Volume 8 Issue 1 | J. Micro Nano Sci. Eng.

Skip Nav Destination

Volume 8, Issue 1

March 2020

This article was originally published in

Journal of Micro and Nano-Manufacturing

ISSN 2166-0468

EISSN 2166-0476

Guest Editorial

Special Section on Recent Advancements in Micro- and Nano-Manufacturing From the WCMNM2019

Lawrence Kulinsky

J. Micro Nano-Manuf. March 2020, 8(1): 010301. doi: https://doi.org/10.1115/1.4046219

Extract

View articletitled, Special Section on Recent Advancements in Micro- and Nano-Manufacturing From the WCMNM2019

Open the PDF for in another window

Topics: Nanomanufacturing , Micromanufacturing

Special Section: Recent Advancements in Micro- and Nano-Manufacturing From the WCMNM2019—Part 1

An Innovative Laser Metasurface Fabrication Technique for Highly Flexible Optoelectronic Devices

Qinghua Wang, Haoxuan You, Zach Lowery, Songwei Li, Hao Fu, Ruoxing Wang, Caterina Lamuta, Fatima Toor, Wenzhuo Wu, Albert Ratner, Hongtao Ding

J. Micro Nano-Manuf. March 2020, 8(1): 010901. doi: https://doi.org/10.1115/1.4046032

Abstract

View articletitled, An Innovative Laser Metasurface Fabrication Technique for Highly Flexible Optoelectronic Devices

Open the PDF for in another window

Topics: Lasers , Manufacturing , Optoelectronic devices , Durability , Fatigue

In Situ Measurement of Carbon Nanotube Growth Kinetics in a Rapid Thermal Chemical Vapor Deposition Reactor With Multizone Infrared Heating

Moataz Abdulhafez, Jaegeun Lee, Mostafa Bedewy

J. Micro Nano-Manuf. March 2020, 8(1): 010902. doi: https://doi.org/10.1115/1.4046033

Abstract

View articletitled, In Situ Measurement of Carbon Nanotube Growth Kinetics in a Rapid Thermal Chemical Vapor Deposition Reactor With Multizone Infrared Heating

Open the PDF for in another window

Topics: Carbon nanotubes , Chemical vapor deposition , Heating , Catalysts , Image processing , Rapid thermal processing

Scanning Micro-Electrochemical Machining Process for V-Shaped Grooves

Hao Zhong, Hao Tong, Zhiqiang Wang, Yong Li, Yubin Pu

J. Micro Nano-Manuf. March 2020, 8(1): 010903. doi: https://doi.org/10.1115/1.4046036

Abstract

View articletitled, Scanning Micro-Electrochemical Machining Process for V-Shaped Grooves

Open the PDF for in another window

Topics: Electrodes , Machining , Machinery , Electrical discharge machining

Study on Laser-Induced Oxidation of Ti₆Al₄V Alloy Under Two Different Reactive Atmospheres

Wei Zhao, Guolong Zhao, Ning He, Liang Li, Asif Iqbal

J. Micro Nano-Manuf. March 2020, 8(1): 010904. doi: https://doi.org/10.1115/1.4046037

Abstract

View articletitled, Study on Laser-Induced Oxidation of Ti6Al4V Alloy Under Two Different Reactive Atmospheres

Open the PDF for in another window

Topics: Lasers , Oxidation , Oxygen , Fluence (Radiation measurement) , Alloys

Improvements in Accuracy of Fused Deposition Modeling Via Integration of Low-Cost On-Board Vision Systems

Vito Basile, Francesco Modica, Gianmauro Fontana, Serena Ruggeri, Irene Fassi

J. Micro Nano-Manuf. March 2020, 8(1): 010905. doi: https://doi.org/10.1115/1.4046038

Abstract

View articletitled, Improvements in Accuracy of Fused Deposition Modeling Via Integration of Low-Cost On-Board Vision Systems

Open the PDF for in another window

Topics: Calibration , Image processing , Machinery , Manufacturing , Modeling , Geometry , Micromanufacturing

Electrical Discharge/Electrochemical Hybrid Machining Based on the Same Machine and Tool Electrode

Ryoichiro Kishi, Jiwang Yan

J. Micro Nano-Manuf. March 2020, 8(1): 010906. doi: https://doi.org/10.1115/1.4046039

Abstract

View articletitled, Electrical Discharge/Electrochemical Hybrid Machining Based on the Same Machine and Tool Electrode

Open the PDF for in another window

Topics: Electrical discharge machining , Electrodes , Machining , Rotation , Machinery , Surface roughness

Multiscale Surface Patterning of Zirconia by Picosecond Pulsed Laser Irradiation

Yuka Yamamuro, Tomotaka Shimoyama, Isao Yamashita, Jiwang Yan

J. Micro Nano-Manuf. March 2020, 8(1): 010907. doi: https://doi.org/10.1115/1.4046040

Abstract

View articletitled, Multiscale Surface Patterning of Zirconia by Picosecond Pulsed Laser Irradiation

