Volume 129 Issue 2 | J. Eng. Mater. Technol.

Skip Nav Destination

2006 NADAI Award Paper

A Comprehensive Theory of Yielding and Failure for Isotropic Materials

Richard M. Christensen

J. Eng. Mater. Technol. April 2007, 129(2): 173–181. doi: https://doi.org/10.1115/1.2712847

Abstract

View articletitled, A Comprehensive Theory of Yielding and Failure for Isotropic Materials

Open the PDF for in another window

Topics: Brittleness , Failure , Stress , Deformation

Technical Papers

An Approach for Fatigue Life Prediction

Yanyao Jiang, Fei Ding, Miaolin Feng

J. Eng. Mater. Technol. April 2007, 129(2): 182–189. doi: https://doi.org/10.1115/1.2400260

Abstract

View articletitled, An Approach for Fatigue Life Prediction

Open the PDF for in another window

Topics: Fatigue , Fatigue damage , Fatigue life , Fracture (Materials) , Stress , Stress analysis (Engineering) , Cycles

Fracture Characterization of Woven Fabric Reinforced Thermoplastic Composites

R. Zenasni, A. S. Bachir, A. Argüelles, M. A. Castrillo, J. Viña

J. Eng. Mater. Technol. April 2007, 129(2): 190–193. doi: https://doi.org/10.1115/1.2400277

Abstract

View articletitled, Fracture Characterization of Woven Fabric Reinforced Thermoplastic Composites

Open the PDF for in another window

Topics: Delamination , Fracture (Materials) , Glass fibers , Textiles , Thermoplastic composites , Carbon fibers , Twill , Scanning electron microscopy

Microwave Synthesis and Characterization of Magnesium Based Composites Containing Nanosized SiC and Hybrid $(Si C + {Al}_{2} O_{3})$ Reinforcements

Sanjay Kumar Thakur, K. Balasubramanian, Manoj Gupta

J. Eng. Mater. Technol. April 2007, 129(2): 194–199. doi: https://doi.org/10.1115/1.2400279

Abstract

View articletitled, Microwave Synthesis and Characterization of Magnesium Based Composites Containing Nanosized SiC and Hybrid <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mo>(</mo><mi mathvariant="normal">Si</mi><mi mathvariant="normal">C</mi><mo>+</mo><msub><mi mathvariant="normal">Al</mi><mn>2</mn></msub><msub><mi mathvariant="normal">O</mi><mn>3</mn></msub><mo>)</mo></mrow></math></span> Reinforcements

Open the PDF for in another window

Topics: Composite materials , Magnesium (Metal) , Microwaves , Thermal expansion , Particulate matter , Porosity , Extruding , Sintering , Powder metallurgy , Ductility

Determining Equi-Biaxial Residual Stress and Mechanical Properties From the Force-Displacement Curves of Conical Microindentation

J. Yan, X. Chen, A. M. Karlsson

J. Eng. Mater. Technol. April 2007, 129(2): 200–206. doi: https://doi.org/10.1115/1.2400280

Abstract

View articletitled, Determining Equi-Biaxial Residual Stress and Mechanical Properties From the Force-Displacement Curves of Conical Microindentation

Open the PDF for in another window

Topics: Finite element analysis , Stress , Yield strength , Mechanical properties , Displacement , Errors , Stiffness , Elastic moduli

Optimization of Thermomechanical Loading by the Inverse Method

Virginie Bogard, Philippe Revel, Yannick Hetet

J. Eng. Mater. Technol. April 2007, 129(2): 207–210. doi: https://doi.org/10.1115/1.2400255

Abstract

View articletitled, Optimization of Thermomechanical Loading by the Inverse Method

Open the PDF for in another window

Topics: Casting , Coating processes , Coatings , Cooling , Finite element analysis , Finite element methods , Optimization , Pyrometers , Quenching (Metalworking) , Rollers

Average Strain in Fiber Bundles and Its Effect on NCF Composite Stiffness

H. David Mattsson, Janis Varna

J. Eng. Mater. Technol. April 2007, 129(2): 211–219. doi: https://doi.org/10.1115/1.2400266

Abstract

View articletitled, Average Strain in Fiber Bundles and Its Effect on NCF Composite Stiffness

Open the PDF for in another window

Topics: Composite materials , Stiffness , Fibers

Low-Velocity Impact Response Characterization of a Hybrid Titanium Composite Laminate

S. Bernhardt, M. Ramulu, A. S. Kobayashi

J. Eng. Mater. Technol. April 2007, 129(2): 220–226. doi: https://doi.org/10.1115/1.2400272

Abstract

View articletitled, Low-Velocity Impact Response Characterization of a Hybrid Titanium Composite Laminate

Open the PDF for in another window

Topics: Buckling , Composite materials , Failure , Fracture (Materials) , Fracture (Process) , Laminates , Titanium , Failure mechanisms , Displacement , Brittleness

Residual Stress Solution Extrapolation for the Slitting Method Using Equilibrium Constraints

