Volume 122 Issue 1 | J. Pressure Vessel Technol.

Topics: Pressure equipment , Pressure Equipment Directive , Pressure vessels , Stress , Design , Design engineering , Stress analysis (Engineering) , Vessels

PVRC Division on Continued Operation of Equipment

J. Robert Sims

J. Pressure Vessel Technol. February 2000, 122(1): 112–113. doi: https://doi.org/10.1115/1.556160

Abstract

View articletitled, PVRC Division on Continued Operation of Equipment

Open the PDF for in another window

Topics: American Petroleum Institute , Corrosion , Failure analysis , Fracture (Materials) , Inspection , Nozzles , Pressure vessels , Safety , Testing , Acceptance criteria

Technical Papers

Two-Step Approach of Stress Classification and Primary Structure Method

Ming-Wan Lu, Yong Chen, Jian-Guo Li

J. Pressure Vessel Technol. February 2000, 122(1): 2–8. doi: https://doi.org/10.1115/1.556139

Abstract

View articletitled, Two-Step Approach of Stress Classification and Primary Structure Method

Open the PDF for in another window

Topics: Stress

The Change in Overstrain Level Resulting From Machining of an Autofrettaged Thick-Walled Cylinder

M. Perl, Professor and Associate Dean of Engineering,

J. Pressure Vessel Technol. February 2000, 122(1): 9–14. doi: https://doi.org/10.1115/1.556145

Abstract

View articletitled, The Change in Overstrain Level Resulting From Machining of an Autofrettaged Thick-Walled Cylinder

Open the PDF for in another window

Topics: Autofrettage , Cylinders , Machining , Stress

Notch-Strengthening Phenomenon Under Creep-Fatigue Loading Conditions

N. Merah, Assistant Professor,

J. Pressure Vessel Technol. February 2000, 122(1): 15–21. doi: https://doi.org/10.1115/1.556140

Abstract

View articletitled, Notch-Strengthening Phenomenon Under Creep-Fatigue Loading Conditions

Open the PDF for in another window

Topics: Creep , Fatigue , Stress , Finite element analysis , Fatigue life , Cycles , Relaxation (Physics)

Creep Modeling of Welded Joints Using the Theta Projection Concept and Finite Element Analysis

M. Law, W. Payten, K. Snowden

J. Pressure Vessel Technol. February 2000, 122(1): 22–26. doi: https://doi.org/10.1115/1.556141

Abstract

View articletitled, Creep Modeling of Welded Joints Using the Theta Projection Concept and Finite Element Analysis

Open the PDF for in another window

Topics: Creep , Finite element analysis , Modeling , Stress , Welded joints , Pressure vessels

Residual Stress Distribution Depending on Welding Sequence in Multi-Pass Welded Joints With X-Shaped Groove

Masahito Mochizuki, Makoto Hayashi, Toshio Hattori

J. Pressure Vessel Technol. February 2000, 122(1): 27–32. doi: https://doi.org/10.1115/1.556142

Abstract

View articletitled, Residual Stress Distribution Depending on Welding Sequence in Multi-Pass Welded Joints With X-Shaped Groove

Open the PDF for in another window

Topics: Pipe joints , Stress , Welding , Stress concentration , Fracture (Process) , Stress corrosion cracking

Self-Excited Sloshing due to the Fluid Discharge Over a Flexible Cylindrical Weir

Hiroshi Nagakura, Shigehiko Kaneko

J. Pressure Vessel Technol. February 2000, 122(1): 33–39. doi: https://doi.org/10.1115/1.556143

Abstract

View articletitled, Self-Excited Sloshing due to the Fluid Discharge Over a Flexible Cylindrical Weir

Open the PDF for in another window

Topics: Fluids , Sloshing

Comparison Between Crack Growth in Fracture Mechanics Specimens and Feature Component Tests Carried Out in a Low-Alloy Steel

Kamran Nikbin

J. Pressure Vessel Technol. February 2000, 122(1): 40–44. doi: https://doi.org/10.1115/1.556147

Abstract

View articletitled, Comparison Between Crack Growth in Fracture Mechanics Specimens and Feature Component Tests Carried Out in a Low-Alloy Steel