Open the PDF for in another window

Topics: Irradiation (Radiation exposure) , Lasers , Phase transitions , Fluence (Radiation measurement)

Laser Surface Modification of Wire-Electric Discharge Machined Graphene Nanoparticle Reinforced SiC Composites

Meinam Annebushan Singh, Ondrej Hanzel, Ramesh Kumar Singh, Pavol Šajgalík, Deepak Marla

J. Micro Nano-Manuf. March 2020, 8(1): 010908. doi: https://doi.org/10.1115/1.4046041

Abstract

View articletitled, Laser Surface Modification of Wire-Electric Discharge Machined Graphene Nanoparticle Reinforced SiC Composites

Open the PDF for in another window

Topics: Lasers , Wire

A Benchmark Artifact to Evaluate the Manufacturing of Microfeatures by Digital Light Processing Stereolithography

Lara Rebaioli, Irene Fassi

J. Micro Nano-Manuf. March 2020, 8(1): 010909. doi: https://doi.org/10.1115/1.4046042

Abstract

View articletitled, A Benchmark Artifact to Evaluate the Manufacturing of Microfeatures by Digital Light Processing Stereolithography

Open the PDF for in another window

Topics: Manufacturing , Stereolithography , Dimensions , Errors , Resins

Scaling Anomaly in the Mechanical Response in Microscale Reverse Extrusion of Copper

Bin Zhang, W. J. Meng

J. Micro Nano-Manuf. March 2020, 8(1): 010910. doi: https://doi.org/10.1115/1.4046043

Abstract

View articletitled, Scaling Anomaly in the Mechanical Response in Microscale Reverse Extrusion of Copper

Open the PDF for in another window

Topics: Extruding , Grain size , Microscale devices , Stress , Metalworking , Electron backscatter diffraction , Flow (Dynamics)

Characterization of a Custom-Made Digital Light Processing Stereolithographic Printer Based on a Slanted Groove Micromixer Geometry

Joško Valentinčič, Miha Prijatelj, Marko Jerman, Andrej Lebar, Izidor Sabotin

J. Micro Nano-Manuf. March 2020, 8(1): 010911. doi: https://doi.org/10.1115/1.4046044

Abstract

View articletitled, Characterization of a Custom-Made Digital Light Processing Stereolithographic Printer Based on a Slanted Groove Micromixer Geometry

Open the PDF for in another window

Topics: Dimensions , Geometry , Photopolymers , Printing , Resolution (Optics) , Stereolithography , Design , Microfluidics

Effect of Feedstock Properties on Extrusion of High Aspect Ratio Microbi-Lumen Tubes

Sandeep Kuriakose, Paolo Parenti, Massimiliano Annoni

J. Micro Nano-Manuf. March 2020, 8(1): 010912. doi: https://doi.org/10.1115/1.4046096

Abstract

View articletitled, Effect of Feedstock Properties on Extrusion of High Aspect Ratio Microbi-Lumen Tubes

Open the PDF for in another window

Topics: Extruding , Feedstock , Binders (Materials) , Surface quality

Lotus-Leaf Inspired Surfaces: Hydrophobicity Evolution of Replicas Due to Mechanical Cleaning and Mold Wear

Jean-Michel Romano, Antonio Garcia-Giron, Pavel Penchev, Mert Gulcur, Ben R. Whiteside, Stefan Dimov

J. Micro Nano-Manuf. March 2020, 8(1): 010913. doi: https://doi.org/10.1115/1.4046097

Abstract

View articletitled, Lotus-Leaf Inspired Surfaces: Hydrophobicity Evolution of Replicas Due to Mechanical Cleaning and Mold Wear

Open the PDF for in another window

Topics: Abrasion , Cycles , Lasers , Molding , Wear , Wetting , Injection molding , Hydrophobicity

Regular Papers

Correlation of Three-Dimensional Roughness Parameters With the Crater Dimensions in μED-Milling of Cryogenic-Treated Tool and Workpiece

J. M. Jafferson, P. Hariharan, J. Ramkumar

J. Micro Nano-Manuf. March 2020, 8(1): 011001. doi: https://doi.org/10.1115/1.4045912

Abstract

View articletitled, Correlation of Three-Dimensional Roughness Parameters With the Crater Dimensions in μED-Milling of Cryogenic-Treated Tool and Workpiece

Open the PDF for in another window

Topics: Dimensions , Milling , Surface roughness , Microchannels , Machining , Erosion

Inline LIPSS Monitoring Method Employing Light Diffraction

Aleksandra Michalek, Tahseen Jwad, Pavel Penchev, Tian Long See, Stefan Dimov

J. Micro Nano-Manuf. March 2020, 8(1): 011002. doi: https://doi.org/10.1115/1.4045681

Abstract

View articletitled, Inline LIPSS Monitoring Method Employing Light Diffraction

Open the PDF for in another window

Topics: Diffraction , Lasers , Reflectance

Material-Oriented Regularization Toward Solving Manufacturing Inverse Problem in Ion Beam Microprocessing

