Skip Nav Destination
Issues
September 1983
This article was originally published in
Journal of Mechanisms, Transmissions, and Automation in Design
ISSN 0738-0666
Editorial
Editorial
J. Mech., Trans., and Automation. September 1983, 105(3): 279.
doi: https://doi.org/10.1115/1.3267355
Book Reviews
Epicyclic Gear Trains: Analysis, Synthesis and Applications
J. Mech., Trans., and Automation. September 1983, 105(3): 280.
doi: https://doi.org/10.1115/1.3267356
Topics:
Planetary gears
,
Trains
Commentary
1983 State-of-the-Art Review on Gears
J. Mech., Trans., and Automation. September 1983, 105(3): 283–285.
doi: https://doi.org/10.1115/1.3267357
Topics:
Gears
,
NASA
,
Bending (Stress)
,
Cooling
,
Gear teeth
,
Leadership
,
Navy
,
Noise (Sound)
Research Papers
Gearing and Power Transmission Papers
χ-Theory in Gear Geometry
J. Mech., Trans., and Automation. September 1983, 105(3): 286–290.
doi: https://doi.org/10.1115/1.3267358
Topics:
Gears
,
Geometry
,
Design
,
Differential equations
,
Flow (Dynamics)
,
Helical gears
,
Optimization
,
Rotors
Reliability Model for Planetary Gear Trains
J. Mech., Trans., and Automation. September 1983, 105(3): 291–297.
doi: https://doi.org/10.1115/1.3267359
Topics:
Planetary gears
,
Reliability
,
Trains
,
Stress
,
Sun gears
,
Gear trains
,
Gears
,
Helicopters
,
Rotors
,
Thrust
Gear-Tooth Interference
J. Mech., Trans., and Automation. September 1983, 105(3): 298–301.
doi: https://doi.org/10.1115/1.3267360
Topics:
Gear teeth
,
Gears
On the Spur-Gear Dynamic Tooth-Load Under Consideration of System Elasticity and Tooth Involute Profile
J. Mech., Trans., and Automation. September 1983, 105(3): 302–309.
doi: https://doi.org/10.1115/1.3267361
Topics:
Elasticity
,
Spur gears
,
Stress
,
Cylinders
,
Cantilever beams
,
Dynamic analysis
,
Equations of motion
,
Gears
,
Shapes
Precision of Spiral-Bevel Gears
J. Mech., Trans., and Automation. September 1983, 105(3): 310–316.
doi: https://doi.org/10.1115/1.3267362
Topics:
Gears
,
Errors
,
Geometry
,
Kinematics
,
Manufacturing
,
Bearings
,
Gear teeth
,
Gear trains
,
Machinery
Kinematic Precision of Gear Trains
J. Mech., Trans., and Automation. September 1983, 105(3): 317–326.
doi: https://doi.org/10.1115/1.3267363
Topics:
Gear trains
,
Kinematics
,
Gears
,
Errors
,
Manufacturing
,
Gear teeth
,
Noise (Sound)
A Finite Element Stress Analysis of Spur Gears Including Fillet Radii and Rim Thickness Effects
J. Mech., Trans., and Automation. September 1983, 105(3): 327–330.
doi: https://doi.org/10.1115/1.3267364
Topics:
Finite element analysis
,
Spur gears
,
Stress analysis (Engineering)
,
Stress
,
Fittings
Experimental Determination of the Roller Chain Load Distribution
J. Mech., Trans., and Automation. September 1983, 105(3): 331–338.
doi: https://doi.org/10.1115/1.3267365
Topics:
Roller chain
,
Stress
,
Chain
,
Elasticity
,
Lubrication
,
Friction
,
Tension
Toothed Belt-Load Distribution
J. Mech., Trans., and Automation. September 1983, 105(3): 339–347.
doi: https://doi.org/10.1115/1.3267366
Topics:
