Journal of Engineering for Industry

Skip Nav Destination

Volume 115, Issue 3

August 1993

This article was originally published in

ISSN 0022-0817

Research Papers

Generation of Milled Surfaces Including Tool Dynamics and Wear

F. Ismail, M. A. Elbestawi, R. Du, K. Urbasik

J. Eng. Ind. August 1993, 115(3): 245–252. doi: https://doi.org/10.1115/1.2901656

Abstract

View articletitled, Generation of Milled Surfaces Including Tool Dynamics and Wear

Open the PDF for in another window

Topics: Dynamics (Mechanics) , Wear , Computer simulation , Errors , Milling , Simulation , Surface roughness , Vibration

Improved Analysis of the Workpiece Accuracy in Turning, Based on the Emerging Diameter

L. Kops, M. Gould, M. Mizrach

J. Eng. Ind. August 1993, 115(3): 253–257. doi: https://doi.org/10.1115/1.2901657

Abstract

View articletitled, Improved Analysis of the Workpiece Accuracy in Turning, Based on the Emerging Diameter

Open the PDF for in another window

Topics: Accounting , Computer simulation , Deflection , Errors , Machining , Turning

Precision Grinding of Ultra-Thin Quartz Wafers

T. G. Bifano, J. B. Hosler

J. Eng. Ind. August 1993, 115(3): 258–262. doi: https://doi.org/10.1115/1.2901658

Abstract

View articletitled, Precision Grinding of Ultra-Thin Quartz Wafers

Open the PDF for in another window

Topics: Grinding , Quartz , Semiconductor wafers , Resonance , Acoustics , Brittleness , Design , Diluents , Feedback , Fixturing

The Effect of Weld Gas Flow Rate on Al-Li Weldability

L. F. Martinez, J. C. McClure, A. C. Nunes, Jr.

J. Eng. Ind. August 1993, 115(3): 263–267. doi: https://doi.org/10.1115/1.2901659

Abstract

View articletitled, The Effect of Weld Gas Flow Rate on Al-Li Weldability

Open the PDF for in another window

Topics: Gas flow , Welding , Hydrogen , Plasmas (Ionized gases) , Aluminum , Contamination , Electric arcs , Emission spectroscopy , Oxygen , Plasma arc welding

Intelligent Real-Time Predictive Diagnostics for Cutting Tools and Supervisory Control of Machining Operations

K. Ramamurthi, C. L. Hough, Jr.

J. Eng. Ind. August 1993, 115(3): 268–277. doi: https://doi.org/10.1115/1.2901660

Abstract

View articletitled, Intelligent Real-Time Predictive Diagnostics for Cutting Tools and Supervisory Control of Machining Operations

Open the PDF for in another window

Topics: Cutting tools , Machining , Failure , Drills (Tools) , Wear , Algorithms , Assembly lines , Drilling , Economics , Failure mechanisms

The Development of Free Machining Sintered Metals Including Nonmetallic Materials

K. Yamaguchi, T. Nakamoto, T. Mizuno, S. Daido

J. Eng. Ind. August 1993, 115(3): 278–283. doi: https://doi.org/10.1115/1.2901661

Abstract

View articletitled, The Development of Free Machining Sintered Metals Including Nonmetallic Materials

Open the PDF for in another window

Topics: Machining , Metals , Nonmetallic materials , Glass , Boron , Cutting , Iron , Metal cutting , Metal impurities , Talc (Mineral)

Rattling Loose of Thread Connected Steels in Percussive Rock Drilling

C. C. Fu

J. Eng. Ind. August 1993, 115(3): 284–289. doi: https://doi.org/10.1115/1.2901662

Abstract

View articletitled, Rattling Loose of Thread Connected Steels in Percussive Rock Drilling

Open the PDF for in another window

Topics: Drilling , Rocks , Steel , Thread , Drills (Tools) , Stress , Torque , Friction , Couplings , Cycles

Finite Element Analysis of Temperatures, Metal Flow, and Roll Pressure in Hot Strip Rolling

S. M. Hwang, M. S. Joun, Y. H. Kang

J. Eng. Ind. August 1993, 115(3): 290–298. doi: https://doi.org/10.1115/1.2901663

Abstract

View articletitled, Finite Element Analysis of Temperatures, Metal Flow, and Roll Pressure in Hot Strip Rolling