Q. Zhang, X. P. Zhu, B. Zhu, M. K. Lei, D. M. Guo

J. Micro Nano-Manuf. March 2020, 8(1): 011003. doi: https://doi.org/10.1115/1.4045763

Abstract

View articletitled, Material-Oriented Regularization Toward Solving Manufacturing Inverse Problem in Ion Beam Microprocessing

Open the PDF for in another window

Topics: Inverse problems , Manufacturing , Stress , Thermal energy , Tungsten

Creating Metal Molds for Directional Gecko-Inspired Adhesives

Capella Kerst, Srinivasan A. Suresh, Mark R. Cutkosky

J. Micro Nano-Manuf. March 2020, 8(1): 011004. doi: https://doi.org/10.1115/1.4045764

Abstract

View articletitled, Creating Metal Molds for Directional Gecko-Inspired Adhesives

Open the PDF for in another window

Topics: Adhesives , Geometry , Manufacturing , Metals , Wedges , Adhesion

Microstructure and Tensile Performance of Graphene-Reinforced Inconel 718 Alloy Via Selective Laser Melting and Post-Treatments

Yachao Wang, Jing Shi

J. Micro Nano-Manuf. March 2020, 8(1): 011005. doi: https://doi.org/10.1115/1.4045765

Abstract

View articletitled, Microstructure and Tensile Performance of Graphene-Reinforced Inconel 718 Alloy Via Selective Laser Melting and Post-Treatments

Open the PDF for in another window

Topics: Alloys , Composite materials , Graphene , Lasers , Melting , Metals , Temperature , Tensile strength , Stress , Bonding

Technical Brief

Numerical Investigation of Effect of Operating Parameters on the Phase Transformation During Vibration-Assisted Nano-Impact Machining of Silicon by Loose Abrasives

Nick H. Duong, Jianfeng Ma, Muhammad P. Jahan, Shuting Lei, Vamshi Krishna Kore, Murali Sundaram

J. Micro Nano-Manuf. March 2020, 8(1): 014501. doi: https://doi.org/10.1115/1.4045762

Abstract

View articletitled, Numerical Investigation of Effect of Operating Parameters on the Phase Transformation During Vibration-Assisted Nano-Impact Machining of Silicon by Loose Abrasives

Open the PDF for in another window

Topics: Abrasives , Finite element methods , Machining , Phase transitions , Silicon , Vibration , Friction , Particulate matter

Guest Editorial

Special Section on Recent Advancements in Micro- and Nano-Manufacturing From the WCMNM2019

Special Section: Recent Advancements in Micro- and Nano-Manufacturing From the WCMNM2019—Part 1

An Innovative Laser Metasurface Fabrication Technique for Highly Flexible Optoelectronic Devices

In Situ Measurement of Carbon Nanotube Growth Kinetics in a Rapid Thermal Chemical Vapor Deposition Reactor With Multizone Infrared Heating

Scanning Micro-Electrochemical Machining Process for V-Shaped Grooves

Study on Laser-Induced Oxidation of Ti₆Al₄V Alloy Under Two Different Reactive Atmospheres

Improvements in Accuracy of Fused Deposition Modeling Via Integration of Low-Cost On-Board Vision Systems

Electrical Discharge/Electrochemical Hybrid Machining Based on the Same Machine and Tool Electrode

Multiscale Surface Patterning of Zirconia by Picosecond Pulsed Laser Irradiation

Laser Surface Modification of Wire-Electric Discharge Machined Graphene Nanoparticle Reinforced SiC Composites

A Benchmark Artifact to Evaluate the Manufacturing of Microfeatures by Digital Light Processing Stereolithography

Scaling Anomaly in the Mechanical Response in Microscale Reverse Extrusion of Copper

Characterization of a Custom-Made Digital Light Processing Stereolithographic Printer Based on a Slanted Groove Micromixer Geometry

Effect of Feedstock Properties on Extrusion of High Aspect Ratio Microbi-Lumen Tubes

Lotus-Leaf Inspired Surfaces: Hydrophobicity Evolution of Replicas Due to Mechanical Cleaning and Mold Wear

Regular Papers

Correlation of Three-Dimensional Roughness Parameters With the Crater Dimensions in μED-Milling of Cryogenic-Treated Tool and Workpiece

Inline LIPSS Monitoring Method Employing Light Diffraction

Material-Oriented Regularization Toward Solving Manufacturing Inverse Problem in Ion Beam Microprocessing

Creating Metal Molds for Directional Gecko-Inspired Adhesives

Microstructure and Tensile Performance of Graphene-Reinforced Inconel 718 Alloy Via Selective Laser Melting and Post-Treatments

Technical Brief

Numerical Investigation of Effect of Operating Parameters on the Phase Transformation During Vibration-Assisted Nano-Impact Machining of Silicon by Loose Abrasives

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Guest Editorial

Special Section: Recent Advancements in Micro- and Nano-Manufacturing From the WCMNM2019—Part 1

Regular Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only