Skip Nav Destination
Issues
June 2014
ISSN 0094-9930
EISSN 1528-8978
Research Papers
Design and Analysis
Plastic Limit Loads for Slanted Through-Wall Cracks in Cylinder and Plate Based on Finite Element Limit Analyses
J. Pressure Vessel Technol. June 2014, 136(3): 031201.
doi: https://doi.org/10.1115/1.4026109
Topics:
Cylinders
,
Stress
,
Finite element analysis
,
Fracture (Materials)
,
Pressure
,
Tension
Effect of Load Angle on Limit Load of Polyethylene Miter Pipe Bends
J. Pressure Vessel Technol. June 2014, 136(3): 031202.
doi: https://doi.org/10.1115/1.4026069
Topics:
Pipe bends
,
Stress
,
Collapse
,
Deflection
Fracture Mode Transition for Explosively Loaded GB/JB 20 Steel Containment Vessels
J. Pressure Vessel Technol. June 2014, 136(3): 031203.
doi: https://doi.org/10.1115/1.4026578
Topics:
Failure
,
Fracture (Materials)
,
Fracture (Process)
,
Crack propagation
Experimental Investigation of Net-Section-Collapse Criterion for Circumferentially Cracked Cylinders Subjected to Torsional Moment
J. Pressure Vessel Technol. June 2014, 136(3): 031204.
doi: https://doi.org/10.1115/1.4026277
Topics:
Collapse
,
Cylinders
,
Fracture (Materials)
,
Fracture (Process)
,
Pipes
,
Stress
Investigation of Bulging Behavior of Coke Drum: Feasible Study on Causes of Bulging
Mitsuru Ohata, Nana Kawai, Tetsuya Tagawa, Fumiyoshi Minami, Toshiya Yamamoto, Kazuaki Arii, Shinta Niimoto
J. Pressure Vessel Technol. June 2014, 136(3): 031205.
doi: https://doi.org/10.1115/1.4026046
Topics:
Coke
,
Cycles
,
Quenching (Metalworking)
,
Shells
,
Welded joints
,
Cooling
,
Temperature
Ballooning Deformation of Zircaloy-4 Fuel Sheath
J. Pressure Vessel Technol. June 2014, 136(3): 031206.
doi: https://doi.org/10.1115/1.4026146
Topics:
Creep
,
Deformation
,
Fuels
,
Heating
,
Pressure
,
Stress
,
Temperature
,
Displacement
Fluid-Structure Interaction
Statististical Performance Evaluation of Soft Seat Pressure Relief Valves
J. Pressure Vessel Technol. June 2014, 136(3): 031301.
doi: https://doi.org/10.1115/1.4026362
Topics:
Failure
,
Probability
,
Valves
,
Fluids
,
Steam
,
Relief valves
,
Performance evaluation
Dynamic Force on an Elbow Caused by a Traveling Liquid Slug
J. Pressure Vessel Technol. June 2014, 136(3): 031302.
doi: https://doi.org/10.1115/1.4026276
Topics:
Pressure
,
Slug flows
,
Pipes
Numerical Analysis of Fretting-Wear With a Hybrid Elastoplastic Friction Model
J. Pressure Vessel Technol. June 2014, 136(3): 031303.
doi: https://doi.org/10.1115/1.4025446
Materials and Fabrication
Inherent-Strain-Based Theory of Measurement of Three-Dimensional Residual Stress Distribution and Its Application to a Welded Joint in a Reactor Vessel
J. Pressure Vessel Technol. June 2014, 136(3): 031401.
doi: https://doi.org/10.1115/1.4026496
Topics:
Errors
,
Reactor vessels
,
Stress
,
Stress concentration
,
Welded joints
,
Residual stresses
Coalesced Martensite in Pressure Vessel Steels
J. Pressure Vessel Technol. June 2014, 136(3): 031402.
doi: https://doi.org/10.1115/1.4026192
Topics:
Fracture toughness
,
Steel
,
Pressure vessels
,
Grain size
,
Plates (structures)
,
Cooling
The Consequences of Macroscopic Segregation on the Transformation Behavior of a Pressure-Vessel Steel
J. Pressure Vessel Technol. June 2014, 136(3): 031403.
doi: https://doi.org/10.1115/1.4026448
Topics:
Ferrites (Magnetic materials)
,
Pressure vessels
,
Steel
,
Temperature
,
Cooling
Development of Creep-Fatigue Evaluation Method for Modified 9Cr-1Mo Steel
J. Pressure Vessel Technol. June 2014, 136(3): 031404.
doi: https://doi.org/10.1115/1.4026497
Topics:
Creep
,
Fatigue
,
Relaxation (Physics)
,
Stress
,
Steel
,
Failure
,
Ductility
,
Evaluation methods
Fatigue Life of the Strain Hardened Austenitic Stainless Steel in Simulated Pressurized Water Reactor Primary Water
J. Pressure Vessel Technol. June 2014, 136(3): 031405.
doi: https://doi.org/10.1115/1.4026521
Topics:
Cycles
,
Fatigue life
,
Pressurized water reactors
,
Water
,
Stainless steel
,
Fatigue
,
Temperature
,
Stress
Operations, Applications & Components
ASME Section III Treatment of Stress Distribution in Cylindrical Vessels With Symmetric Thin-Walled Discontinuity
J. Pressure Vessel Technol. June 2014, 136(3): 031601.
doi: https://doi.org/10.1115/1.4024863
Seismic Engineering
Finite Element Analysis of Buried Polyethylene Pipe Subjected to Seismic Landslide
J. Pressure Vessel Technol. June 2014, 136(3): 031801.
doi: https://doi.org/10.1115/1.4026148
Topics:
Deflection
,
Deformation
,
Displacement
,
Failure
,
Finite element analysis
,
Landslides
,
Pipes
,
Polyethylene pipes
,
Soil
,
Stress
Technical Brief
Long-Term, High-Throughput Operation of a Controlled Detonation Chamber Based on Shakedown Under Initial Overload in the Plastic Range
J. Pressure Vessel Technol. June 2014, 136(3): 034501.
doi: https://doi.org/10.1115/1.4026361
Topics:
Design
,
Explosions
,
Vessels
,
Pressure
,
Testing
,
Stress
,
Deformation
A Nonlinear Finite Element Study on Settlement and Releveling Procedure of a Large Deformed Steel Tank
J. Pressure Vessel Technol. June 2014, 136(3): 034502.
doi: https://doi.org/10.1115/1.4026191
Topics:
American Petroleum Institute
,
Deformation
,
Finite element analysis
,
Roofs
,
Shells
,
Stress
,
Shapes
,
Displacement
,
Finite element model
,
Buckling
Email alerts
RSS Feeds
Formulation of the Stress Corrosion Crack Growth Rates Based on the Theoretical Strain Rate Model for Light Water Reactors
J. Pressure Vessel Technol (October 2025)
Failure Analysis of the Threaded Connection of the Top Inlet Pipe for the High-Pressure Polyethylene Reactor
J. Pressure Vessel Technol (October 2025)
Application of Fracture Assessment Method Considering Constraint Effect to Ductile-Brittle Transition Temperature Region
J. Pressure Vessel Technol (October 2025)
Fatigue Limit Analysis of Notched Components by a Local Approach+
J. Pressure Vessel Technol (October 2025)