Open the PDF for in another window

Topics: Creep , Fracture (Materials) , Fracture mechanics , Steel

Prediction of Materials Damage History From Stress Corrosion Cracking in Boiling Water Reactors

Iouri Balachov, Digby Macdonald, Bernhard Stellwag, Norbert Henzel, Renate Kilian

J. Pressure Vessel Technol. February 2000, 122(1): 45–49. doi: https://doi.org/10.1115/1.556148

Abstract

View articletitled, Prediction of Materials Damage History From Stress Corrosion Cracking in Boiling Water Reactors

Open the PDF for in another window

Topics: Boiling water reactors , Coolants , Damage , Fracture (Materials) , Stress corrosion cracking , Pumps , Hydrogen , Circuits , Water chemistry , Stainless steel

An Experimental Study of the Effect of Tube-to-Tube Ties on Fluidelastic Instability in an In-Line Tube Array

David S. Weaver, Paul Feenstra, Frank L. Eisinger

J. Pressure Vessel Technol. February 2000, 122(1): 50–54. doi: https://doi.org/10.1115/1.556149

Abstract

View articletitled, An Experimental Study of the Effect of Tube-to-Tube Ties on Fluidelastic Instability in an In-Line Tube Array

Open the PDF for in another window

Topics: Clamps (Tools) , Displacement , Flow (Dynamics) , Spectra (Spectroscopy) , Stability , Turbulence , Wind tunnels , Experimental design , Failure , Instrumentation

Technical Basis for Code Cases on Design of Ellipsoidal and Torispherical Heads for ASME Section VIII Vessels

Mahendra D. Rana, Senior Development Associate,, Arturs Kalnins, Professor of Mechanics,

J. Pressure Vessel Technol. February 2000, 122(1): 55–59. doi: https://doi.org/10.1115/1.556150

Abstract

View articletitled, Technical Basis for Code Cases on Design of Ellipsoidal and Torispherical Heads for ASME Section VIII Vessels

Open the PDF for in another window

Topics: Design , Failure , Stress , Vessels , Pressure , Failure mechanisms , Pressure vessels

Dynamic Behavior of Transportation Pressure Relief Valves Under Simulated Fire Impingement Conditions

A. J. Pierorazio, A. M. Birk

J. Pressure Vessel Technol. February 2000, 122(1): 60–65. doi: https://doi.org/10.1115/1.556151

Abstract

View articletitled, Dynamic Behavior of Transportation Pressure Relief Valves Under Simulated Fire Impingement Conditions

Open the PDF for in another window

Topics: Fire , Flow (Dynamics) , Pressure , Relief valves , Valves , Steam , Cycles , Accidents , Vessels

Calculation of Stress Relaxation Properties for Type 422 Stainless Steel

F. V. Ellis, Sebastian Tordonato

J. Pressure Vessel Technol. February 2000, 122(1): 66–71. doi: https://doi.org/10.1115/1.556152

Abstract

View articletitled, Calculation of Stress Relaxation Properties for Type 422 Stainless Steel

Open the PDF for in another window

Topics: Creep , Relaxation (Physics) , Rupture , Stress , Stainless steel , Temperature , Testing

Fitness for Service Evaluation of Ring Joint Groove Cracking

R. G. Brown, G. M. Buchheim, D. A. Osage, J. L. Janelle

J. Pressure Vessel Technol. February 2000, 122(1): 72–75. doi: https://doi.org/10.1115/1.556153

Abstract

View articletitled, Fitness for Service Evaluation of Ring Joint Groove Cracking

Open the PDF for in another window

Topics: Fitness-for-service , Flanges , Fracture (Materials) , Fracture (Process) , Fracture mechanics , Stress , Testing , Hydrogen , Overlays (Materials engineering) , Vessels

Weld Repair of Aged Cr-Mo Steel Piping—A Review of Literature

R. Viswanathan, Technical Fellow,, D. Gandy, Manager,

J. Pressure Vessel Technol. February 2000, 122(1): 76–85. doi: https://doi.org/10.1115/1.556154

Abstract

View articletitled, Weld Repair of Aged Cr-Mo Steel Piping—A Review of Literature

