Volume 133 Issue 5 | J. Pressure Vessel Technol.

Skip Nav Destination

Research Papers

Design and Analysis

An Improved Anisotropic Tertiary Creep Damage Formulation

Calvin M. Stewart, Ali P. Gordon, Young Wha Ma, Richard W. Neu

J. Pressure Vessel Technol. October 2011, 133(5): 051201. doi: https://doi.org/10.1115/1.4002497

Abstract

View articletitled, An Improved Anisotropic Tertiary Creep Damage Formulation

Open the PDF for in another window

Topics: Anisotropy , Creep , Damage , Stress , Tensors , Superalloys

Use of Functionally Graded Material Layers in a Two-Layered Pressure Vessel

E. Carrera, M. Soave

J. Pressure Vessel Technol. October 2011, 133(5): 051202. doi: https://doi.org/10.1115/1.4003458

Abstract

View articletitled, Use of Functionally Graded Material Layers in a Two-Layered Pressure Vessel

Open the PDF for in another window

Topics: Functionally graded materials , Pipes , Pressure , Pressure vessels , Shells , Stress , Carbon fibers , Buckling

Elevated Temperature Shakedown Concepts

Charles Becht, IV

J. Pressure Vessel Technol. October 2011, 133(5): 051203. doi: https://doi.org/10.1115/1.4003456

Abstract

View articletitled, Elevated Temperature Shakedown Concepts

Open the PDF for in another window

Topics: Creep , Cycles , Stress , Temperature , Relaxation (Physics) , Fatigue

An Exact Solution for Classic Coupled Thermoelasticity in Cylindrical Coordinates

M. Jabbari, H. Dehbani, M. R. Eslami

J. Pressure Vessel Technol. October 2011, 133(5): 051204. doi: https://doi.org/10.1115/1.4003459

Abstract

View articletitled, An Exact Solution for Classic Coupled Thermoelasticity in Cylindrical Coordinates

Open the PDF for in another window

Topics: Boundary-value problems , Cylinders , Thermoelasticity

Strength Behavior of Hot-Tapped Pipeline Under Internal Pressure Load

B. H. Wu, Z. F. Sang, Z. L. Wang, G. E. O. Widera

J. Pressure Vessel Technol. October 2011, 133(5): 051205. doi: https://doi.org/10.1115/1.4003460

Abstract

View articletitled, Strength Behavior of Hot-Tapped Pipeline Under Internal Pressure Load

Open the PDF for in another window

Topics: Finite element analysis , Pipelines , Pressure , Stress

Optimum Design of Inhomogeneous Rotating Disks for Minimum Creep Induced Radial Displacement

Behrooz Farshi, Jalal Bidabadi

J. Pressure Vessel Technol. October 2011, 133(5): 051206. doi: https://doi.org/10.1115/1.4003463

Abstract

View articletitled, Optimum Design of Inhomogeneous Rotating Disks for Minimum Creep Induced Radial Displacement

Open the PDF for in another window

Topics: Creep , Disks , Optimization , Rotating disks , Stress , Design , Displacement , Deformation , Blades

Research on the Calculation Method of Tightening Torque on P-110S Threaded Connections

Shou-Jun Chen, Qi An, Yi Zhang, Qiang Li

J. Pressure Vessel Technol. October 2011, 133(5): 051207. doi: https://doi.org/10.1115/1.4003464

Abstract

View articletitled, Research on the Calculation Method of Tightening Torque on P-110S Threaded Connections

Open the PDF for in another window

Topics: Friction , Thread , Torque , Finite element analysis , Computational methods

An Evaluation of Creep-Fatigue Damage for the Prototype Process Heat Exchanger of the NHDD Plant

Hyeong-Yeon Lee, Kee-Nam Song, Yong-Wan Kim, Sung-Deok Hong, Hong-Yune Park

J. Pressure Vessel Technol. October 2011, 133(5): 051208. doi: https://doi.org/10.1115/1.4003466

Abstract

View articletitled, An Evaluation of Creep-Fatigue Damage for the Prototype Process Heat Exchanger of the NHDD Plant

Open the PDF for in another window

Topics: Alloys , Creep , Damage , Fatigue , Heat exchangers , High temperature , Design , Engineering prototypes , Finite element analysis , Temperature

Analysis of the Dynamic Response of a Controlled Detonation Chamber

B. Simoens, M. H. Lefebvre, R. E. Nickell, F. Minami, J. K. Asahina

J. Pressure Vessel Technol. October 2011, 133(5): 051209. doi: https://doi.org/10.1115/1.4003469

Abstract

View articletitled, Analysis of the Dynamic Response of a Controlled Detonation Chamber

Open the PDF for in another window

Topics: Cycles , Deformation , Explosions , Explosives , Impulse (Physics) , Shapes , Vessels , Computer simulation , Dynamic response , Emulsions