Open the PDF for in another window

Topics: Finite element analysis , Flow (Dynamics) , Hot rolling , Metals , Pressure , Temperature , Strips , Friction , Finite element methods , Heat transfer coefficients

Real-Time Control of Sheet Stability During Forming

D. E. Hardt, R. C. Fenn

J. Eng. Ind. August 1993, 115(3): 299–308. doi: https://doi.org/10.1115/1.2901664

Abstract

View articletitled, Real-Time Control of Sheet Stability During Forming

Open the PDF for in another window

Topics: Real-time control , Stability , Trajectories (Physics) , Buckling , Blanks , Compressive stress , Corners (Structural elements) , Errors , Failure , Friction

Thermal Design and Experimental Analysis of Laser and Electron Beam Hardening

R. Festa, F. Nenci, O. Manca, V. Naso

J. Eng. Ind. August 1993, 115(3): 309–314. doi: https://doi.org/10.1115/1.2901665

Abstract

View articletitled, Thermal Design and Experimental Analysis of Laser and Electron Beam Hardening

Open the PDF for in another window

Topics: Cathode ray oscilloscopes , Design , Electron beams , Experimental analysis , Hardening , Lasers , Dimensions , Electrons , Heat , Heating

A Labeling Algorithm for the Navigation of Automated Guided Vehicles

J. Huang, U. S. Palekar, S. G. Kapoor

J. Eng. Ind. August 1993, 115(3): 315–321. doi: https://doi.org/10.1115/1.2901666

Abstract

View articletitled, A Labeling Algorithm for the Navigation of Automated Guided Vehicles

Open the PDF for in another window

Topics: Algorithms , Automated guided vehicles , Navigation , Manufacturing systems , Materials handling , Polynomials , Traffic

Response Time Considerations for Optimal Warehouse Layout Design

R. Pandit, U. S. Palekar

J. Eng. Ind. August 1993, 115(3): 322–328. doi: https://doi.org/10.1115/1.2901667

Abstract

View articletitled, Response Time Considerations for Optimal Warehouse Layout Design

Open the PDF for in another window

Topics: Design , Warehouses , Materials handling , Doors

Advanced Interpolation Techniques for N.C. Machines

S. Bedi, I. Ali, N. Quan

J. Eng. Ind. August 1993, 115(3): 329–336. doi: https://doi.org/10.1115/1.2901668

Abstract

View articletitled, Advanced Interpolation Techniques for N.C. Machines

Open the PDF for in another window

Topics: Interpolation , Machinery , Control equipment , B-splines , Computers , Errors

Active Contact Problems in Epitrochoid Generated ‘Floating Axis’ Orbital Rotary Piston Machines

R. Maiti

J. Eng. Ind. August 1993, 115(3): 337–340. doi: https://doi.org/10.1115/1.2901669

Abstract

View articletitled, Active Contact Problems in Epitrochoid Generated ‘Floating Axis’ Orbital Rotary Piston Machines

Open the PDF for in another window

Topics: Contact mechanics , Machinery , Pistons , Rotors , Stress , Hydrostatics , Stators

A Feasibility Space Approach for Automated Tolerancing

J. U. Turner

J. Eng. Ind. August 1993, 115(3): 341–346. doi: https://doi.org/10.1115/1.2901670

Abstract

View articletitled, A Feasibility Space Approach for Automated Tolerancing

Open the PDF for in another window

Topics: Tolerance analysis

Measurement and Control of a Straightening Process for Seamless Pipes

T. Katoh, E. Urata

J. Eng. Ind. August 1993, 115(3): 347–351. doi: https://doi.org/10.1115/1.2901671

Abstract

View articletitled, Measurement and Control of a Straightening Process for Seamless Pipes

Open the PDF for in another window

Topics: Pipes , Deflection , Hardening (Curing) , Pressure

Development of an Adaptive Force/Position Controller for Robot-Automated Composite Tape-Layering

Y. L. Yao, S. M. Wu

J. Eng. Ind. August 1993, 115(3): 352–358. doi: https://doi.org/10.1115/1.2901672

Abstract

View articletitled, Development of an Adaptive Force/Position Controller for Robot-Automated Composite Tape-Layering

