlot

J. Pressure Vessel Technol. October 2022, 144(5): 051303. doi: https://doi.org/10.1115/1.4053479

Abstract

View articletitled, Modeling and Simulation of the Engraving Process in Different Life Stages of Small Caliber Guns

Open the PDF for in another window

Topics: Pressure , Projectiles , Computer simulation , Guns

Development of a Simplified Pressurized Water Reactor Fuel Assembly Nonlinear Model

Namgyu Park, Youngik Yoo, Taesoon Kim, Sangyoun Jeon

J. Pressure Vessel Technol. October 2022, 144(5): 051304. doi: https://doi.org/10.1115/1.4053481

Abstract

View articletitled, Development of a Simplified Pressurized Water Reactor Fuel Assembly Nonlinear Model

Open the PDF for in another window

Topics: Fuels , Manufacturing , Stiffness , Finite element model , Fuel rods , Damping

Allowable Cracks Related to Penetration for Part-Through Cracks in Pipes Subjected to Bending Stresses

Kunio Hasegawa, Yinsheng Li, Bohumír Strnadel, Anees Udyawar

J. Pressure Vessel Technol. October 2022, 144(5): 051305. doi: https://doi.org/10.1115/1.4053482

Abstract

View articletitled, Allowable Cracks Related to Penetration for Part-Through Cracks in Pipes Subjected to Bending Stresses

Open the PDF for in another window

Topics: Fracture (Materials) , Pipes , Stress , Collapse

Bounded Elastic Moduli Multiplier Technique for Limit Loads: Part 1—Theory

Sathya Prasad Mangalaramanan

J. Pressure Vessel Technol. October 2022, 144(5): 051306. doi: https://doi.org/10.1115/1.4053531

Abstract

View articletitled, Bounded Elastic Moduli Multiplier Technique for Limit Loads: Part 1—Theory

Open the PDF for in another window

Topics: Stress , Elastic moduli

Bounded Elastic Moduli Multiplier Technique for Limit Loads: Part 2—Case Studies

Sathya Prasad Mangalaramanan

J. Pressure Vessel Technol. October 2022, 144(5): 051307. doi: https://doi.org/10.1115/1.4053382

Abstract

View articletitled, Bounded Elastic Moduli Multiplier Technique for Limit Loads: Part 2—Case Studies

Open the PDF for in another window

Topics: Stress , Elastic moduli

On the Modeling of Gas and Liquid Leaks Through Packed Glands

Ali Salah Omar Aweimer, Abdel-Hakim Bouzid

J. Pressure Vessel Technol. October 2022, 144(5): 051308. doi: https://doi.org/10.1115/1.4053830

Abstract

View articletitled, On the Modeling of Gas and Liquid Leaks Through Packed Glands

Open the PDF for in another window

Topics: Flow (Dynamics) , Leakage , Packing (Shipments) , Packings (Cushioning) , Stress , Helium , Pressure

Damage Model Prediction of Crack Initiation and Propagation in Five Fracture Geometries for X80 Pipeline Steel

Bruce W. Williams, Jia Xue, Su Xu, Dong-Yeob Park, William R. Tyson

J. Pressure Vessel Technol. October 2022, 144(5): 051309. doi: https://doi.org/10.1115/1.4053737

Abstract

View articletitled, Damage Model Prediction of Crack Initiation and Propagation in Five Fracture Geometries for X80 Pipeline Steel

Open the PDF for in another window

Topics: Damage , Finite element analysis , Fracture (Materials) , Pipes , Stress , Tension , Simulation , Pressure , Steel , Pipelines

Buckling Behavior of Thick Porous Functionally Graded Material Toroidal Shell Segments Under External Pressure and Elevated Temperature Including Tangential Edge Restraint

Vu Thanh Long, Hoang Van Tung

J. Pressure Vessel Technol. October 2022, 144(5): 051310. doi: https://doi.org/10.1115/1.4053485

Abstract

View articletitled, Buckling Behavior of Thick Porous Functionally Graded Material Toroidal Shell Segments Under External Pressure and Elevated Temperature Including Tangential Edge Restraint

Open the PDF for in another window

Topics: Buckling , External pressure , Functionally graded materials , Porosity , Shells , Stress , Temperature , Deflection