Plastic Instabilities in Spherical Vessels for Static and Dynamic Loading

T. A. Duffey

J. Pressure Vessel Technol. October 2011, 133(5): 051210. doi: https://doi.org/10.1115/1.4003472

Abstract

View articletitled, Plastic Instabilities in Spherical Vessels for Static and Dynamic Loading

Open the PDF for in another window

Topics: Pressure , Spherical shells , Stress , Vessels , Displacement , Shells , Dynamic testing (Materials) , Hardening , Failure

Residual Stresses in Roller Expanded Tube-Tubesheet Joints With Large Initial Clearance and Grooves

A. N. Shuaib, O. M. Duffuaa, N. Merah, Y. Al-Nassar

J. Pressure Vessel Technol. October 2011, 133(5): 051211. doi: https://doi.org/10.1115/1.4003465

Abstract

View articletitled, Residual Stresses in Roller Expanded Tube-Tubesheet Joints With Large Initial Clearance and Grooves

Open the PDF for in another window

Topics: Clearances (Engineering) , Hoop stress , Residual stresses , Rollers , Stress , Finite element model , Deformation , Heat exchangers , Stress corrosion cracking

Shakedown Limit Load Determination for a Kinematically Hardening 90 deg Pipe Bend Subjected to Steady Internal Pressures and Cyclic Bending Moments

Hany F. Abdalla, Maher Y. A. Younan, Mohammad M. Megahed

J. Pressure Vessel Technol. October 2011, 133(5): 051212. doi: https://doi.org/10.1115/1.4003474

Abstract

View articletitled, Shakedown Limit Load Determination for a Kinematically Hardening 90 deg Pipe Bend Subjected to Steady Internal Pressures and Cyclic Bending Moments

Open the PDF for in another window

Topics: Pipe bends , Pressure , Stress , Hardening , Finite element analysis

Fluid-Structure Interaction

Experimental Validation of Inverse Techniques for the Remote Identification of Impact Forces in Gap-Supported Systems Subjected to Local and Flow Turbulence Excitations

Xavier Delaune, Philippe Piteau, Vincent Debut, Jose Antunes

J. Pressure Vessel Technol. October 2011, 133(5): 051301. doi: https://doi.org/10.1115/1.4002926

Abstract

View articletitled, Experimental Validation of Inverse Techniques for the Remote Identification of Impact Forces in Gap-Supported Systems Subjected to Local and Flow Turbulence Excitations

Open the PDF for in another window

Topics: Excitation , Flow (Dynamics) , Turbulence , Inverse problems

Elliptical Deformation of a Floating Roof Pontoon Due to Radial Second Mode of Sloshing (Effect of the Geometry of Pontoon Cross-Section on the Hoop Membrane Stress)

M. Utsumi, K. Ishida

J. Pressure Vessel Technol. October 2011, 133(5): 051302. doi: https://doi.org/10.1115/1.4003462

Abstract

View articletitled, Elliptical Deformation of a Floating Roof Pontoon Due to Radial Second Mode of Sloshing (Effect of the Geometry of Pontoon Cross-Section on the Hoop Membrane Stress)

Open the PDF for in another window

Topics: Deformation , Membranes , Roofs , Sloshing , Stress , Geometry , Displacement

Materials and Fabrication

Creep Behavior of Pressurized Tank Composed of Functionally Graded Materials

JianJun Chen, KeeBong Yoon, Shan-Tung Tu

J. Pressure Vessel Technol. October 2011, 133(5): 051401. doi: https://doi.org/10.1115/1.4003455

Abstract

View articletitled, Creep Behavior of Pressurized Tank Composed of Functionally Graded Materials

Open the PDF for in another window

Topics: Creep , Functionally graded materials , Stress , Hoop stress

Liquid Leak Predictions in Micro- and Nanoporous Gaskets

Lotfi Grine, Abdel-Hakim Bouzid

J. Pressure Vessel Technol. October 2011, 133(5): 051402. doi: https://doi.org/10.1115/1.4003467

Abstract

View articletitled, Liquid Leak Predictions in Micro- and Nanoporous Gaskets

Open the PDF for in another window

Topics: Flow (Dynamics) , Gaskets , Leakage , Porosity , Pressure , Stress , Porous materials

Formation Mechanism of the Eigen-line in Electrofusion Joints of Polyethylene Pipes

Jianfeng Shi, Jinyang Zheng, Weican Guo

J. Pressure Vessel Technol. October 2011, 133(5): 051403. doi: https://doi.org/10.1115/1.4003471

Abstract

View articletitled, Formation Mechanism of the Eigen-line in Electrofusion Joints of Polyethylene Pipes

Open the PDF for in another window

Topics: Temperature , Welding , Crystals , Acoustics , Pipes , Heating

Pipeline Systems

Effect of Lüders Plateau on Fracture Response and Toughness of Pipelines Subject to Extreme Plastic Bending