Belts
,
Stress
,
Friction
,
Pulleys
,
Tension
,
Elastic constants
,
Materials properties
,
Rotation
Surface Durability of Forged and Machined Steel Gears
J. Mech., Trans., and Automation. September 1983, 105(3): 348–354.
doi: https://doi.org/10.1115/1.3267367
Topics:
Durability
,
Gears
,
Steel
,
Bevel gears
,
Cycles
,
Damage
,
Fatigue
,
Generators
,
Heat treating (Metalworking)
,
Manufacturing
Metallurgical Factors in Forged and Machined Gear Surface Durability
J. Mech., Trans., and Automation. September 1983, 105(3): 355–361.
doi: https://doi.org/10.1115/1.3267368
Topics:
Durability
,
Gears
,
Bevel gears
,
Fatigue
,
Grain size
,
Heat treating (Metalworking)
,
Manufacturing
Design Automation Papers
Automated Dynamic Analysis of Chain-Driven Mechanical Systems
J. Mech., Trans., and Automation. September 1983, 105(3): 362–370.
doi: https://doi.org/10.1115/1.3267369
Topics:
Chain
,
Dynamic analysis
,
Displacement
,
Kinematics
,
Dynamics (Mechanics)
,
Stress
,
Algorithms
,
Computer-aided engineering
,
Design
,
Equations of motion
Variable Degree-of-Freedom Component Mode Analysis of Inertia Variant Flexible Mechanical Systems
J. Mech., Trans., and Automation. September 1983, 105(3): 371–378.
doi: https://doi.org/10.1115/1.3267370
Generalized Coordinate Partitioning for Analysis of Mechanical Systems with Nonholonomic Constraints
J. Mech., Trans., and Automation. September 1983, 105(3): 379–384.
doi: https://doi.org/10.1115/1.3267371
Topics:
Algorithms
,
Computers
,
Differential equations
,
Dynamic analysis
,
Errors
,
Jacobian matrices
,
System dynamics
A Two-Dimensional Isoparametric Galerkin Finite Element for Acoustic-Flow Problems
J. Mech., Trans., and Automation. September 1983, 105(3): 385–391.
doi: https://doi.org/10.1115/1.3267372
Topics:
Acoustics
,
Finite element analysis
,
Flow (Dynamics)
,
Ducts
,
Computers
,
Geometry
,
Storage
Contact Pattern and Transmission Quality Analysis of Point Contact Conjugation With One Degree-of-Freedom
J. Mech., Trans., and Automation. September 1983, 105(3): 392–399.
doi: https://doi.org/10.1115/1.3267373
Topics:
Degrees of freedom
,
Computation
,
Design engineering
,
Kinematics
Stress Analysis of Mechanical Sheaves and Pulleys
J. Mech., Trans., and Automation. September 1983, 105(3): 400–406.
doi: https://doi.org/10.1115/1.3267374
Topics:
Pulleys
,
Stress analysis (Engineering)
,
Bricks
,
Design
,
Finite element analysis
,
Geometry
,
Mechanical drives
,
Shapes
An Analytical Method for Computing the Instant Centers, Centrodes, Inflection Circles, and Centers of Curvature of the Centrodes by Successively Grounding Each Link
J. Mech., Trans., and Automation. September 1983, 105(3): 407–414.
doi: https://doi.org/10.1115/1.3267375
Topics:
Computer software
,
Kinematics
Optimal Allocation of Antenna Structural Tolerances Based on Reliability
J. Mech., Trans., and Automation. September 1983, 105(3): 415–424.
doi: https://doi.org/10.1115/1.3267376
Topics:
Reliability
,
Astronomy
,
Errors
,
Manufacturing
,
Materials properties
,
Nonlinear programming
,
Stress
Optimal Flywheel Design With a General Thickness Form Representation
J. Mech., Trans., and Automation. September 1983, 105(3): 425–433.
doi: https://doi.org/10.1115/1.3267377
Topics:
Design
,
Flywheels
,
Stress
,
Kinetic energy
,
Boundary-value problems
,
Differential equations
,
Nonlinear programming
,
Shear stress
A Compact Approach To Planar Kinematic Analysis
J. Mech., Trans., and Automation. September 1983, 105(3): 434–440.
doi: https://doi.org/10.1115/1.3267378
Topics:
Computer-aided design
,
Computers
,
Design engineering
,
Kinematic analysis
,
Kinematic chains
,
Storage
Mechanism Papers
Kinematic Design and Analysis of Coupled Planetary Bevel-Gear Trains
J. Mech., Trans., and Automation. September 1983, 105(3): 441–444.
doi: https://doi.org/10.1115/1.3267379
Topics:
Bevel gears
,
Design
,
Kinematics
,
Trains
,
Gear trains
,
Gears
,
Planetary gears
,
Rotation
,
Algorithms
,
Computers
A Theory for the Identification of a Single Degree-of-Freedom Machine From its Periodic Operating Characteristics
J. Mech., Trans., and Automation. September 1983, 105(3): 445–451.
doi: https://doi.org/10.1115/1.3267380
Topics:
Degrees of freedom
,
Machinery
,
Dynamic analysis
,
Energy dissipation
,
Kinetic energy
,
Potential energy
Effect of Internal Material Damping on the Dynamics of a Slider-Crank Mechanism
J. Mech., Trans., and Automation. September 1983, 105(3): 452–459.
doi: https://doi.org/10.1115/1.3267381
Motion Synthesis Using Kinematic Mappings
J. Mech., Trans., and Automation. September 1983, 105(3): 460–467.
doi: https://doi.org/10.1115/1.3267382
Topics:
Kinematics
,
Approximation
,
Algebra
,
Curve fitting
,
Displacement
,
Errors
An Improved Alternative to the Three-Dimensional, Swash Plate Mechanism
J. Mech., Trans., and Automation. September 1983, 105(3): 468–470.
doi: https://doi.org/10.1115/1.3267383
Topics:
Compressors
,
Design
,
Displacement
,
Engineering design processes
,
Kinematics
,
Pumps
,
Theoretical analysis
Minimization of Inertia-Induced Forces in Spherical Four-Bar Mechanisms. Part 1: The General Spherical Four-Bar Linkage
J. Mech., Trans., and Automation. September 1983, 105(3): 471–477.
doi: https://doi.org/10.1115/1.3267384
Topics:
Inertia (Mechanics)
,
Linkages
,
Bearings
,
Computer-aided design
,
Quadratic programming
,
Torque
,
Tradeoffs
Minimization of Inertia-Induced Forces in Spherical Four-Bar Mechanisms. Part 2: Wobble-Plate Engines
J. Mech., Trans., and Automation. September 1983, 105(3): 478–483.
doi: https://doi.org/10.1115/1.3267385
Topics:
Engines
,
Inertia (Mechanics)
,
Computer-aided design
The Dual Torus and Associated Linkages
J. Mech., Trans., and Automation. September 1983, 105(3): 484–491.
doi: https://doi.org/10.1115/1.3267386
Topics:
Linkages
Dynamic Force and Torque Analysis of Spherical Four Link Mechanisms
J. Mech., Trans., and Automation. September 1983, 105(3): 492–497.
doi: https://doi.org/10.1115/1.3267387
Topics:
Design
,
Dynamic analysis
,
Inertia (Mechanics)
,
Torque
Dynamics of Planar, Elastic, High-Speed Mechanisms Considering Three-Dimensional Offset Geometry: Analytical and Experimental Investigations
J. Mech., Trans., and Automation. September 1983, 105(3): 498–510.
doi: https://doi.org/10.1115/1.3267388
Topics:
Dynamics (Mechanics)
,
Geometry
,
Stress
,
Computer software
,
Cycles
,
Shock (Mechanics)
,
Statics
A Novel Method for Prescribing the Maximum Shaking Force of a Four-Bar Linkage with Flexibility in Counterweight Design
J. Mech., Trans., and Automation. September 1983, 105(3): 511–519.
doi: https://doi.org/10.1115/1.3267389
Simultaneous Optimization of Dynamic Reactions of a Four-Bar Linkage With Prescribed Maximum Shaking Force