Fluid-Structure Interaction

The Flow-Structure Couplings of Fluidelastic Instability and the Effect of Frequency Detuning in Triangular Tube Bundles Subjected to a Two-Phase Flow

Omar Sadek, Atef Mohany, Marwan Hassan

J. Pressure Vessel Technol. October 2022, 144(5): 051401. doi: https://doi.org/10.1115/1.4053381

Abstract

View articletitled, The Flow-Structure Couplings of Fluidelastic Instability and the Effect of Frequency Detuning in Triangular Tube Bundles Subjected to a Two-Phase Flow

Open the PDF for in another window

Topics: Couplings , Damping , Flow (Dynamics) , Stiffness , Stability , Two-phase flow

Materials and Fabrication

Local Approach of Ductile Rupture Under Cyclic Loading Conditions

Al Mahdi Remmal, Stéphane Marie

J. Pressure Vessel Technol. October 2022, 144(5): 051501. doi: https://doi.org/10.1115/1.4053162

Abstract

View articletitled, Local Approach of Ductile Rupture Under Cyclic Loading Conditions

Open the PDF for in another window

Topics: Elasticity , Hardening , Pipes , Porosity , Rupture , Simulation , Engineering simulation , Kinematics , Fracture (Materials)

Effect of Shot Peening on the Surface Oxidation of P92 Steel in the Steam Environment at 600 °C

Yuhui Huang, Fu-Zhen Xuan

J. Pressure Vessel Technol. October 2022, 144(5): 051502. doi: https://doi.org/10.1115/1.4053379

Abstract

View articletitled, Effect of Shot Peening on the Surface Oxidation of P92 Steel in the Steam Environment at 600 °C

Open the PDF for in another window

Topics: Oxidation , Shot peening , Steel , Stress , Steam

Numerical Simulation and Experimental Study on Hydraulic Bursting Failure of Aluminum Alloy T-Shaped Tube in Hydroforming

Yubin Fan, Xuefeng Xu, Yiwang Wu, Liming Wei, Lin Huang, Yao Xiao

J. Pressure Vessel Technol. October 2022, 144(5): 051503. doi: https://doi.org/10.1115/1.4053655

Abstract

View articletitled, Numerical Simulation and Experimental Study on Hydraulic Bursting Failure of Aluminum Alloy T-Shaped Tube in Hydroforming

Open the PDF for in another window

Topics: Aluminum alloys , Computer simulation , Failure , Pressure , Stress , Fracture (Materials) , Simulation results , Finite element model , Stress analysis (Engineering)

Magnetic Method for Rapid Detection of Carburization Degree of Fe–Cr–Ni Series High-Temperature Heat-Resistant Alloy

Tao Chen, Xuedong Chen, Junhai Chen, Jihong Zhang, Chunjiao Liu

J. Pressure Vessel Technol. October 2022, 144(5): 051504. doi: https://doi.org/10.1115/1.4053335

Abstract

View articletitled, Magnetic Method for Rapid Detection of Carburization Degree of Fe–Cr–Ni Series High-Temperature Heat-Resistant Alloy

Open the PDF for in another window

Topics: Alloys , Carburization , Heat , High temperature , Sensors , Furnaces , Cracking (Materials) , Fracture (Process)

Mechanical Degradation Behavior of Single Crystal LiNi_xMn_yCo_zO₂ Cathode in Li-Ion Battery by Indentation Analysis

Ying Chen, Weiling Luan, Xuanchen Zhu, Haofeng Chen

J. Pressure Vessel Technol. October 2022, 144(5): 051505. doi: https://doi.org/10.1115/1.4053530

Abstract

View articletitled, Mechanical Degradation Behavior of Single Crystal LiNixMnyCozO2 Cathode in Li-Ion Battery by Indentation Analysis

Open the PDF for in another window

Topics: Crystals , Cycles , Elastic moduli , Electrodes , Lithium-ion batteries , Mechanical properties , Nanoindentation , Particulate matter , Stress , Active materials

