...Chin-Cheng Shih; Bruce L. Tai Knowing machine tool dynamics and cutting force is critical to machining process optimization, tool life prediction, and in-process monitoring. Identifying system dynamics and estimating dynamic cutting forces often require dedicated procedures and extensive execution...

... advanced materials and processing laser processes machining processes National Natural Science Foundation of China 10.13039/501100001809 52275412 High-entropy alloy (HEA) as an emerging multi-major element alloy material, has attracted wide attention for its excellent mechanical...

... optimization machining processes modeling and simulation process planning Thin-walled structures are widely used in the aerospace industry, and due to their weak rigidity, machining deformations (e.g., force-induced deformation [ 1 – 3 ], vibration-induced deformation [ 4 – 6 ], residual stress...

...Jonathan Theraroz; Oguzhan Tuysuz Chatter vibrations in machining degrade the surface quality, cause premature tool and machine failures, and reduce the productivity. The dynamic interference between the cutting tool and the wavy part surface damps the machining process in the presence...

...Santiago Frutos Taravillo; Eric Paroissien; Yann Landon; Sébastien Schwartz; Mathieu Fressinet; Clément Chirol Machining processes produce unwanted remainders of material on the free edges which are called burrs. In particular, the drilling process generates an entry burr and a typically larger...

... Corresponding author. Email: xjin@mech.ubc.ca 12 06 2024 18 10 2024 18 10 2024 21 11 2024 Graphical Abstract Figure cutting shear angle model chip formation machining processes Canada Research Chairs 10.13039/501100001804 2024-2029 Natural...

... and processing electrical and electrochemical machining laser processes machining processes micro- and nano-machining and processing precision and ultra-precision machining Alexander von Humboldt-Stiftung 10.13039/100005156 DEU/ 1209418 Surface-textured components on the microscale...

...@uvic.ca 1 Corresponding author. Email: kvahmadi@uvic.ca Email: tirtashi@uvic.ca 04 07 2024 26 09 2024 27 09 2024 18 11 2024 Graphical Abstract Figure control and automation machine tool dynamics machining processes modeling and simulation sensing...

... sidewall slope surface roughness laser processes machining processes micro- and nano-machining and processing nontraditional manufacturing processes precision and ultra-precision machining Fused silica is characterized by a series of special mechanical, physical, and chemical properties...

... for manufacturing machine tool dynamics machining processes modeling and simulation precision and ultra-precision machining sensing monitoring and diagnostics sensors Ball screw drives are widely used in machine tools due to their lower cost and torque reduction capabilities. As the machine is used...

... Graphical Abstract Figure biomedical manufacturing machining processes Japan Society for the Promotion of Science 10.13039/501100001691 JP22K03843 In surgical tasks involving soft tissue cutting, surgical blades such as scalpels are essential because they enable performing...

... suppress the formation of undesirable serrated chips. It is expected that the anisotropic deformation index will be applied to the control of serrated chip formation in practical machining processes. 1 Corresponding author. Email: tamuras@mail.dendai.ac.jp Email: tmatsumu@cck.dendai.ac.jp...

... composite rotary ultrasonic face grinding debonding fiber damage mechanism low debonding damage process window grinding and abrasive processes machining processes modeling and simulation nontraditional manufacturing processes National Natural Science Foundation of China 10.13039...

... is closely related to the thermo-mechanical loads applied by the cutting tool on the finished surface during the machining process [ 6 ]. Liao et al. [ 7 ] demonstrated that the distribution of residual stress on the machined surface determines the corrosion resistance and fatigue strength of the machined...

.... , 1982 , “ Residual Stresses—Measurement and Causes in Machining Processes ,” Ann. CIRP , 31 ( 2 ), pp. 491 – 510 . 10.1016/S0007-8506(07)60172-3 [2] Aurrekoetxea , M. , Norberto López de Lacalle , L. , and Llanos , I. , 2020 , “ Machining Stresses and Initial Geometry on Bulk...

.... This hypothesis is then evidenced by the statistical analysis of cross section profile error data of 28 blades. The present work can not only optimize machining processes but also relax tolerance requirements and diminish the effort of aerodynamic analysis. For the first time, this article applies...

.... 14 . The graph shows a comparable hardness profile trend of the gears after all machining processes but with a non-negligible difference in resulting values. The smaller box inside the graph highlights the measures in the first 100 μ m below the flank surface and the following mean values can...

... fracture mechanisms cutting tool design analytical modeling machining processes Natural Sciences and Engineering Research Council of Canada 10.13039/501100000038 Alliance International Catalyst Grant (ALLRP 580723 - 22) Carbon fiber reinforced polymer (CFRP) materials are commonly...

... Email: isshiki0208@keio.jp Email: koike@sd.keio.ac.jp Email: kakinuma@sd.keio.ac.jp 27 11 2023 22 04 2024 23 04 2024 21 05 2024 Graphical Abstract Figure additive manufacturing machining processes modeling and simulation process planning...

... 07 07 2023 06 02 2024 06 02 2024 24 04 2024 Graphical Abstract Figure milling dynamics process damping Bayesian learning machine learning machine tool dynamics machining processes Process damping is a phenomenon where a machining process dissipates...