...Yu Zhang; Zhiyong Wang; Hongzhi Yan To reduce the wear, an optimization method of hypoid gears with the objective of minimizing the pinion sliding ratio is proposed. First, the sliding ratio model of the hypoid gear is established on the basis of the spatial gear meshing theory. Furthermore...

...Xingyu Yang; Chaosheng Song; Caichao Zhu; Siyuan Liu; Chengcheng Liang Hypoid gear with small cone angle and large pitch cone distance can be directed at the transmission with low shaft angle (LSA). The manufacturing process has more freedoms of motion to control the tooth surface and ensure higher...

...Alessio Artoni; Marco Gabiccini; Massimo Guiggiani; Ahmet Kahraman Microgeometry optimization has become an important phase of gear design that can remarkably enhance gear performance. For spiral bevel and hypoid gears, microgeometry is typically represented by ease-off topography. The optimal ease...

... Publication 1212, AVSCOM Technical Report No. 88-C-035. Wang , X. C. , and Ghosh , S. K. , 1994 , Advanced Theories of Hypoid Gears , Elsevier , Amsterdam . Phillips , J. , 2003 , General Spatial Involute Gearing , Springer-Verlag , Berlin . Simon , V. , 1996...

...M. Kolivand; A. Kahraman Actual hypoid gear tooth surfaces do deviate from the theoretical ones either globally due to manufacturing errors or locally due to reasons such as tooth surface wear. A practical methodology based on ease-off topography is proposed here for loaded tooth contact analysis...

...Qimi Jiang; Claude Gosselin; Jack Masseth During hypoid gears lapping process, a gear set is running at varying operating positions and under a light load in order to lap the complete tooth surface. The pinions and gears are lapped in pairs. Hence, their tooth surfaces are not only cutters but also...

...Qimi Jiang; Claude Gosselin; Jack Masseth In the lapping process of hypoid gears, a gear set is run at varying operating positions and under a light load in order to lap the complete tooth surface. Because of the rolling and sliding motion inherent to hypoid gears, the lapping compound acts...

...Hermann J. Stadtfeld, Vice President Research and Development; Uwe Gaiser, Manager Application Engineering The innovation was to develop a gear geometry that reduces or eliminates gear noise and increases the strength of gears. Gear noise is a common problem in all bevel and hypoid gear drives...