Failure Criteria for Brittle Notched Specimens

Y. W. Kwon, C. Diaz-Colon, S. Defisher

J. Pressure Vessel Technol. October 2022, 144(5): 051506. doi: https://doi.org/10.1115/1.4053484

Abstract

View articletitled, Failure Criteria for Brittle Notched Specimens

Open the PDF for in another window

Topics: Brittleness , Failure , Stress , Composite materials , Fracture (Materials) , Shapes

Study of Residual Stress Evolution in SUS304/Q235 Bimetallic Clad Plate Butt-Welded Joints Considering Welding Sequence

Min Zhu, Yansong Zhang, Qiao Zheng, Wei Wu, Weifang Qian, Baosen Wang

J. Pressure Vessel Technol. October 2022, 144(5): 051507. doi: https://doi.org/10.1115/1.4053879

Abstract

View articletitled, Study of Residual Stress Evolution in SUS304/Q235 Bimetallic Clad Plate Butt-Welded Joints Considering Welding Sequence

Open the PDF for in another window

Topics: Stress , Welding , Stress concentration

Weldability and the Effect on Heat-Affected Zone Microstructure of a High Hardenability Boron Steel Compared to SAE 1045 After Shielded Metal Arc Welding

José Gustavo de Oliveira, Antonio do Nascimento Silva Alves, Jaime Casanova, Jeferson Jose de Carvalho, Sérgio Duarte Brandi

J. Pressure Vessel Technol. October 2022, 144(5): 051508. doi: https://doi.org/10.1115/1.4053878

Abstract

View articletitled, Weldability and the Effect on Heat-Affected Zone Microstructure of a High Hardenability Boron Steel Compared to SAE 1045 After Shielded Metal Arc Welding

Open the PDF for in another window

Topics: Boron , Heat , Metals , Steel , Welding , Arc welding , Microhardness , Base metals

Analysis of Stresses and Strains in Stainless Steel 316 L Tubes Subjected to Die Expansion

Zijian Zhao, Abdel-Hakim Bouzid, Nor-Eddine Laghzale

J. Pressure Vessel Technol. October 2022, 144(5): 051509. doi: https://doi.org/10.1115/1.4053877

Abstract

View articletitled, Analysis of Stresses and Strains in Stainless Steel 316 L Tubes Subjected to Die Expansion

Open the PDF for in another window

Topics: Stress , Stainless steel , Kinematics , Residual stresses , Hardening

Operations, Applications, and Components

Research on Prediction Models for the Compression-Resilience Performance of Corrugated Metal Gaskets With Residual Stress

Yuanye Zhan, Meng Lan, Xiaolei Zhu, Xiaofeng Lu

J. Pressure Vessel Technol. October 2022, 144(5): 051701. doi: https://doi.org/10.1115/1.4053602

Abstract

View articletitled, Research on Prediction Models for the Compression-Resilience Performance of Corrugated Metal Gaskets With Residual Stress

Open the PDF for in another window

Topics: Compression , Gaskets , Metals , Resilience , Stress , Simulation , Finite element methods , Manufacturing

Pipeline Systems

A New Risk Assessment Model to Check Safety Threats to Long-Distance Pipelines

Duhui Lu, Guangpei Cong, Bing Li

J. Pressure Vessel Technol. October 2022, 144(5): 051801. doi: https://doi.org/10.1115/1.4053224

Abstract

View articletitled, A New Risk Assessment Model to Check Safety Threats to Long-Distance Pipelines

Open the PDF for in another window

Topics: Corrosion , Inspection , Pipelines , Risk assessment , Risk

Assessing the Secondary Stress in a Pipe System With Circumferential Surface Crack Using Finite Element Modeling

Mohammed Uddin, Sureshkumar Kalyanam, Gery Wilkowski, Frederick Brust, John Martin

J. Pressure Vessel Technol. October 2022, 144(5): 051802. doi: https://doi.org/10.1115/1.4053883

Abstract

View articletitled, Assessing the Secondary Stress in a Pipe System With Circumferential Surface Crack Using Finite Element Modeling

Open the PDF for in another window

Topics: Pipes , Fracture (Materials) , Stress

Numerical Study of Horizontally Bent Buried Steel Pipelines Subjected to Oblique Faulting

