Volume 128 Issue 6 | J. Mech. Des. | ASME Digital Collection

Topics: Algorithms , Design , Optimization , Robots , Spectral energy distribution , Topology , Density , Finite element analysis , Bone , Control equipment

Versatile Formulation for Multiobjective Reliability-Based Design Optimization

T. Zou, S. Mahadevan

J. Mech. Des. November 2006, 128(6): 1217–1226. doi: https://doi.org/10.1115/1.2218884

Abstract

View articletitled, Versatile Formulation for Multiobjective Reliability-Based Design Optimization

Open the PDF for in another window

Topics: Design , Doors , Event history analysis , Failure , Noise (Sound) , Optimization , Pareto optimization , Probability , Reliability , Wind

Failure Surface Frontier for Reliability Assessment on Expensive Performance Function

Songqing Shan, G. Gary Wang

J. Mech. Des. November 2006, 128(6): 1227–1235. doi: https://doi.org/10.1115/1.2337311

Abstract

View articletitled, Failure Surface Frontier for Reliability Assessment on Expensive Performance Function

Open the PDF for in another window

Topics: Failure , Reliability , Probability

Velocity Effects on Robotic Manipulator Dynamic Performance

Alan P. Bowling, ChangHwan Kim

J. Mech. Des. November 2006, 128(6): 1236–1245. doi: https://doi.org/10.1115/1.2336255

Abstract

View articletitled, Velocity Effects on Robotic Manipulator Dynamic Performance

Open the PDF for in another window

Topics: Actuators , End effectors , Manipulators , Torque , Optimization , Rotors

Reliability and Efficiency of the Existing Spectral Methods for Isomorphism Detection

Rajesh Pavan Sunkari, Linda C. Schmidt

J. Mech. Des. November 2006, 128(6): 1246–1252. doi: https://doi.org/10.1115/1.2336253

Abstract

View articletitled, Reliability and Efficiency of the Existing Spectral Methods for Isomorphism Detection

Open the PDF for in another window

Topics: Chain , Eigenvalues , Kinematic chains , Polynomials , Reliability , Degrees of freedom , Algorithms

Optimal Synthesis of Cam-Linkage Mechanisms for Precise Path Generation

D. Mundo, J. Y. Liu, H. S. Yan

J. Mech. Des. November 2006, 128(6): 1253–1260. doi: https://doi.org/10.1115/1.2337317

Abstract

View articletitled, Optimal Synthesis of Cam-Linkage Mechanisms for Precise Path Generation

Open the PDF for in another window

Topics: Linkages , Optimization , Kinematics

Mobility of Single-Loop N-Bar Linkage With Active/Passive Prismatic Joints

W. Z. Guo, R. Du

J. Mech. Des. November 2006, 128(6): 1261–1271. doi: https://doi.org/10.1115/1.2337315

Abstract

View articletitled, Mobility of Single-Loop N-Bar Linkage With Active/Passive Prismatic Joints

Open the PDF for in another window

Topics: Linkages , Mechanical admittance

Ultimate Limits for Counterweight Balancing of Crank-Rocker Four-Bar Linkages

Bram Demeulenaere, Erwin Aertbeliën, Myriam Verschuure, Jan Swevers, Joris De Schutter

J. Mech. Des. November 2006, 128(6): 1272–1284. doi: https://doi.org/10.1115/1.2337313

Abstract

View articletitled, Ultimate Limits for Counterweight Balancing of Crank-Rocker Four-Bar Linkages

Open the PDF for in another window

Topics: Optimization

Robust Design of Cellular Materials With Topological and Dimensional Imperfections

Carolyn Conner Seepersad, Janet K. Allen, David L. McDowell, Farrokh Mistree

J. Mech. Des. November 2006, 128(6): 1285–1297. doi: https://doi.org/10.1115/1.2338575

Abstract

View articletitled, Robust Design of Cellular Materials With Topological and Dimensional Imperfections

Open the PDF for in another window

Topics: Design , Topology , Elastic constants

Synthesis of Bistable Periodic Structures Using Topology Optimization and a Genetic Algorithm

