Skip Nav Destination
Issues
February 2011
ISSN 0094-9930
EISSN 1528-8978
Editorial
European Research and Analysis of Buckling
J. Pressure Vessel Technol. February 2011, 133(1): 010201.
doi: https://doi.org/10.1115/1.4002979
Topics:
Buckling
,
Pipes
,
Pressure vessels
,
Shells
Research Papers
Design and Analysis
Buckling of Thin-Walled Long Steel Cylinders Subjected to Bending
J. Pressure Vessel Technol. February 2011, 133(1): 011201.
doi: https://doi.org/10.1115/1.4002902
Accurate Determination of Plastic Collapse Loads From Finite Element Analyses
J. Pressure Vessel Technol. February 2011, 133(1): 011202.
doi: https://doi.org/10.1115/1.4002770
The New Framework for Shell Buckling Design and the European Shell Buckling Recommendations Fifth Edition
J. Pressure Vessel Technol. February 2011, 133(1): 011203.
doi: https://doi.org/10.1115/1.4002565
Buckling of Thin Cylindrical Shells Under Locally Elevated Compressive Stresses
J. Pressure Vessel Technol. February 2011, 133(1): 011204.
doi: https://doi.org/10.1115/1.4002771
Topics:
Buckling
,
Stress
,
Strips
,
Shells
,
Compression
,
Compressive stress
,
Cylinders
,
Membranes
Buckling Design of Confined Steel Cylinders Under External Pressure
J. Pressure Vessel Technol. February 2011, 133(1): 011205.
doi: https://doi.org/10.1115/1.4002540
Topics:
Buckling
,
Cylinders
,
Pressure
,
Steel
,
Finite element analysis
,
External pressure
,
Design
Collapse of Nuclear Reactor SG Tubes Pressurized From Outside: The Influence of Imperfections
J. Pressure Vessel Technol. February 2011, 133(1): 011206.
doi: https://doi.org/10.1115/1.4002769
Topics:
Collapse
,
Hardening
,
Pressure
,
Stress
,
Buckling
,
External pressure
,
Nuclear reactors
Local Buckling of Tight Fit Liner Pipe
J. Pressure Vessel Technol. February 2011, 133(1): 011207.
doi: https://doi.org/10.1115/1.4003279
Fluid-Structure Interaction
Theoretical Determination of Modal Damping Ratio of Sloshing Using a Variational Method
J. Pressure Vessel Technol. February 2011, 133(1): 011301.
doi: https://doi.org/10.1115/1.4002057
Topics:
Damping
,
Sloshing
,
Variational techniques
,
Navier-Stokes equations
Materials and Fabrication
Fracture of Wrinkled Pipes Subjected to Monotonic Deformation: An Experimental Investigation
J. Pressure Vessel Technol. February 2011, 133(1): 011401.
doi: https://doi.org/10.1115/1.4002499
Topics:
Deformation
,
Fracture (Materials)
,
Fracture (Process)
,
Pipelines
,
Pipes
,
Stress
,
Failure mechanisms
,
Failure
,
Pressure
,
Strain gages
Failure of Ductile Materials Subject to Varying Strain Rates
J. Pressure Vessel Technol. February 2011, 133(1): 011402.
doi: https://doi.org/10.1115/1.4002054
Topics:
Aluminum alloys
,
Failure
,
Stress
,
Density
Pipeline Systems
The Effects of Residual Stress Distribution and Component Geometry on the Stress Intensity Factor of Surface Cracks
J. Pressure Vessel Technol. February 2011, 133(1): 011701.
doi: https://doi.org/10.1115/1.4002671
Topics:
Fracture (Materials)
,
Stress
,
Surface cracks
,
Geometry
,
Pipes
,
Tension
,
Compression
A New OCTG Strength Equation for Collapse Under External Load Only
J. Pressure Vessel Technol. February 2011, 133(1): 011702.
doi: https://doi.org/10.1115/1.4001947
Topics:
Collapse
,
Oil field pipes
,
Stress
,
American Petroleum Institute
Effect of Transitions in the Water Table and Soil Moisture Content on the Cathodic Protection of Buried Pipelines
J. Pressure Vessel Technol. February 2011, 133(1): 011703.
doi: https://doi.org/10.1115/1.4002255
Topics:
Pipelines
,
Pipes
,
Soil
,
Water
,
Electrical resistivity
,
Earth resistance
Develop Acceptance Criteria of Pressure Test of Buried Pipeline Using Uncertainty Analysis
J. Pressure Vessel Technol. February 2011, 133(1): 011704.
doi: https://doi.org/10.1115/1.4002263
Topics:
Pipelines
,
Pipes
,
Pressure
,
Temperature
,
Uncertainty
,
Uncertainty analysis
,
Pressure drop
Technology Reviews
A Survey of Fitness-for-Service Trends in Industry
J. Pressure Vessel Technol. February 2011, 133(1): 014001.
doi: https://doi.org/10.1115/1.4001946
Topics:
Fitness-for-service
Damping of Heat Exchanger Tubes in Liquids: Review and Design Guidelines
J. Pressure Vessel Technol. February 2011, 133(1): 014002.
doi: https://doi.org/10.1115/1.4000711
Topics:
Damping
,
Heat exchangers
,
Friction
Technical Briefs
Material Selection Methodology Used in Czech NPP
J. Pressure Vessel Technol. February 2011, 133(1): 014501.
doi: https://doi.org/10.1115/1.4001652
Topics:
Maintenance
,
Nuclear power stations
,
Materials properties
Experimental Study of Three-Dimensional Identification of Semi-Elliptical Crack on the Back Surface by Means of Direct-Current Electrical Potential Difference Method of Multiple-Point Measurement Type
J. Pressure Vessel Technol. February 2011, 133(1): 014502.
doi: https://doi.org/10.1115/1.4001918
Topics:
Fracture (Materials)
,
Electric potential
Assessment of the Code “PTCREEP” for IPHWR Pressure Tube Ballooning Study
J. Pressure Vessel Technol. February 2011, 133(1): 014503.
doi: https://doi.org/10.1115/1.4001921
Topics:
Pressure
,
Temperature
,
Accidents
,
Coolants
,
Deformation
A New Connection Structure Between Hydrogen Nozzle and Sphere Head in a Hydrofining Reactor
J. Pressure Vessel Technol. February 2011, 133(1): 014504.
doi: https://doi.org/10.1115/1.4002258
Topics:
Hydrogen
,
Nozzles
,
Stress
,
Stress concentration
,
Welding
,
Finite element model
,
Residual stresses
Materials Databases and Knowledge Management for Advanced Nuclear Technologies
J. Pressure Vessel Technol. February 2011, 133(1): 014505.
doi: https://doi.org/10.1115/1.4002262
Topics:
Collaboration
,
Databases
,
Knowledge management
,
Design
,
Nuclear power stations
Design Innovation
Using Multicell Kelvin Structure for Pressure Vessel
J. Pressure Vessel Technol. February 2011, 133(1): 015001.
doi: https://doi.org/10.1115/1.4002049
Topics:
Pressure vessels
,
Design
,
Storage
,
Shapes
,
Cylinders
Email alerts
RSS Feeds
Influence of water cover on the blast resistance of circular plates
J. Pressure Vessel Technol
Dynamic response and damage analysis of a large steel tank impacted by an explosive fragment
J. Pressure Vessel Technol
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of A Cannon
J. Pressure Vessel Technol
Crack Growth Prediction Based on Uncertain Parameters Using Ensemble Kalman Filter
J. Pressure Vessel Technol (December 2024)
