Skip Nav Destination
Issues
April 2011
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Research Papers
Use of a Continuum Damage Model Based on Energy Equivalence to Predict the Response of a Single-Crystal Superalloy
J. Eng. Mater. Technol. April 2011, 133(2): 021001.
doi: https://doi.org/10.1115/1.4000666
Topics:
Crystals
,
Damage
,
Hardening
,
Superalloys
,
Viscoplasticity
,
Stress
,
Plates (structures)
,
Deformation
,
Geometry
,
Constitutive equations
Influence of Dissipated Energy on Shear Band Spacing in HY-100 Steel
J. Eng. Mater. Technol. April 2011, 133(2): 021002.
doi: https://doi.org/10.1115/1.4001592
Topics:
Shear (Mechanics)
,
Steel
,
Work hardening
Finite Element Analysis of Welding Processes by Way of Hypoelasticity-Based Formulation
J. Eng. Mater. Technol. April 2011, 133(2): 021003.
doi: https://doi.org/10.1115/1.4003099
Topics:
Phase transitions
,
Plasticity
,
Stress
,
Welding
,
Temperature
,
Finite element analysis
,
Cooling
,
Deformation
Study on Machinabilty of Ceramic Composite in EDM Using Response Surface Methodology
J. Eng. Mater. Technol. April 2011, 133(2): 021004.
doi: https://doi.org/10.1115/1.4003100
Effect of Cyclic Strain on the Mechanical Behavior of a Thermoplastic Polyurethane
J. Eng. Mater. Technol. April 2011, 133(2): 021005.
doi: https://doi.org/10.1115/1.4003101
Topics:
Stress
,
Temperature
,
Urethane elastomers
,
Thermal analysis
,
Polymers
Microstructure and Properties of the Composites: Hydroxyapatite With Addition of Zirconia Phase
J. Eng. Mater. Technol. April 2011, 133(2): 021006.
doi: https://doi.org/10.1115/1.4003104
Topics:
Composite materials
,
Porosity
,
Sinter (Metallurgy)
,
Ceramics
,
Sintering
,
Bone
Study of Machining-Induced Microstructure Variations of Nanostructured/Ultrafine-Grained Copper Using XRD
J. Eng. Mater. Technol. April 2011, 133(2): 021007.
doi: https://doi.org/10.1115/1.4003105
Topics:
Copper
,
Dislocation density
,
Grain size
,
Machining
,
Dislocations
Modeling of Strain-Stress Relationship for Carbon Steel Deformed at Temperature Exceeding Hot Rolling Range
J. Eng. Mater. Technol. April 2011, 133(2): 021008.
doi: https://doi.org/10.1115/1.4003106
Topics:
Deformation
,
Hot rolling
,
Steel
,
Stress
,
Temperature
,
Testing
,
Modeling
,
Compression
,
Yield stress
,
Carbon steel
Processing of Small Scale Nitinol Billets by Induction Heated Nonconventional Isothermal Extrusion (IHNCIE)
J. Eng. Mater. Technol. April 2011, 133(2): 021009.
doi: https://doi.org/10.1115/1.4003108
Topics:
Extruding
,
Nickel titanium alloys
,
Wire
,
Temperature
,
Electromagnetic induction
Uniaxial Strain and Stress-Controlled Cyclic Responses of Ultrahigh Molecular Weight Polyethylene: Experiments and Model Simulations
J. Eng. Mater. Technol. April 2011, 133(2): 021010.
doi: https://doi.org/10.1115/1.4003109
Topics:
Simulation
,
Stress
,
Molecular weight
,
Viscoplasticity
,
Cycles
,
Polymers
The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments
J. Eng. Mater. Technol. April 2011, 133(2): 021011.
doi: https://doi.org/10.1115/1.4003112
Topics:
Creep
,
Failure
,
Metals
,
Welded joints
,
Testing
,
Stress
,
Steel
,
Heat
,
Fracture (Process)
Ambient Temperature Creep of Type 304 Stainless Steel
J. Eng. Mater. Technol. April 2011, 133(2): 021012.
doi: https://doi.org/10.1115/1.4003110
Topics:
Creep
,
Stainless steel
,
Temperature
,
Yield stress
,
Plasticity
,
Work hardening
,
Stress
Characterization of the Creep Deformation and Rupture Behavior of DS GTD-111 Using the Kachanov–Rabotnov Constitutive Model
J. Eng. Mater. Technol. April 2011, 133(2): 021013.
doi: https://doi.org/10.1115/1.4003111
Topics:
Creep
,
Damage
,
Rupture
,
Temperature
,
Stress
,
Optimization
Effect of Material Physical Properties on Residual Stress Measurement by EDM Hole-Drilling Method
J. Eng. Mater. Technol. April 2011, 133(2): 021014.
doi: https://doi.org/10.1115/1.4000219
Topics:
Calibration
,
Drilling
,
Electrical discharge machining
,
Machining
,
Strain gages
,
Stress
,
Thermal conductivity
,
Carbon
Tensile and Fracture Characterization of PETI-5 and IM7/PETI-5 Graphite/Epoxy Composites Under Quasi-Static and Dynamic Loading Conditions