J. Prasad, A. R. Diaz

J. Mech. Des. November 2006, 128(6): 1298–1306. doi: https://doi.org/10.1115/1.2338576

Abstract

View articletitled, Synthesis of Bistable Periodic Structures Using Topology Optimization and a Genetic Algorithm

Open the PDF for in another window

Topics: Design , Genetic algorithms , Optimization , Periodic structures , Stress , Topology , Deformation , Displacement

Application of Matroid Method in Kinematic Analysis of Parallel Axes Epicyclic Gear Trains

Ilie Talpasanu, T. C. Yih, P. A. Simionescu

J. Mech. Des. November 2006, 128(6): 1307–1314. doi: https://doi.org/10.1115/1.2337310

Abstract

View articletitled, Application of Matroid Method in Kinematic Analysis of Parallel Axes Epicyclic Gear Trains

Open the PDF for in another window

Topics: Circuits , Cycles , Degrees of freedom , Gears , Kinematic analysis , Planetary gears , Trains , Gear trains , Rotation , Wheels

Computerized Modeling and Simulation of Spiral Bevel and Hypoid Gears Manufactured by Gleason Face Hobbing Process

Qi Fan, Ph.D.

J. Mech. Des. November 2006, 128(6): 1315–1327. doi: https://doi.org/10.1115/1.2337316

Abstract

View articletitled, Computerized Modeling and Simulation of Spiral Bevel and Hypoid Gears Manufactured by Gleason Face Hobbing Process

Open the PDF for in another window

Topics: Blades , Cutting , Gears , Machinery , Modeling , Simulation , Spiral bevel gears , Geometry , Design , Generators

Nonlinear Strain Hardening Model for Predicting Clamp Load Loss in Bolted Joints

Sayed A. Nassar, Payam H. Matin

J. Mech. Des. November 2006, 128(6): 1328–1336. doi: https://doi.org/10.1115/1.2214736

Abstract

View articletitled, Nonlinear Strain Hardening Model for Predicting Clamp Load Loss in Bolted Joints

Open the PDF for in another window

Topics: Clamps (Tools) , Fasteners , Stress , Work hardening , Tension , Bolted joints

Reduction of Stress Concentration in Bolt-Nut Connectors

Sriman Venkatesan, Gary L. Kinzel

J. Mech. Des. November 2006, 128(6): 1337–1342. doi: https://doi.org/10.1115/1.2336254

Abstract

View articletitled, Reduction of Stress Concentration in Bolt-Nut Connectors

Open the PDF for in another window

Topics: Design , Stress , Stress concentration , Thread

Technical Briefs

A Note on the Diagonalizability and the Jordan Form of the 4×4 Homogeneous Transformation Matrix

Sangamesh Deepak R, Ashitava Ghosal

J. Mech. Des. November 2006, 128(6): 1343–1348. doi: https://doi.org/10.1115/1.2338579

Abstract

View articletitled, A Note on the Diagonalizability and the Jordan Form of the 4×4 Homogeneous Transformation Matrix

Open the PDF for in another window

Topics: Displacement , Eigenvalues , Screws , Manipulators , Rotation

Solving Driving Forces of 2(3-SPR) Serial-Parallel Manipulator by CAD Variation Geometry Approach

Yi Lu, Bo Hu

J. Mech. Des. November 2006, 128(6): 1349–1351. doi: https://doi.org/10.1115/1.2338577

Abstract

View articletitled, Solving Driving Forces of 2(3-SPR) Serial-Parallel Manipulator by CAD Variation Geometry Approach

Open the PDF for in another window

Topics: Computer-aided design , Dimensions , Geometry , Manipulators , Simulation , Chain

Analytical Behavior Law for a Constant Pitch Conical Compression Spring

Emmanuel Rodriguez, Manuel Paredes, Marc Sartor

J. Mech. Des. November 2006, 128(6): 1352–1356. doi: https://doi.org/10.1115/1.2338580

Abstract

View articletitled, Analytical Behavior Law for a Constant Pitch Conical Compression Spring

