Volume 121 Issue 3 | J. Manuf. Sci. Eng.

Topics: Aluminum extrusions , Finite element model , Flow (Dynamics) , Containers , Metals , Computer software , Extruding , Finite element methods , Simulation results

Inward Flow of Surface Materials at Back-Ends of Billets During Al-Extrusion, Part 2: Influence of Process Parameters

Jin Hou, Ulf Sta˚hlberg, Bo Bengtsson

J. Manuf. Sci. Eng. August 1999, 121(3): 328–335. doi: https://doi.org/10.1115/1.2832685

Abstract

View articletitled, Inward Flow of Surface Materials at Back-Ends of Billets During Al-Extrusion, Part 2: Influence of Process Parameters

Open the PDF for in another window

Topics: Aluminum extrusions , Flow (Dynamics) , Temperature , Computer software , Containers , Dynamic light scattering , Finite element methods , Finite element model , Friction

Prediction of Ductile Fracture in Cold Forging of Aluminum Alloy

Hong-Seok Kim, Yong-Taek Im, Manfred Geiger

J. Manuf. Sci. Eng. August 1999, 121(3): 336–344. doi: https://doi.org/10.1115/1.2832686

Abstract

View articletitled, Prediction of Ductile Fracture in Cold Forging of Aluminum Alloy

Open the PDF for in another window

Topics: Aluminum alloys , Ductile fracture , Forging , Damage , Fracture (Process) , Fracture (Materials) , Shapes , Alloys , Design , Failure

Analysis of Circular Braiding Process, Part 1: Theoretical Investigation of Kinematics of the Circular Braiding Process

Q. Zhang, D. Beale, R. M. Broughton

J. Manuf. Sci. Eng. August 1999, 121(3): 345–350. doi: https://doi.org/10.1115/1.2832687

Abstract

View articletitled, Analysis of Circular Braiding Process, Part 1: Theoretical Investigation of Kinematics of the Circular Braiding Process

Open the PDF for in another window

Topics: Kinematics , Braid (Textile) , Yarns , Textiles , Density , Friction , Kinematic analysis , Manufacturing

Analysis of Circular Braiding Process, Part 2: Mechanics Analysis of the Circular Braiding Process and Experiment

Q. Zhang, D. Beale, R. M. Broughton, S. Adanur

J. Manuf. Sci. Eng. August 1999, 121(3): 351–359. doi: https://doi.org/10.1115/1.2832688

Abstract

View articletitled, Analysis of Circular Braiding Process, Part 2: Mechanics Analysis of the Circular Braiding Process and Experiment

Open the PDF for in another window

Topics: Algebra , Braid (Textile) , Equilibrium (Physics) , Friction , Kinematic analysis , Machinery , Newton's method , Yarns

An Engineering Model for Laser-Induced Sintering of Polymer Powders

M. Kandis, C. W. Buckley, T. L. Bergman

J. Manuf. Sci. Eng. August 1999, 121(3): 360–365. doi: https://doi.org/10.1115/1.2832689

Abstract

View articletitled, An Engineering Model for Laser-Induced Sintering of Polymer Powders

Open the PDF for in another window

Topics: Engineering models , Lasers , Polymers , Sintering , Heat , Irradiation (Radiation exposure) , Shapes , Stereolithography

Three-Dimensional Finite Element Modelling of Forging of a Titanium Alloy Aerofoil Sectioned Blade

Z. M. Hu, J. W. Brooks, T. A. Dean

J. Manuf. Sci. Eng. August 1999, 121(3): 366–371. doi: https://doi.org/10.1115/1.2832690

Abstract

View articletitled, Three-Dimensional Finite Element Modelling of Forging of a Titanium Alloy Aerofoil Sectioned Blade

Open the PDF for in another window

Topics: Airfoils , Blades , Finite element analysis , Forging , Modeling , Titanium alloys , Compressors , Computer software , Deformation , Finite element methods

Imaging the Keyhole in PAW of Aluminum Alloys

B. Zheng, H. J. Wang, Q. L. Wang, R. Kovacevic

J. Manuf. Sci. Eng. August 1999, 121(3): 372–377. doi: https://doi.org/10.1115/1.2832691

Abstract

View articletitled, Imaging the Keyhole in PAW of Aluminum Alloys

Open the PDF for in another window

Topics: Aluminum alloys , Imaging , Plasma arc welding , Feedback , Filters , Image formation , Mirrors , Sensors