J. Mech., Trans., and Automation. September 1983, 105(3): 520–525.
doi: https://doi.org/10.1115/1.3267390
Topics:
Linkages
,
Optimization
,
Bearings
,
Design
An Experimental and Analytical Study of the Dynamic Response of a Linkage Fabricated from a Unidirectional Fiber-Reinforced Composite Laminate
J. Mech., Trans., and Automation. September 1983, 105(3): 526–533.
doi: https://doi.org/10.1115/1.3267391
On The Dynamics of Intermittent-Motion Mechanisms. Part 1: Dynamic Model and Response
J. Mech., Trans., and Automation. September 1983, 105(3): 534–540.
doi: https://doi.org/10.1115/1.3267392
Topics:
Dynamic models
,
Dynamics (Mechanics)
,
Damping
,
Boundary-value problems
,
Clearances (Engineering)
,
Displacement
,
Elasticity
,
Modeling
,
Stress
On the Dynamics of Intermittent-Motion Mechanisms. Part 2: Geneva Mechanisms, Ratchets, and Escapements
J. Mech., Trans., and Automation. September 1983, 105(3): 541–551.
doi: https://doi.org/10.1115/1.3267393
Topics:
Computers
,
Dynamic response
,
Dynamics (Mechanics)
Instantaneous Kinematics of a Plane in Space Motion
J. Mech., Trans., and Automation. September 1983, 105(3): 552–559.
doi: https://doi.org/10.1115/1.3267394
Topics:
Generators
,
Kinematics
Instantaneous Kinematics of a Plane in Spherical Motion
J. Mech., Trans., and Automation. September 1983, 105(3): 560–567.
doi: https://doi.org/10.1115/1.3267395
Topics:
Dimensionless numbers
,
Kinematics
Planar and Spatial Rigid Motion as Special Cases of Spherical and 3-Spherical Motion
J. Mech., Trans., and Automation. September 1983, 105(3): 569–575.
doi: https://doi.org/10.1115/1.3267398
Topics:
Shrinkage (Materials)
Application of Optimal Control Theory to the Synthesis of High-Speed Cam-Follower Systems. Part 1: Optimality Criterion
J. Mech., Trans., and Automation. September 1983, 105(3): 576–584.
doi: https://doi.org/10.1115/1.3267399
Topics:
Optimal control
,
Tradeoffs
,
Dynamic response
,
Optimization
,
Design
Application of Optimal Control Theory to the Synthesis of High-Speed Cam-Follower Systems. Part 2: System Optimization
J. Mech., Trans., and Automation. September 1983, 105(3): 585–591.
doi: https://doi.org/10.1115/1.3267400
Topics:
Optimal control
,
Optimization
,
Cams
,
Design
,
Friction
,
Pressure
,
Stress
Prevention of Impact in Bearings of Four-Bar Linkages
J. Mech., Trans., and Automation. September 1983, 105(3): 592–598.
doi: https://doi.org/10.1115/1.3267401
A Bivariate Normal Model of Mechanism Coupler-Point Position
J. Mech., Trans., and Automation. September 1983, 105(3): 599–605.
doi: https://doi.org/10.1115/1.3267402
Topics:
Dimensions
,
Linkages
,
Probability
Discussions
Discussion: Instantaneous Kinematics of a Plane in Spherical Motion (Ting, K.-L., and Soni, A. H., 1983, ASME J. Mech. Transm. Autom. Des., 105, pp. 560–567)
J. Mech., Trans., and Automation. September 1983, 105(3): 567–568.
doi: https://doi.org/10.1115/1.3267396
Topics:
Kinematics
Closure to “Discussion of ‘Instantaneous Kinematics of a Plane in Spherical Motion’” (1983, ASME J. Mech. Transm. Autom. Des., 105, pp. 567–568)
J. Mech., Trans., and Automation. September 1983, 105(3): 568.
doi: https://doi.org/10.1115/1.3267397
Topics:
Kinematics
Email alerts
RSS Feeds
A Visual Representation of Engineering Catalogs Using Variational Autoencoders
J. Mech. Des (April 2025)