Open the PDF for in another window

Topics: Composite materials , Control equipment , Robots , Errors , Manipulators , Sensors , Actuators , Degrees of freedom , Force control , Robot motion

Technical Briefs

Effects of Operating Parameters on Surface Quality for Laser Cutting of Mild Steel

R. Neimeyer, R. N. Smith, D. A. Kaminski

J. Eng. Ind. August 1993, 115(3): 359–362. doi: https://doi.org/10.1115/1.2901673

View articletitled, Effects of Operating Parameters on Surface Quality for Laser Cutting of Mild Steel

Open the PDF for in another window

Topics: Laser cutting , Steel , Surface quality

Damping Capacity of Turning Tools, Part 1: Effect of Clamping Conditions and Optimum Clamping Load

E. Marui, M. Hashimoto, S. Kato

J. Eng. Ind. August 1993, 115(3): 362–366. doi: https://doi.org/10.1115/1.2901674

Abstract

View articletitled, Damping Capacity of Turning Tools, Part 1: Effect of Clamping Conditions and Optimum Clamping Load

Open the PDF for in another window

Topics: Damping , Stress , Turning , Chatter , Excitation , Machine tools , Stability , Stiffness , Vibration

Damping Capacity of Turning Tools, Part 2: Mechanism Initiating the Damping Capacity

M. Hashimoto, E. Marui, S. Kato

J. Eng. Ind. August 1993, 115(3): 366–370. doi: https://doi.org/10.1115/1.2901675

Abstract

View articletitled, Damping Capacity of Turning Tools, Part 2: Mechanism Initiating the Damping Capacity

Open the PDF for in another window

Topics: Damping , Turning , Friction , Oscillating frequencies , Stress , Vibration

The Use of Force Ratios in the Tracking of Tool Wear in Turning

I. Yellowley, C. T. Lai

J. Eng. Ind. August 1993, 115(3): 370–372. doi: https://doi.org/10.1115/1.2901676

View articletitled, The Use of Force Ratios in the Tracking of Tool Wear in Turning

Open the PDF for in another window

Topics: Turning , Wear

Tribological Aspects of Metal Cutting

B. M. Kramer

J. Eng. Ind. August 1993, 115(3): 372–376. doi: https://doi.org/10.1115/1.2901677

Abstract

View articletitled, Tribological Aspects of Metal Cutting

Open the PDF for in another window

Topics: Metal cutting , Tribology , Wear , Analytical methods , Calibration , Chemical properties , Contamination , Cutting , Cutting tools , Design

Research Papers

Generation of Milled Surfaces Including Tool Dynamics and Wear

Improved Analysis of the Workpiece Accuracy in Turning, Based on the Emerging Diameter

Precision Grinding of Ultra-Thin Quartz Wafers

The Effect of Weld Gas Flow Rate on Al-Li Weldability

Intelligent Real-Time Predictive Diagnostics for Cutting Tools and Supervisory Control of Machining Operations

The Development of Free Machining Sintered Metals Including Nonmetallic Materials

Rattling Loose of Thread Connected Steels in Percussive Rock Drilling

Finite Element Analysis of Temperatures, Metal Flow, and Roll Pressure in Hot Strip Rolling

Real-Time Control of Sheet Stability During Forming

Thermal Design and Experimental Analysis of Laser and Electron Beam Hardening

A Labeling Algorithm for the Navigation of Automated Guided Vehicles

Response Time Considerations for Optimal Warehouse Layout Design

Advanced Interpolation Techniques for N.C. Machines

Active Contact Problems in Epitrochoid Generated ‘Floating Axis’ Orbital Rotary Piston Machines

A Feasibility Space Approach for Automated Tolerancing

Measurement and Control of a Straightening Process for Seamless Pipes

Development of an Adaptive Force/Position Controller for Robot-Automated Composite Tape-Layering

Technical Briefs

Effects of Operating Parameters on Surface Quality for Laser Cutting of Mild Steel

Damping Capacity of Turning Tools, Part 1: Effect of Clamping Conditions and Optimum Clamping Load

Damping Capacity of Turning Tools, Part 2: Mechanism Initiating the Damping Capacity

The Use of Force Ratios in the Tracking of Tool Wear in Turning

Tribological Aspects of Metal Cutting

Email alerts

RSS Feeds

Journals

Conference Proceedings

eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only