Thermomechanical Analytical 3D Thermal/Stress Estimation Sidewall Grinding Model

Ya Yun Li, Jongwon Kim, Yunquan Sun, Yanhua Yang

J. Manuf. Sci. Eng. August 1999, 121(3): 378–384. doi: https://doi.org/10.1115/1.2832692

Abstract

View articletitled, Thermomechanical Analytical 3D Thermal/Stress Estimation Sidewall Grinding Model

Open the PDF for in another window

Topics: Grinding , Thermal stresses , Thermomechanics , Temperature distribution , Creep , Aerospace industry , Residual stresses , Stress

Automated Deburring with a Filamentary Brush: Prescribed Burr Geometry

Robert J. Stango, Lienjing Chen, Vikram Cariapa

J. Manuf. Sci. Eng. August 1999, 121(3): 385–392. doi: https://doi.org/10.1115/1.2832693

Abstract

View articletitled, Automated Deburring with a Filamentary Brush: Prescribed Burr Geometry

Open the PDF for in another window

Topics: Deburring , Geometry , Dynamic models , Machining , Computers , Dynamic response , Engineering simulation , Errors , Fibers , Manufacturing cells

Energy Partition in Conventional Surface Grinding

T. Kato, H. Fujii

J. Manuf. Sci. Eng. August 1999, 121(3): 393–398. doi: https://doi.org/10.1115/1.2832694

Abstract

View articletitled, Energy Partition in Conventional Surface Grinding

Open the PDF for in another window

Topics: Grinding , Temperature , Grinding wheels , Sensors , Thin films , Vapor deposition , Wheels

Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles

E. Shamoto, Y. Altıntas

J. Manuf. Sci. Eng. August 1999, 121(3): 399–407. doi: https://doi.org/10.1115/1.2832695

Abstract

View articletitled, Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles

Open the PDF for in another window

Topics: Cutting , Shear (Mechanics) , Shear stress , Deformation , Geometry , Flow (Dynamics) , Friction , Kinematics , Materials properties , Milling

Mechanistic Force Models for Chip Control Tools

R. Zhu, S. G. Kapoor, R. E. DeVor, S. M. Athavale

J. Manuf. Sci. Eng. August 1999, 121(3): 408–416. doi: https://doi.org/10.1115/1.2832696

Abstract

View articletitled, Mechanistic Force Models for Chip Control Tools

Open the PDF for in another window

Topics: Cutting , Design , Friction , Geometry , Machining , Modeling

Scan Welding: Thermal Modeling and Control of Material Processing

G. Korizis, C. Doumanidis

J. Manuf. Sci. Eng. August 1999, 121(3): 417–424. doi: https://doi.org/10.1115/1.2832697

Abstract

View articletitled, Scan Welding: Thermal Modeling and Control of Material Processing

Open the PDF for in another window

Topics: Control modeling , Materials processing , Welding , Arc welding , Composite materials , Computer simulation , Computer technology , Feedback , Heat , Joining

Interval Model Based Robust Control of Weld Joint Penetration

Y. M. Zhang, L. Li

J. Manuf. Sci. Eng. August 1999, 121(3): 425–433. doi: https://doi.org/10.1115/1.2832698

Abstract

View articletitled, Interval Model Based Robust Control of Weld Joint Penetration

Open the PDF for in another window

Topics: Robust control , Welding , Control systems , Dynamics (Mechanics) , Uncertainty , Algorithms , Feedback , Geometry , Manufacturing , Sensors

An Experimental Investigation into the Effect of Cutting Fluid Conditions on the Boring of Aluminum Alloys

D. A. Cozzens, II, P. D. Rao, W. W. Olson, J. W. Sutherland, J. Mark Panetta

J. Manuf. Sci. Eng. August 1999, 121(3): 434–439. doi: https://doi.org/10.1115/1.2832700

Abstract

View articletitled, An Experimental Investigation into the Effect of Cutting Fluid Conditions on the Boring of Aluminum Alloys

Open the PDF for in another window

Topics: Aluminum alloys , Cutting , Fluids , Contamination , Geometry , Machining , Surface texture

Temperature Field Regulation in Thermal Cutting for Layered Manufacturing

N. Fourligkas, C. Doumanidis

J. Manuf. Sci. Eng. August 1999, 121(3): 440–447. doi: https://doi.org/10.1115/1.2832701

Abstract

View articletitled, Temperature Field Regulation in Thermal Cutting for Layered Manufacturing