Open the PDF for in another window

Topics: Compression , Springs , Stress , Deflection , Polynomials

Computation of Member Stiffness in the Design of Bolted Joints

Joseph C. Musto, Nicholas R. Konkle

J. Mech. Des. November 2006, 128(6): 1357–1360. doi: https://doi.org/10.1115/1.2338578

Abstract

View articletitled, Computation of Member Stiffness in the Design of Bolted Joints

Open the PDF for in another window

Topics: Aluminum , Design , Finite element analysis , Steel , Stiffness , Bolted joints , Computation

The Effects of Oblique Running and Ideal Motion on Stress Analysis of Bridge Crane Wheels

Mine Demirsoy

J. Mech. Des. November 2006, 128(6): 1361–1365. doi: https://doi.org/10.1115/1.2218886

Abstract

View articletitled, The Effects of Oblique Running and Ideal Motion on Stress Analysis of Bridge Crane Wheels

Open the PDF for in another window

Topics: Cranes , Wheels , Gantry cranes , Stress , Stress analysis (Engineering)

Erratum

Erratum: “Stiffness of Cable-based Parallel Manipulators With Application to Stability Analysis” [Journal of Mechanical Design, 2006, 128(1), pp. 303–310]

Saeed Behzadipour, Amir Khajepour

J. Mech. Des. November 2006, 128(6): 1366. doi: https://doi.org/10.1115/1.2354439

Extract

View articletitled, Erratum: “Stiffness of Cable-based Parallel Manipulators With Application to Stability Analysis” [<span class="related-article">Journal of Mechanical Design, 2006, 128(1), pp. 303–310</span>]

Open the PDF for in another window

Topics: Cables , Design engineering , Manipulators , Stability , Stiffness

Editorial

Editorial

Research Papers

Integrating Target Costing Into Perception-Based Concept Evaluation of Complex and Large-Scale Systems Using Simultaneously Decomposed QFD

Balancing Marketing and Manufacturing Objectives in Product Line Design

Topology Optimization Using a Hybrid Cellular Automaton Method With Local Control Rules

Versatile Formulation for Multiobjective Reliability-Based Design Optimization

Failure Surface Frontier for Reliability Assessment on Expensive Performance Function

Velocity Effects on Robotic Manipulator Dynamic Performance

Reliability and Efficiency of the Existing Spectral Methods for Isomorphism Detection

Optimal Synthesis of Cam-Linkage Mechanisms for Precise Path Generation

Mobility of Single-Loop N-Bar Linkage With Active/Passive Prismatic Joints

Ultimate Limits for Counterweight Balancing of Crank-Rocker Four-Bar Linkages

Robust Design of Cellular Materials With Topological and Dimensional Imperfections

Synthesis of Bistable Periodic Structures Using Topology Optimization and a Genetic Algorithm

Application of Matroid Method in Kinematic Analysis of Parallel Axes Epicyclic Gear Trains

Computerized Modeling and Simulation of Spiral Bevel and Hypoid Gears Manufactured by Gleason Face Hobbing Process

Nonlinear Strain Hardening Model for Predicting Clamp Load Loss in Bolted Joints

Reduction of Stress Concentration in Bolt-Nut Connectors

Technical Briefs

A Note on the Diagonalizability and the Jordan Form of the 4×4 Homogeneous Transformation Matrix

Solving Driving Forces of 2(3-SPR) Serial-Parallel Manipulator by CAD Variation Geometry Approach

Analytical Behavior Law for a Constant Pitch Conical Compression Spring

Computation of Member Stiffness in the Design of Bolted Joints

The Effects of Oblique Running and Ideal Motion on Stress Analysis of Bridge Crane Wheels

Erratum

Erratum: “Stiffness of Cable-based Parallel Manipulators With Application to Stability Analysis” [Journal of Mechanical Design, 2006, 128(1), pp. 303–310]

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Editorial

Research Papers

Technical Briefs

Erratum

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only