Skip Nav Destination
Issues
September 1985
This article was originally published in
Journal of Mechanisms, Transmissions, and Automation in Design
ISSN 0738-0666
Research Papers
Design Automation Papers
Finite Element Mesh Generation of Planar Surfaces Using an Interactive Node Point Placement Technique
J. Mech., Trans., and Automation. September 1985, 107(3): 326–333.
doi: https://doi.org/10.1115/1.3260717
Topics:
Finite element analysis
,
Mesh generation
,
Particulate matter
,
Shapes
Numerical Considerations in Structural Component Shape Optimization
J. Mech., Trans., and Automation. September 1985, 107(3): 334–339.
doi: https://doi.org/10.1115/1.3260718
A Statistical Analysis as a Criterion of Soil-Machine System
J. Mech., Trans., and Automation. September 1985, 107(3): 340–345.
doi: https://doi.org/10.1115/1.3260719
Topics:
Machinery
,
Soil
,
Statistical analysis
Design of Machine Tool Spindles Based on Transient Analysis
J. Mech., Trans., and Automation. September 1985, 107(3): 346–352.
doi: https://doi.org/10.1115/1.3260720
Topics:
Design
,
Machine tool spindles
,
Transient analysis
,
Displacement
,
Bearings
,
Computation
,
Computers
,
Dampers
,
Dynamic response
,
Equations of motion
Mechanisms Papers
Displacement Analysis of Spatial Six-Link, 5R-C Mechanisms: A General Solution
J. Mech., Trans., and Automation. September 1985, 107(3): 353–357.
doi: https://doi.org/10.1115/1.3260721
Topics:
Displacement
Euler Parameters in Computational Kinematics and Dynamics. Part 1
J. Mech., Trans., and Automation. September 1985, 107(3): 358–365.
doi: https://doi.org/10.1115/1.3260722
Topics:
Dynamics (Mechanics)
,
Kinematics
,
Computer software
,
Computers
,
Dynamic analysis
,
Equations of motion
Euler Parameters in Computational Kinematics and Dynamics. Part 2
J. Mech., Trans., and Automation. September 1985, 107(3): 366–369.
doi: https://doi.org/10.1115/1.3260723
Topics:
Dynamics (Mechanics)
,
Kinematics
,
Equations of motion
,
Algorithms
,
Computation
Improved Centerpoint Curve Generation Techniques for Four-Precision Position Synthesis Using the Complex Number Approach
J. Mech., Trans., and Automation. September 1985, 107(3): 370–376.
doi: https://doi.org/10.1115/1.3260724
Topics:
Computation
,
Errors
,
Linkages
,
Shapes
The Elliptic Polarity of Screws
J. Mech., Trans., and Automation. September 1985, 107(3): 377–386.
doi: https://doi.org/10.1115/1.3260725
Topics:
Screws
,
Manipulators
,
Modeling
Application of Kinematically Compatible Rolling-Contact Pairs to the Design of Low-Friction Rocker-Pivots
J. Mech., Trans., and Automation. September 1985, 107(3): 388–393.
doi: https://doi.org/10.1115/1.3260728
Topics:
Design
,
Friction
,
Rolling contact
,
Rolling bearings
,
Stability
,
Trains
,
Valves
Mobility Conditions for Planar Linkages Using Triangle Inequality and Graphical Interpretation
J. Mech., Trans., and Automation. September 1985, 107(3): 394–399.
doi: https://doi.org/10.1115/1.3260729
Topics:
Linkages
,
Mechanical admittance
,
Computation
,
Computer-aided engineering
On the Intrinsic Properties of Point Trajectories in Three-Dimensional Kinematics
J. Mech., Trans., and Automation. September 1985, 107(3): 401–405.
doi: https://doi.org/10.1115/1.3260732
Topics:
Kinematics
,
Design
,
Control systems
,
Manipulators
,
Torsion
,
Trajectories (Physics)
Power Transmission and Gearing Papers
Simple Stress Formulae for a Thin-Rimmed Spur Gear. Part 1: Derivation of Approximation Formulae for Tooth Fillet and Root Stresses
J. Mech., Trans., and Automation. September 1985, 107(3): 406–411.
doi: https://doi.org/10.1115/1.3260733
Topics:
Approximation
,
Spur gears
,
Stress
,
Finite element methods
Simple Stress Formulae for a Thin-Rimmed Spur Gear. Part 2: Tooth Fillet and Root Stress Calculation of a Thin-Rimmed Internal Spur Gear
J. Mech., Trans., and Automation. September 1985, 107(3): 412–417.
doi: https://doi.org/10.1115/1.3260734
Topics:
Spur gears
,
Stress
,
Approximation
,
Gears
Simple Stress Formulae for a Thin-Rimmed Spur Gear. Part 3: Examination of the Calculation Method and Stress State of Internal Spur Gear