J. Eng. Mater. Technol. April 2011, 133(2): 021015.
doi: https://doi.org/10.1115/1.4003487
Topics:
Composite materials
,
Fracture (Materials)
,
Fracture (Process)
,
Stress
,
Graphite
,
Epoxy resins
Fatigue Behavior and Damage Assessment of Stainless Steel/Aluminum Composites
J. Eng. Mater. Technol. April 2011, 133(2): 021016.
doi: https://doi.org/10.1115/1.4003490
Topics:
Aluminum
,
Composite materials
,
Diffusion bonding (Metals)
,
Fatigue
,
Fatigue cracks
,
Fatigue testing
,
Fibers
,
Fracture (Materials)
,
Stainless steel
,
Stress
Model for the Effect of Fiber Bridging on the Fracture Resistance of Reinforced-Carbon-Carbon
J. Eng. Mater. Technol. April 2011, 133(2): 021017.
doi: https://doi.org/10.1115/1.4003344
Topics:
Fibers
,
Fracture (Materials)
,
Stress
,
Fracture toughness
,
Displacement
,
Fracture (Process)
Improvement of the Fatigue Behavior of Stainless Steel Substrates by Low Pressure Fluidized Bed Peening (FBP)
J. Eng. Mater. Technol. April 2011, 133(2): 021018.
doi: https://doi.org/10.1115/1.4003486
Topics:
Fatigue
,
Fatigue life
,
Fluidized beds
,
Shot peening
,
Stainless steel
,
Stress
,
Pressure
Mechanical Behavior of a Rephosphorized Steel for Car Body Applications: Effects of Temperature, Strain Rate, and Pretreatment
J. Eng. Mater. Technol. April 2011, 133(2): 021019.
doi: https://doi.org/10.1115/1.4003491
Topics:
Deformation
,
Steel
,
Stress
,
Temperature
,
Elongation
,
Mechanical behavior
,
Work hardening
,
Flow (Dynamics)
,
Temperature effects
Hole-Within-a-Hole Method for Determining Residual Stresses
J. Eng. Mater. Technol. April 2011, 133(2): 021020.
doi: https://doi.org/10.1115/1.4003496
Topics:
Drilling
,
Stress
,
Residual stresses
,
Finite element analysis
A Simple Transversely Isotropic Hyperelastic Constitutive Model Suitable for Finite Element Analysis of Fiber Reinforced Elastomers
J. Eng. Mater. Technol. April 2011, 133(2): 021021.
doi: https://doi.org/10.1115/1.4003517
Topics:
Compression
,
Deformation
,
Elastomers
,
Fibers
,
Finite element analysis
,
Shear (Mechanics)
,
Stress
,
Tension
,
Anisotropy
Fatigue Life Prediction of Different Fiber-Reinforced Composites Using Polynomial Classifiers
J. Eng. Mater. Technol. April 2011, 133(2): 021022.
doi: https://doi.org/10.1115/1.4003566
Topics:
Fatigue
,
Fatigue life
,
Polynomials
,
Fiber reinforced composites
Extrapolation Techniques for Very Low Cycle Fatigue Behavior of a Ni-base Superalloy
J. Eng. Mater. Technol. April 2011, 133(2): 021023.
doi: https://doi.org/10.1115/1.4003602
Topics:
Fatigue
,
High temperature
,
Low cycle fatigue
,
Stress
,
Superalloys
,
Temperature
,
Gas turbines
,
Tensile strength
,
Cycles
,
Alloys
Microplane Model for Fracturing Damage of Triaxially Braided Fiber-Polymer Composites
J. Eng. Mater. Technol. April 2011, 133(2): 021024.
doi: https://doi.org/10.1115/1.4003102
Topics:
Composite materials
,
Damage
,
Fracture (Materials)
,
Fracture (Process)
,
Size effect
,
Stress
,
Fibers
,
Simulation
,
Finite element analysis
,
Polymers
Time and Temperature Dependent Recovery of Epoxy-Based Shape Memory Polymers
J. Eng. Mater. Technol. April 2011, 133(2): 021025.
doi: https://doi.org/10.1115/1.4003103
Topics:
Cycles
,
Epoxy adhesives
,
Epoxy resins
,
Shape memory polymers
,
Temperature
,
Heating
,
Deformation
High Strain Rate Tensile Behavior of Aluminum Alloy 7075 T651 and IS 2062 Mild Steel
J. Eng. Mater. Technol. April 2011, 133(2): 021026.
doi: https://doi.org/10.1115/1.4003113
Topics:
Aluminum alloys
,
Steel
,
Yield strength
,
Stress
,
Uncertainty analysis
Technical Briefs
Characterization of Rapidly Consolidated Titanium Diboride
J. Eng. Mater. Technol. April 2011, 133(2): 024501.
doi: https://doi.org/10.1115/1.4003599
Email alerts
RSS Feeds
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)