Topics: Air entrainment , Bubbles , Composite materials , Compression , Cycles , Elastomers , Hardening (Curing) , Rubber , Silicone rubber , Temperature

A Three-Dimensional Transient Thermal Model for Machining

Coskun Islam, Ismail Lazoglu, Yusuf Altintas

J. Manuf. Sci. Eng. February 2016, 138(2): 021003. doi: https://doi.org/10.1115/1.4030305

Abstract

View articletitled, A Three-Dimensional Transient Thermal Model for Machining

Open the PDF for in another window

Topics: Cutting , Heat , Machining , Temperature , Transients (Dynamics) , Modeling

Laser Additive Manufacturing of Novel Aluminum Based Nanocomposite Parts: Tailored Forming of Multiple Materials

Dongdong Gu, Hongqiao Wang, Donghua Dai

J. Manuf. Sci. Eng. February 2016, 138(2): 021004. doi: https://doi.org/10.1115/1.4030376

Abstract

View articletitled, Laser Additive Manufacturing of Novel Aluminum Based Nanocomposite Parts: Tailored Forming of Multiple Materials

Open the PDF for in another window

Topics: Additive manufacturing , Lasers , Nanocomposites , Mechanical properties , Aluminum , Wear

Fatigue Life Improvement of Holed Plates Made of an Innovative Medium C Micro-Alloyed Steel by Local Plastic Deformation

Dario Croccolo, Massimiliano De Agostinis, Giorgio Olmi, Lorella Ceschini, Alessandro Morri

J. Manuf. Sci. Eng. February 2016, 138(2): 021005. doi: https://doi.org/10.1115/1.4030378

Abstract

View articletitled, Fatigue Life Improvement of Holed Plates Made of an Innovative Medium C Micro-Alloyed Steel by Local Plastic Deformation

Open the PDF for in another window

Topics: Cycles , Deformation , Fatigue , Fatigue life , Finite element analysis , Fracture (Materials) , Plates (structures) , Steel , Stress , Carbon

Experimental and Numerical Investigation of Laser Forming of Closed-Cell Aluminum Foam

Min Zhang, Chang Jun Chen, Grant Brandal, Dakai Bian, Y. Lawrence Yao

J. Manuf. Sci. Eng. February 2016, 138(2): 021006. doi: https://doi.org/10.1115/1.4030511

Abstract

View articletitled, Experimental and Numerical Investigation of Laser Forming of Closed-Cell Aluminum Foam

Open the PDF for in another window

Topics: Aluminum , Lasers , Stress

Straight Bevel Gear Generation Using the Dual Interlocking Circular Cutter Cutting Method on a Computer Numerical Control Bevel Gear-Cutting Machine

Yi-Pei Shih, Hsin-Yen Hsieh

J. Manuf. Sci. Eng. February 2016, 138(2): 021007. doi: https://doi.org/10.1115/1.4030937

Abstract

View articletitled, Straight Bevel Gear Generation Using the Dual Interlocking Circular Cutter Cutting Method on a Computer Numerical Control Bevel Gear-Cutting Machine

Open the PDF for in another window

Topics: Cutting , Gears , Machinery , Computer numerical control machine tools

The Effects of Drilling Parameters on Pore Size in Keyhole Mode Welding

P. S. Wei, T. C. Chao

J. Manuf. Sci. Eng. February 2016, 138(2): 021008. doi: https://doi.org/10.1115/1.4030531

Abstract

View articletitled, The Effects of Drilling Parameters on Pore Size in Keyhole Mode Welding

Open the PDF for in another window

Topics: Drilling , Flow (Dynamics) , Pressure , Temperature , Welding , Mach number , Shapes , Vapors , Lasers

Study on Tribological Properties of Al–Al₂O₃ Composites Prepared Through FDMAIC Route Using Reinforced Sacrificial Patterns

Sunpreet Singh, Rupinder Singh

J. Manuf. Sci. Eng. February 2016, 138(2): 021009. doi: https://doi.org/10.1115/1.4030772

Abstract

View articletitled, Study on Tribological Properties of Al–Al<sub>2</sub>O<sub>3</sub> Composites Prepared Through FDMAIC Route Using Reinforced Sacrificial Patterns