Gary S. Schajer, Michael B. Prime

J. Eng. Mater. Technol. April 2007, 129(2): 227–232. doi: https://doi.org/10.1115/1.2400281

Abstract

View articletitled, Residual Stress Solution Extrapolation for the Slitting Method Using Equilibrium Constraints

Open the PDF for in another window

Topics: Equilibrium (Physics) , Stress , Residual stresses

Optimization of Material Properties and Process Parameters for Tube Hydroforming of Aluminum Extrusions

Adam R. Loukus, Ghatu Subhash, Mehdi Imaninejad

J. Eng. Mater. Technol. April 2007, 129(2): 233–241. doi: https://doi.org/10.1115/1.2400259

Abstract

View articletitled, Optimization of Material Properties and Process Parameters for Tube Hydroforming of Aluminum Extrusions

Open the PDF for in another window

Topics: Ductility , Heat treating (Metalworking) , Optimization , Stress , Hardening , Aluminum alloys , Materials properties , Pressure , Heat , Aluminum extrusions

Capability of a Feed-Forward Artificial Neural Network to Predict the Constitutive Flow Behavior of As Cast 304 Stainless Steel Under Hot Deformation

Sumantra Mandal, P. V. Sivaprasad, S. Venugopal

J. Eng. Mater. Technol. April 2007, 129(2): 242–247. doi: https://doi.org/10.1115/1.2400276

Abstract

View articletitled, Capability of a Feed-Forward Artificial Neural Network to Predict the Constitutive Flow Behavior of As Cast 304 Stainless Steel Under Hot Deformation

Open the PDF for in another window

Topics: Algorithms , Artificial neural networks , Deformation , Feedforward control , Flow (Dynamics) , Stainless steel , Stress , Temperature

Behavior of Nonhomogeneous Materials Subjected to Bearing Load

Varun Batra, Carl-Ernst Rousseau

J. Eng. Mater. Technol. April 2007, 129(2): 248–254. doi: https://doi.org/10.1115/1.2400278

Abstract

View articletitled, Behavior of Nonhomogeneous Materials Subjected to Bearing Load

Open the PDF for in another window

Topics: Stress , Finite element analysis

Pressure Sensitive Nonassociative Plasticity Model for DRA Composites

Xin Lei, Cliff J. Lissenden

J. Eng. Mater. Technol. April 2007, 129(2): 255–264. doi: https://doi.org/10.1115/1.2400273

Abstract

View articletitled, Pressure Sensitive Nonassociative Plasticity Model for DRA Composites

Open the PDF for in another window

Topics: Algorithms , Composite materials , Flow (Dynamics) , Hardening , Plasticity , Pressure , Stiffness , Stress , Tensors , Compression

Weld Distortion Control During Welding Process With Reverse-Side Heating

Masahito Mochizuki, Masao Toyoda

J. Eng. Mater. Technol. April 2007, 129(2): 265–270. doi: https://doi.org/10.1115/1.2400275

Abstract

View articletitled, Weld Distortion Control During Welding Process With Reverse-Side Heating

Open the PDF for in another window

Topics: Heating , Welding , Heat , Gas metal arc welding , Welded joints , Finite element analysis

Development and Validation of Novel FE Models for 3D Analysis of Peening of Strain-Rate Sensitive Materials

S. A. Meguid, G. Shagal, J. C. Stranart

J. Eng. Mater. Technol. April 2007, 129(2): 271–283. doi: https://doi.org/10.1115/1.2712469

Abstract

View articletitled, Development and Validation of Novel FE Models for 3D Analysis of Peening of Strain-Rate Sensitive Materials

Open the PDF for in another window

Topics: Finite element analysis , Finite element model , Residual stresses , Shot peening , Stress , Drilling , Modeling

A New Method Developed for Brittle and Ductile Materials to Evaluate Mechanical Properties of a Lump Specimen in the Use of Indentation Test

Pal Jen Wei, Jen Fin Lin

J. Eng. Mater. Technol. April 2007, 129(2): 284–292. doi: https://doi.org/10.1115/1.2712465

Abstract

View articletitled, A New Method Developed for Brittle and Ductile Materials to Evaluate Mechanical Properties of a Lump Specimen in the Use of Indentation Test

Open the PDF for in another window

Topics: Brittleness , Deformation , Mechanical properties , Stress , Yield strength , Young's modulus

A Mathematical Model for Competing Failure Modes in Strain Cycle Fatigue

Gerald T. Cashman

J. Eng. Mater. Technol. April 2007, 129(2): 293–303. doi: https://doi.org/10.1115/1.2712468

Abstract

View articletitled, A Mathematical Model for Competing Failure Modes in Strain Cycle Fatigue

Open the PDF for in another window

Topics: Failure , Fatigue , Stress

Effects of Platelet Size and Mean Volume Fraction on Platelet Orientation and Volume Fraction Distributions in Functionally Graded Material Fabricated by a Centrifugal Solid-Particle Method