Open the PDF for in another window

Topics: Creep , Maintenance , Pipes , Rupture , Steel , Stress , Base metals , Welded joints , Temperature , Cavitation

Strip Yield Analysis of Plastic Zone Coalescence for Collinear Edge Crack and Internal Crack in a Semi-Infinite Sheet

Toshihiko Nishimura, Research Manager,

J. Pressure Vessel Technol. February 2000, 122(1): 86–89. doi: https://doi.org/10.1115/1.556144

Abstract

View articletitled, Strip Yield Analysis of Plastic Zone Coalescence for Collinear Edge Crack and Internal Crack in a Semi-Infinite Sheet

Open the PDF for in another window

Topics: Fracture (Materials) , Stress , Displacement

Waterjet Machining and Peening of Metals

M. Ramulu, S. Kunaporn, D. Arola, M. Hashish, J. Hopkins

J. Pressure Vessel Technol. February 2000, 122(1): 90–95. doi: https://doi.org/10.1115/1.556155

Abstract

View articletitled, Waterjet Machining and Peening of Metals

Open the PDF for in another window

Topics: Cutting , Deformation , Machining , Metals , Shot peening , Microhardness , High pressure (Physics) , Surface texture

Dynamical Modeling of Deepwater-Type Cylindrical Tuned Liquid Damper With a Submerged Net

Shigehiko Kaneko, Yasuo Mizota

J. Pressure Vessel Technol. February 2000, 122(1): 96–104. doi: https://doi.org/10.1115/1.556156

Abstract

View articletitled, Dynamical Modeling of Deepwater-Type Cylindrical Tuned Liquid Damper With a Submerged Net

Open the PDF for in another window

Topics: Dampers , Damping , Modeling , Oscillations , Sloshing , Transients (Dynamics) , Waves , Elevations (Drawings) , Fluids , Wave theory of light

Three-Dimensional Stress Criteria—Summary of the PVRC Project

Greg Hollinger, John Hechmer, Consultant,

J. Pressure Vessel Technol. February 2000, 122(1): 105–109. doi: https://doi.org/10.1115/1.556157

Abstract

View articletitled, Three-Dimensional Stress Criteria—Summary of the PVRC Project

Open the PDF for in another window

Topics: Finite element analysis , Stress , Membranes

Editorial

The Pressure Vessel Research Council of the Welding Research Council, Inc.

PVRC Task Group on Increased Allowable Stresses

PVRC Division on Continued Operation of Equipment

Technical Papers

Two-Step Approach of Stress Classification and Primary Structure Method

The Change in Overstrain Level Resulting From Machining of an Autofrettaged Thick-Walled Cylinder

Notch-Strengthening Phenomenon Under Creep-Fatigue Loading Conditions

Creep Modeling of Welded Joints Using the Theta Projection Concept and Finite Element Analysis

Residual Stress Distribution Depending on Welding Sequence in Multi-Pass Welded Joints With X-Shaped Groove

Self-Excited Sloshing due to the Fluid Discharge Over a Flexible Cylindrical Weir

Comparison Between Crack Growth in Fracture Mechanics Specimens and Feature Component Tests Carried Out in a Low-Alloy Steel

Prediction of Materials Damage History From Stress Corrosion Cracking in Boiling Water Reactors

An Experimental Study of the Effect of Tube-to-Tube Ties on Fluidelastic Instability in an In-Line Tube Array

Technical Basis for Code Cases on Design of Ellipsoidal and Torispherical Heads for ASME Section VIII Vessels

Dynamic Behavior of Transportation Pressure Relief Valves Under Simulated Fire Impingement Conditions

Calculation of Stress Relaxation Properties for Type 422 Stainless Steel

Fitness for Service Evaluation of Ring Joint Groove Cracking

Weld Repair of Aged Cr-Mo Steel Piping—A Review of Literature

Strip Yield Analysis of Plastic Zone Coalescence for Collinear Edge Crack and Internal Crack in a Semi-Infinite Sheet

Waterjet Machining and Peening of Metals

Dynamical Modeling of Deepwater-Type Cylindrical Tuned Liquid Damper With a Submerged Net

Three-Dimensional Stress Criteria—Summary of the PVRC Project

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only