Skip Nav Destination
Issues
June 2011
ISSN 0094-9930
EISSN 1528-8978
Research Papers
Codes and Standards
Assessment of Piping Field Failures and Burst Tests on Carbon Steel Pipes With Local Wall Thinning Using ASME Section XI Code Case N-597-2
J. Pressure Vessel Technol. June 2011, 133(3): 031101.
doi: https://doi.org/10.1115/1.4002498
Topics:
Pipes
,
Wall thickness
,
Carbon steel
Design and Analysis
Analytical Solution of the Thermoelasticity Problem in a Coke Drum With Cladding
J. Pressure Vessel Technol. June 2011, 133(3): 031201.
doi: https://doi.org/10.1115/1.4002625
Burst Pressure Determination of Vehicle Toroidal Oval Cross-Section LPG Fuel Tanks
J. Pressure Vessel Technol. June 2011, 133(3): 031202.
doi: https://doi.org/10.1115/1.4002863
Topics:
Finite element analysis
,
Fuel storage
,
Pressure
,
Shells
,
Vehicles
,
Failure
,
Failure analysis
Thermal Hot Spot and Corrosion Damage in Conical Pressure Components
J. Pressure Vessel Technol. June 2011, 133(3): 031203.
doi: https://doi.org/10.1115/1.4001923
The Limit Load Interactions of the Brazed Aluminum Plate-Fin Heat Exchanger Header Under Combined Piping Loads
J. Pressure Vessel Technol. June 2011, 133(3): 031204.
doi: https://doi.org/10.1115/1.4002050
Topics:
Pipes
,
Stress
,
Aluminum
,
Heat exchangers
Modeling Hydraulically Expanded Tube-to-Tubesheet Joint Based on General Stress-Strain Curves of Tube and Tubesheet Materials
J. Pressure Vessel Technol. June 2011, 133(3): 031205.
doi: https://doi.org/10.1115/1.4002259
Shakedown Analysis of a Composite Cylinder With a Cross-Hole
J. Pressure Vessel Technol. June 2011, 133(3): 031206.
doi: https://doi.org/10.1115/1.4002264
Topics:
Composite materials
,
Cylinders
,
Stress
,
Plasticity
,
Yield stress
,
Temperature
Shakedown Limit Loads for 90 Degree Scheduled Pipe Bends Subjected to Steady Internal Pressure and Cyclic Bending Moments
J. Pressure Vessel Technol. June 2011, 133(3): 031207.
doi: https://doi.org/10.1115/1.4002055
Topics:
Pipe bends
,
Pressure
,
Stress
,
Finite element analysis
Assessment of Overlapped Internal and External Volumetric Flaws in Diagram
J. Pressure Vessel Technol. June 2011, 133(3): 031208.
doi: https://doi.org/10.1115/1.4002053
Topics:
Collapse
,
Cylinders
,
Finite element analysis
,
Pressure
,
Stress
Fluid-Structure Interaction
Study of Fluid Effects on Dynamics of Composite Structures
J. Pressure Vessel Technol. June 2011, 133(3): 031301.
doi: https://doi.org/10.1115/1.4002377
Topics:
Composite materials
,
Fluid structure interaction
,
Water
,
Fluids
CFD Tool for Assessment of the Reactor Pressure Vessel Integrity in Pressure Thermal Shock Conditions: Influence of Turbulence Model and Mesh Refinement on the Vessel Thermal Loading During PTS Transient
J. Pressure Vessel Technol. June 2011, 133(3): 031302.
doi: https://doi.org/10.1115/1.3027494
Topics:
Boundary-value problems
,
Computational fluid dynamics
,
Fluids
,
Geometry
,
Nozzles
,
Safety
,
Temperature
,
Thermal shock
,
Transients (Dynamics)
,
Turbulence
Materials and Fabrication
Prediction of Ductile-to-Brittle Transition Under Different Strain Rates in Undermatched Welded Joints
J. Pressure Vessel Technol. June 2011, 133(3): 031401.
doi: https://doi.org/10.1115/1.4002670
Analytical Study of the Relaxation of Welding Residual Stress by Excessive Loading for Austenitic Stainless Steel Piping Welds
J. Pressure Vessel Technol. June 2011, 133(3): 031402.
doi: https://doi.org/10.1115/1.4002260
Topics:
Pipes
,
Relaxation (Physics)
,
Stress
,
Welded joints
,
Welding
Crack Initiation Process for Semicircular Notched Plate in Fatigue Test at Elevated Temperature
J. Pressure Vessel Technol. June 2011, 133(3): 031403.
doi: https://doi.org/10.1115/1.4002539
Topics:
Cycles
,
Fatigue testing
,
Fracture (Materials)
,
Stress
,
Temperature
Pipeline Systems
The Effect of Prestrain on Ductile Fracture Toughness of Reeled Pipeline Steels
J. Pressure Vessel Technol. June 2011, 133(3): 031701.
doi: https://doi.org/10.1115/1.4002280
Topics:
Cycles
,
Fracture (Materials)
,
Fracture toughness
,
Pipelines
,
Pipes
,
Steel
,
Welding
,
Ductile fracture
Optimal Design of Onshore Natural Gas Pipelines
J. Pressure Vessel Technol. June 2011, 133(3): 031702.
doi: https://doi.org/10.1115/1.4002496
Topics:
Corrosion
,
Design
,
Failure
,
Life cycle costing
,
Maintenance
,
Pipelines
,
Risk
,
Wall thickness
,
Pipes
,
Probability
Technology Reviews
Plant Life Management Models: A Comparison With Analysis of Impact on Both Safety and Nonsafety Issues
J. Pressure Vessel Technol. June 2011, 133(3): 034001.
doi: https://doi.org/10.1115/1.4002553
Topics:
Maintenance
,
Nuclear power stations
,
Safety
,
Decision making
Technical Briefs
Study on Hardness and Elastic Modulus of Surface Nanostructured 304 Stainless Steel Using Two Mechanical Methods
J. Pressure Vessel Technol. June 2011, 133(3): 034501.
doi: https://doi.org/10.1115/1.4002554
Topics:
Elastic moduli
,
Microhardness
,
Nanoindentation
,
Stainless steel
,
Testing
,
Corrosion resistance
Email alerts
RSS Feeds
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)