P. D. Sequeira, Yoshimi Watanabe, Hiroyuki Eryu, Tetsuya Yamamoto, Kiyotaka Matsuura

J. Eng. Mater. Technol. April 2007, 129(2): 304–312. doi: https://doi.org/10.1115/1.2712467

Abstract

View articletitled, Effects of Platelet Size and Mean Volume Fraction on Platelet Orientation and Volume Fraction Distributions in Functionally Graded Material Fabricated by a Centrifugal Solid-Particle Method

Open the PDF for in another window

Topics: Functionally graded materials , Particulate matter , Platelets

Four Phase Model: A New Formulation to Predict the Effective Elastic Moduli of Composites

El H. Barhdadi, P. Lipinski, M. Cherkaoui

J. Eng. Mater. Technol. April 2007, 129(2): 313–320. doi: https://doi.org/10.1115/1.2712472

Abstract

View articletitled, Four Phase Model: A New Formulation to Predict the Effective Elastic Moduli of Composites

Open the PDF for in another window

Topics: Composite materials , Elastic moduli , Tensors , Elasticity

Evidence of Ductile Tearing Ahead of the Cutting Tool and Modeling the Energy Consumed in Material Separation in Micro-Cutting

Sathyan Subbiah, Shreyes N. Melkote

J. Eng. Mater. Technol. April 2007, 129(2): 321–331. doi: https://doi.org/10.1115/1.2712471

Abstract

View articletitled, Evidence of Ductile Tearing Ahead of the Cutting Tool and Modeling the Energy Consumed in Material Separation in Micro-Cutting

Open the PDF for in another window

Topics: Cutting , Cutting tools , Ductile fracture , Separation (Technology) , Stress , Damage , Copper , Fracture (Materials) , Computer simulation , Finite element model

On Serrated Plastic Flow in an AA5052-H32 Sheet

Wei Tong, Nian Zhang

J. Eng. Mater. Technol. April 2007, 129(2): 332–341. doi: https://doi.org/10.1115/1.2712466

Abstract

View articletitled, On Serrated Plastic Flow in an AA5052-H32 Sheet

Open the PDF for in another window

Topics: Deformation , Polishing , Stress , Nucleation (Physics) , Flow (Dynamics) , Machinery , Relaxation (Physics)

Technical Brief

Manufacturing Aspects Relating to the Effects of Direct Current on the Tensile Properties of Metals

Carl D. Ross, David B. Irvin, John T. Roth

J. Eng. Mater. Technol. April 2007, 129(2): 342–347. doi: https://doi.org/10.1115/1.2712470

Abstract

View articletitled, Manufacturing Aspects Relating to the Effects of Direct Current on the Tensile Properties of Metals

Open the PDF for in another window

Topics: Aluminum , Brass (Metal) , Elastic moduli , Metals , Stress , Deformation , Manufacturing , Tensile strength , Temperature , Flow (Dynamics)

2006 NADAI Award Paper

A Comprehensive Theory of Yielding and Failure for Isotropic Materials

Technical Papers

An Approach for Fatigue Life Prediction

Fracture Characterization of Woven Fabric Reinforced Thermoplastic Composites

Microwave Synthesis and Characterization of Magnesium Based Composites Containing Nanosized SiC and Hybrid $(Si C + {Al}_{2} O_{3})$ Reinforcements

Determining Equi-Biaxial Residual Stress and Mechanical Properties From the Force-Displacement Curves of Conical Microindentation

Optimization of Thermomechanical Loading by the Inverse Method

Average Strain in Fiber Bundles and Its Effect on NCF Composite Stiffness

Low-Velocity Impact Response Characterization of a Hybrid Titanium Composite Laminate

Residual Stress Solution Extrapolation for the Slitting Method Using Equilibrium Constraints

Optimization of Material Properties and Process Parameters for Tube Hydroforming of Aluminum Extrusions

Capability of a Feed-Forward Artificial Neural Network to Predict the Constitutive Flow Behavior of As Cast 304 Stainless Steel Under Hot Deformation

Behavior of Nonhomogeneous Materials Subjected to Bearing Load

Pressure Sensitive Nonassociative Plasticity Model for DRA Composites

Weld Distortion Control During Welding Process With Reverse-Side Heating

Development and Validation of Novel FE Models for 3D Analysis of Peening of Strain-Rate Sensitive Materials

A New Method Developed for Brittle and Ductile Materials to Evaluate Mechanical Properties of a Lump Specimen in the Use of Indentation Test

A Mathematical Model for Competing Failure Modes in Strain Cycle Fatigue

Effects of Platelet Size and Mean Volume Fraction on Platelet Orientation and Volume Fraction Distributions in Functionally Graded Material Fabricated by a Centrifugal Solid-Particle Method

Four Phase Model: A New Formulation to Predict the Effective Elastic Moduli of Composites

Evidence of Ductile Tearing Ahead of the Cutting Tool and Modeling the Energy Consumed in Material Separation in Micro-Cutting

On Serrated Plastic Flow in an AA5052-H32 Sheet

Technical Brief

Manufacturing Aspects Relating to the Effects of Direct Current on the Tensile Properties of Metals

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

2006 NADAI Award Paper

Technical Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only