Open the PDF for in another window

Topics: Composite materials , Disks , Manufacturing , Tribology , Wear , Weight (Mass) , Particulate matter , Density

High-Definition Metrology Enabled Surface Variation Control by Cutting Load Balancing

Hai Trong Nguyen, Hui Wang, Bruce L. Tai, Jie Ren, S. Jack Hu, Albert Shih

J. Manuf. Sci. Eng. February 2016, 138(2): 021010. doi: https://doi.org/10.1115/1.4030782

Abstract

View articletitled, High-Definition Metrology Enabled Surface Variation Control by Cutting Load Balancing

Open the PDF for in another window

Topics: Cutting , Stress

Bondline Temperature Control for Joining Composites With an Embedded Heater

Brandon P. Smith, Mahdi Ashrafi, Mark E. Tuttle, Santosh Devasia

J. Manuf. Sci. Eng. February 2016, 138(2): 021011. doi: https://doi.org/10.1115/1.4031069

Abstract

View articletitled, Bondline Temperature Control for Joining Composites With an Embedded Heater

Open the PDF for in another window

Topics: Adhesives , Bonding , Composite materials , Control equipment , Temperature , Joining , Heating , Design , Heat , Errors

Technical Brief

A Novel Technique for Production of Metal Matrix Composites Reinforced With Carbon Nanotubes

Cesar Isaza, G. Sierra, J. M. Meza

J. Manuf. Sci. Eng. February 2016, 138(2): 024501. doi: https://doi.org/10.1115/1.4030377

Abstract

View articletitled, A Novel Technique for Production of Metal Matrix Composites Reinforced With Carbon Nanotubes

Open the PDF for in another window

Topics: Aluminum , Carbon nanotubes , Composite materials , Elastic moduli , Manufacturing , Metal matrix composites , Nanoindentation , Polymers , Temperature , Tensile strength

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

On-orbit Processing and Hardware Performance of Microgravity Hydrothermal Synthesis for Graphene Aerogel

J. Manuf. Sci. Eng

Special Issue on the State-of-the-Art in Japanese Manufacturing Research

J. Manuf. Sci. Eng

On the Effects of Substrate Temperature on Glass Internal Modification Using Femtosecond Laser Pulses

J. Manuf. Sci. Eng (March 2025)

A Review of Advanced Roll-to-Roll Manufacturing: System Modeling and Control

J. Manuf. Sci. Eng (April 2025)

Data and Model Synergy-Driven Rolling Bearings Remaining Useful Life Prediction Approach Based on Deep Neural Network and Wiener Process

J. Manuf. Sci. Eng (April 2025)

Research Papers

An Assessment of the Wear Characteristics of Microcutting Arrays Produced From Polycrystalline Diamond and Cubic Boron Nitride Composites

Silicone Rubber Properties During Consolidation/Curing of Advanced Composites Using Specialized Elastomeric Tooling

A Three-Dimensional Transient Thermal Model for Machining

Laser Additive Manufacturing of Novel Aluminum Based Nanocomposite Parts: Tailored Forming of Multiple Materials

Fatigue Life Improvement of Holed Plates Made of an Innovative Medium C Micro-Alloyed Steel by Local Plastic Deformation

Experimental and Numerical Investigation of Laser Forming of Closed-Cell Aluminum Foam

Straight Bevel Gear Generation Using the Dual Interlocking Circular Cutter Cutting Method on a Computer Numerical Control Bevel Gear-Cutting Machine

The Effects of Drilling Parameters on Pore Size in Keyhole Mode Welding

Study on Tribological Properties of Al–Al₂O₃ Composites Prepared Through FDMAIC Route Using Reinforced Sacrificial Patterns

High-Definition Metrology Enabled Surface Variation Control by Cutting Load Balancing

Bondline Temperature Control for Joining Composites With an Embedded Heater

Technical Brief

A Novel Technique for Production of Metal Matrix Composites Reinforced With Carbon Nanotubes

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only