Open the PDF for in another window

Topics: Cutting , Manufacturing , Temperature , Heat , Blanking (Metalworking) , Computers , Control equipment , Control modeling , Electric arcs , Feedback

Layered-Manufacturing of Fiber-Reinforced Composites

G. Zak, M. N. Sela, V. Yevko, C. B. Park, B. Benhabib

J. Manuf. Sci. Eng. August 1999, 121(3): 448–456. doi: https://doi.org/10.1115/1.2832702

Abstract

View articletitled, Layered-Manufacturing of Fiber-Reinforced Composites

Open the PDF for in another window

Topics: Fiber reinforced composites , Manufacturing , Composite materials , Engineering prototypes , Fibers , Lasers , Resins , Design , Design theory , Mechanical testing

Machine Vision Monitoring for Automated Surface Finishing

C. Bradley, S. Kurada

J. Manuf. Sci. Eng. August 1999, 121(3): 457–465. doi: https://doi.org/10.1115/1.2832703

Abstract

View articletitled, Machine Vision Monitoring for Automated Surface Finishing

Open the PDF for in another window

Topics: Machinery , Surface finishing , Algorithms , Finishing , Hardware , Cavities , Closed loop systems , Computers , Finishes , Sensors

Materials Modelling and Laser Inspection for the 3D Lay-up of Dry Fiber Composite Preforms

Z. Zhang, M. Sarhadi

J. Manuf. Sci. Eng. August 1999, 121(3): 466–473. doi: https://doi.org/10.1115/1.2832704

Abstract

View articletitled, Materials Modelling and Laser Inspection for the 3D Lay-up of Dry Fiber Composite Preforms

Open the PDF for in another window

Topics: Composite materials , Fibers , Inspection , Lasers , Modeling , Preforms , Manufacturing , Aerospace industry , Carbon fibers , Dimensional metrology

A Novel Device for Producing Three-Dimensional Objects

J. S. Young, S. R. Fox, K. S. Anseth

J. Manuf. Sci. Eng. August 1999, 121(3): 474–477. doi: https://doi.org/10.1115/1.2832705

Abstract

View articletitled, A Novel Device for Producing Three-Dimensional Objects

Open the PDF for in another window

Topics: Lasers , Light , Liquid crystals , Maintenance , Rapid prototyping , Stereolithography , Visible spectrum

Workspace Synthesis for Flexible Fixturing of Stampings

Jinkoo Lee, S. Jack Hu, Allen C. Ward

J. Manuf. Sci. Eng. August 1999, 121(3): 478–484. doi: https://doi.org/10.1115/1.2832706

Abstract

View articletitled, Workspace Synthesis for Flexible Fixturing of Stampings

Open the PDF for in another window

Topics: Fixturing , Manufacturing , Robots , Assembly lines , Automotive industry , Design , Design methodology , Metal stamping , Sheet metal

An Elastic Contact Model for the Prediction of Workpiece-Fixture Contact Forces in Clamping

B. Li, S. N. Melkote

J. Manuf. Sci. Eng. August 1999, 121(3): 485–493. doi: https://doi.org/10.1115/1.2832707

Abstract

View articletitled, An Elastic Contact Model for the Prediction of Workpiece-Fixture Contact Forces in Clamping

Open the PDF for in another window

Topics: Deformation , Design , Friction , Machining , Stress

Predict and Assure the Matchable Degree in Selective Assembly via PCI-based Tolerance

Yu Zhang, X. Daniel Fang

J. Manuf. Sci. Eng. August 1999, 121(3): 494–500. doi: https://doi.org/10.1115/1.2832708

Abstract

View articletitled, Predict and Assure the Matchable Degree in Selective Assembly via PCI-based Tolerance

Open the PDF for in another window

Topics: Manufacturing , Design , Statistical process control , Cylinders , Diesel engines

Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 3: Real-Time Estimation of Heat Sources

S. Fraser, M. H. Attia, M. O. M. Osman

J. Manuf. Sci. Eng. August 1999, 121(3): 501–508. doi: https://doi.org/10.1115/1.2832709

Abstract

View articletitled, Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 3: Real-Time Estimation of Heat Sources

Open the PDF for in another window

Topics: Heat , Machine tools , Modeling , Thermal deformation , Computation , Computer simulation , Cycles , Errors , Feedback , Finite element model

Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 4: A Multi-Variable Closed-Loop Control System