Gautam S. Nair, Suresh R. Dash, Goutam Mondal

J. Pressure Vessel Technol. October 2022, 144(5): 051803. doi: https://doi.org/10.1115/1.4054686

Abstract

View articletitled, Numerical Study of Horizontally Bent Buried Steel Pipelines Subjected to Oblique Faulting

Open the PDF for in another window

Topics: Pipelines , Pipes , Soil , Stress , Design , Pressure

Design Innovation Paper

Finite Element Analysis of the Load Factor and New Design Method for Bolted Joints Consisting of Dissimilar Hollow Cylinders Under Tensile Loads

Shunichiro Sawa, Yasuhisa Sekiguchi

J. Pressure Vessel Technol. October 2022, 144(5): 055001. doi: https://doi.org/10.1115/1.4053856

Abstract

View articletitled, Finite Element Analysis of the Load Factor and New Design Method for Bolted Joints Consisting of Dissimilar Hollow Cylinders Under Tensile Loads

Open the PDF for in another window

Topics: Bolted joints , Cylinders , Stress , Finite element methods

Research Papers

Design and Analysis

The Analysis of Mechanical Properties and Lightweight Design of Nonmetallic Armored Umbilical Cable

Fracture Assessment for Pressurized Water Reactor Vessel Nozzles Subjected to Pressure and Thermal Loading

Modeling and Simulation of the Engraving Process in Different Life Stages of Small Caliber Guns

Development of a Simplified Pressurized Water Reactor Fuel Assembly Nonlinear Model

Allowable Cracks Related to Penetration for Part-Through Cracks in Pipes Subjected to Bending Stresses

Bounded Elastic Moduli Multiplier Technique for Limit Loads: Part 1—Theory

Bounded Elastic Moduli Multiplier Technique for Limit Loads: Part 2—Case Studies

On the Modeling of Gas and Liquid Leaks Through Packed Glands

Damage Model Prediction of Crack Initiation and Propagation in Five Fracture Geometries for X80 Pipeline Steel

Buckling Behavior of Thick Porous Functionally Graded Material Toroidal Shell Segments Under External Pressure and Elevated Temperature Including Tangential Edge Restraint

Fluid-Structure Interaction

The Flow-Structure Couplings of Fluidelastic Instability and the Effect of Frequency Detuning in Triangular Tube Bundles Subjected to a Two-Phase Flow

Materials and Fabrication

Local Approach of Ductile Rupture Under Cyclic Loading Conditions

Effect of Shot Peening on the Surface Oxidation of P92 Steel in the Steam Environment at 600 °C

Numerical Simulation and Experimental Study on Hydraulic Bursting Failure of Aluminum Alloy T-Shaped Tube in Hydroforming

Magnetic Method for Rapid Detection of Carburization Degree of Fe–Cr–Ni Series High-Temperature Heat-Resistant Alloy

Mechanical Degradation Behavior of Single Crystal LiNi_xMn_yCo_zO₂ Cathode in Li-Ion Battery by Indentation Analysis

Failure Criteria for Brittle Notched Specimens

Study of Residual Stress Evolution in SUS304/Q235 Bimetallic Clad Plate Butt-Welded Joints Considering Welding Sequence

Weldability and the Effect on Heat-Affected Zone Microstructure of a High Hardenability Boron Steel Compared to SAE 1045 After Shielded Metal Arc Welding

Analysis of Stresses and Strains in Stainless Steel 316 L Tubes Subjected to Die Expansion

Operations, Applications, and Components

Research on Prediction Models for the Compression-Resilience Performance of Corrugated Metal Gaskets With Residual Stress

Pipeline Systems

A New Risk Assessment Model to Check Safety Threats to Long-Distance Pipelines

Assessing the Secondary Stress in a Pipe System With Circumferential Surface Crack Using Finite Element Modeling

Numerical Study of Horizontally Bent Buried Steel Pipelines Subjected to Oblique Faulting

Design Innovation Paper

Finite Element Analysis of the Load Factor and New Design Method for Bolted Joints Consisting of Dissimilar Hollow Cylinders Under Tensile Loads

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Design and Analysis

Fluid-Structure Interaction

Materials and Fabrication

Operations, Applications, and Components

Pipeline Systems

Design Innovation Paper

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only