Nikzad Nourpanah, Farid Taheri

J. Pressure Vessel Technol. October 2011, 133(5): 051701. doi: https://doi.org/10.1115/1.4002930

Abstract

View articletitled, Effect of Lüders Plateau on Fracture Response and Toughness of Pipelines Subject to Extreme Plastic Bending

Open the PDF for in another window

Topics: Fracture (Materials) , Fracture toughness , Pipelines , Work hardening , Stress , Pipes , Finite element analysis

Technical Briefs

Stress Intensity Factor Equations for Internal Semi-Elliptical Cracks in Pressurized Cylinders

J. M. Alegre, I. I. Cuesta

J. Pressure Vessel Technol. October 2011, 133(5): 054501. doi: https://doi.org/10.1115/1.4002613

Abstract

View articletitled, Stress Intensity Factor Equations for Internal Semi-Elliptical Cracks in Pressurized Cylinders

Open the PDF for in another window

Topics: Cylinders , Fatigue life , Fracture (Materials) , Stress , Fracture mechanics

Pressure Testing Feedwater Heaters and Power Plant Auxiliary Heat Exchangers

Stanley Yokell

J. Pressure Vessel Technol. October 2011, 133(5): 054502. doi: https://doi.org/10.1115/1.4003468

Abstract

View articletitled, Pressure Testing Feedwater Heaters and Power Plant Auxiliary Heat Exchangers

Open the PDF for in another window

Topics: ASME Standards , Feedwater , Heat exchangers , Hydrostatic testing , Leakage , Power stations , Pressure , Testing , Shells , Inspection

Errata

Erratum: “Application of Negligible Creep Criteria to Candidate Materials for HTGR Pressure Vessel” (Journal of Pressure Vessel Technology, 2011, 133, p. 021103)

R. I. Jetter, T.-L. Sham, R. W. Swindeman

J. Pressure Vessel Technol. October 2011, 133(5): 057001. doi: https://doi.org/10.1115/1.4004509

Extract

View articletitled, Erratum: “Application of Negligible Creep Criteria to Candidate Materials for HTGR Pressure Vessel” (<span class="related-article">Journal of Pressure Vessel Technology, 2011, 133, p. 021103</span>)

Open the PDF for in another window

Topics: Creep , Pressure vessels , Very high temperature reactors , Nuclear power stations

Research Papers

Design and Analysis

An Improved Anisotropic Tertiary Creep Damage Formulation

Use of Functionally Graded Material Layers in a Two-Layered Pressure Vessel

Elevated Temperature Shakedown Concepts

An Exact Solution for Classic Coupled Thermoelasticity in Cylindrical Coordinates

Strength Behavior of Hot-Tapped Pipeline Under Internal Pressure Load

Optimum Design of Inhomogeneous Rotating Disks for Minimum Creep Induced Radial Displacement

Research on the Calculation Method of Tightening Torque on P-110S Threaded Connections

An Evaluation of Creep-Fatigue Damage for the Prototype Process Heat Exchanger of the NHDD Plant

Analysis of the Dynamic Response of a Controlled Detonation Chamber

Plastic Instabilities in Spherical Vessels for Static and Dynamic Loading

Residual Stresses in Roller Expanded Tube-Tubesheet Joints With Large Initial Clearance and Grooves

Shakedown Limit Load Determination for a Kinematically Hardening 90 deg Pipe Bend Subjected to Steady Internal Pressures and Cyclic Bending Moments

Fluid-Structure Interaction

Experimental Validation of Inverse Techniques for the Remote Identification of Impact Forces in Gap-Supported Systems Subjected to Local and Flow Turbulence Excitations

Elliptical Deformation of a Floating Roof Pontoon Due to Radial Second Mode of Sloshing (Effect of the Geometry of Pontoon Cross-Section on the Hoop Membrane Stress)

Materials and Fabrication

Creep Behavior of Pressurized Tank Composed of Functionally Graded Materials

Liquid Leak Predictions in Micro- and Nanoporous Gaskets

Formation Mechanism of the Eigen-line in Electrofusion Joints of Polyethylene Pipes

Pipeline Systems

Effect of Lüders Plateau on Fracture Response and Toughness of Pipelines Subject to Extreme Plastic Bending

Technical Briefs

Stress Intensity Factor Equations for Internal Semi-Elliptical Cracks in Pressurized Cylinders

Pressure Testing Feedwater Heaters and Power Plant Auxiliary Heat Exchangers

Errata

Erratum: “Application of Negligible Creep Criteria to Candidate Materials for HTGR Pressure Vessel” (Journal of Pressure Vessel Technology, 2011, 133, p. 021103)

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Design and Analysis

Fluid-Structure Interaction

Materials and Fabrication

Pipeline Systems

Technical Briefs

Errata

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only