S. Fraser, M. H. Attia, M. O. M. Osman

J. Manuf. Sci. Eng. August 1999, 121(3): 509–516. doi: https://doi.org/10.1115/1.2832710

Abstract

View articletitled, Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 4: A Multi-Variable Closed-Loop Control System

Open the PDF for in another window

Topics: Control systems , Machine tools , Modeling , Thermal deformation , Computer simulation , Control equipment , Cycles , Deformation , Displacement , Errors

Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 5: Experimental Verification

S. Fraser, M. H. Attia, M. O. M. Osman

J. Manuf. Sci. Eng. August 1999, 121(3): 517–523. doi: https://doi.org/10.1115/1.2832711

Abstract

View articletitled, Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 5: Experimental Verification

Open the PDF for in another window

Topics: Machine tools , Modeling , Thermal deformation , Control systems , Computer simulation , Deformation , Errors , Feedback , Stiffness , Thermoelasticity

The Identification of Radial Runout in Milling Operations

R. J. Seethaler, I. Yellowley

J. Manuf. Sci. Eng. August 1999, 121(3): 524–531. doi: https://doi.org/10.1115/1.2832712

Abstract

View articletitled, The Identification of Radial Runout in Milling Operations

Open the PDF for in another window

Topics: Milling , Engineering simulation , Simulation , Torque

Technical Briefs

The Effect of Tool Flexibility on Back-Cutting in End Milled Surfaces

S. N. Melkote, J. W. Sutherland, C. King

J. Manuf. Sci. Eng. August 1999, 121(3): 532–537. doi: https://doi.org/10.1115/1.2832713

Abstract

View articletitled, The Effect of Tool Flexibility on Back-Cutting in End Milled Surfaces

Open the PDF for in another window

Topics: Cutting , Surface texture

An Improved Algorithm for Cross-Coupling Control of Multi-Axis Machine Tools

Chih-Ching Lo

J. Manuf. Sci. Eng. August 1999, 121(3): 537–540. doi: https://doi.org/10.1115/1.2832714

Abstract

View articletitled, An Improved Algorithm for Cross-Coupling Control of Multi-Axis Machine Tools

Open the PDF for in another window

Topics: Algorithms , Machine tools

Research Papers

Advancements in Cone-type Rotary Piercing Technology

Inward Flow of Surface Materials at Back-Ends of Billets During Al-Extrusion, Part 1: A Finite Element Model

Inward Flow of Surface Materials at Back-Ends of Billets During Al-Extrusion, Part 2: Influence of Process Parameters

Prediction of Ductile Fracture in Cold Forging of Aluminum Alloy

Analysis of Circular Braiding Process, Part 1: Theoretical Investigation of Kinematics of the Circular Braiding Process

Analysis of Circular Braiding Process, Part 2: Mechanics Analysis of the Circular Braiding Process and Experiment

An Engineering Model for Laser-Induced Sintering of Polymer Powders

Three-Dimensional Finite Element Modelling of Forging of a Titanium Alloy Aerofoil Sectioned Blade

Imaging the Keyhole in PAW of Aluminum Alloys

Thermomechanical Analytical 3D Thermal/Stress Estimation Sidewall Grinding Model

Automated Deburring with a Filamentary Brush: Prescribed Burr Geometry

Energy Partition in Conventional Surface Grinding

Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles

Mechanistic Force Models for Chip Control Tools

Scan Welding: Thermal Modeling and Control of Material Processing

Interval Model Based Robust Control of Weld Joint Penetration

An Experimental Investigation into the Effect of Cutting Fluid Conditions on the Boring of Aluminum Alloys

Temperature Field Regulation in Thermal Cutting for Layered Manufacturing

Layered-Manufacturing of Fiber-Reinforced Composites

Machine Vision Monitoring for Automated Surface Finishing

Materials Modelling and Laser Inspection for the 3D Lay-up of Dry Fiber Composite Preforms

A Novel Device for Producing Three-Dimensional Objects

Workspace Synthesis for Flexible Fixturing of Stampings

An Elastic Contact Model for the Prediction of Workpiece-Fixture Contact Forces in Clamping

Predict and Assure the Matchable Degree in Selective Assembly via PCI-based Tolerance

Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 3: Real-Time Estimation of Heat Sources

Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 4: A Multi-Variable Closed-Loop Control System

Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 5: Experimental Verification

The Identification of Radial Runout in Milling Operations

Technical Briefs

The Effect of Tool Flexibility on Back-Cutting in End Milled Surfaces

An Improved Algorithm for Cross-Coupling Control of Multi-Axis Machine Tools

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only