J. Mech., Trans., and Automation. September 1985, 107(3): 418–422.
doi: https://doi.org/10.1115/1.3260735
Topics:
Computational methods
,
Spur gears
,
Stress
,
Gears
,
Finite element methods
,
Finite element model
,
Rollers
Dynamic Load Factors in Internal Spur Gear Drives
J. Mech., Trans., and Automation. September 1985, 107(3): 424–429.
doi: https://doi.org/10.1115/1.3260739
Topics:
Spur gears
,
Stress
,
Computers
,
Deflection
,
Gears
On the Dynamic Gear Tooth Loading of Planetary Gearing as Affected by Bearing Clearances in High-Speed Machinery
J. Mech., Trans., and Automation. September 1985, 107(3): 430–436.
doi: https://doi.org/10.1115/1.3260740
Topics:
Bearings
,
Gear teeth
,
Machinery
,
Planetary gears
,
Clearances (Engineering)
,
Kinematics
,
Dynamic analysis
,
Spur gears
Simulation of Dual Drive Branched Gear Systems During Selective Engagement of the Prime Movers
J. Mech., Trans., and Automation. September 1985, 107(3): 437–442.
doi: https://doi.org/10.1115/1.3260741
Topics:
Gears
,
Simulation
,
Stress
,
Computer simulation
,
Friction
,
Inertia (Mechanics)
,
Separation (Technology)
,
Transients (Dynamics)
,
Vibration
Discussions
Discussion: “The Elliptic Polarity of Screws” (Lipkin, H., and Duffy, J., 1985, ASME J. Mech. Transm. Autom. Des., 107, pp. 377–386)
J. Mech., Trans., and Automation. September 1985, 107(3): 386–387.
doi: https://doi.org/10.1115/1.3260726
Topics:
Screws
Closure to “Discussion of ‘The Elliptic Polarity of Screws’” (1985, ASME J. Mech. Transm. Autom. Des., 107, pp. 386–387)
J. Mech., Trans., and Automation. September 1985, 107(3): 387.
doi: https://doi.org/10.1115/1.3260727
Discussion: “Mobility Conditions for Planar Linkages Using Triangle Inequality and Graphical Interpretation” (Midha, A., Zhao, Z.-L., and Her, I., 1985, ASME J. Mech. Transm. Autom. Des., 107, pp. 394–399)
J. Mech., Trans., and Automation. September 1985, 107(3): 399–400.
doi: https://doi.org/10.1115/1.3260730
Topics:
Linkages
,
Mechanical admittance
Closure to “Discussion of ‘Mobility Conditions for Planar Linkages Using Triangle Inequality and Graphical Interpretation’” (1985, ASME J. Mech. Transm. Autom. Des., 107, pp. 399–400)
J. Mech., Trans., and Automation. September 1985, 107(3): 400.
doi: https://doi.org/10.1115/1.3260731
Topics:
Linkages
,
Mechanical admittance
Discussion: “Simple Stress Formulae for a Thin-Rimmed Spur Gear. Parts 1, 2, and 3” (Chong, T. H., and Kubo, A., 1985, ASME J. Mech. Transm. Autom. Des., 107, 406–422)
J. Mech., Trans., and Automation. September 1985, 107(3): 422.
doi: https://doi.org/10.1115/1.3260736
Topics:
Spur gears
,
Stress
Discussion: “Simple Stress Formulae for a Thin-Rimmed Spur Gear. Parts 1, 2, and 3” (Chong, T. H., and Kubo, A., 1985, ASME J. Mech. Transm. Autom. Des., 107, 406–422)
J. Mech., Trans., and Automation. September 1985, 107(3): 422–423.
doi: https://doi.org/10.1115/1.3260737
Topics:
Spur gears
,
Stress
Closure to “Discussions of ‘Simple Stress Formulae for a Thin-Rimmed Spur Gear. Parts 1, 2, and 3’” (1985, ASME J. Mech. Transm. Autom. Des., 107, pp. 422–423)
J. Mech., Trans., and Automation. September 1985, 107(3): 423.
doi: https://doi.org/10.1115/1.3260738
Topics:
Spur gears
,
Stress
Discussion: “The Generalized Oldham Coupling” (Freudenstein, F., Tsai, L. W., and Madi, E. R., 1984, ASME J. Mech. Transm. Autom. Des., 106, pp. 475–482)
J. Mech., Trans., and Automation. September 1985, 107(3): 443.
doi: https://doi.org/10.1115/1.3260742
Closure to “Discussion of ‘The Generalized Oldham Coupling’” (1985, ASME J. Mech. Transm. Autom. Des., 107, p. 443)
J. Mech., Trans., and Automation. September 1985, 107(3): 443–444.
doi: https://doi.org/10.1115/1.3260743
Email alerts
RSS Feeds
Nonlinear Design of a General Single-Translation Constraint and the Resulting General Spherical Joint
J. Mech. Des (October 2025)
