Volume 114 Issue 4 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 114, Issue 4

November 1992

This article was originally published in

Journal of Engineering for Industry

ISSN 0022-0817

Research Papers

Mechanical and Thermal Stresses in Clamped, Brazed, and Bonded Carbide Tools

M. A. Younis

J. Eng. Ind. November 1992, 114(4): 377–385. doi: https://doi.org/10.1115/1.2900687

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Carbide cutting tools , Thermal stresses , Compressive stress , High temperature , Cutting , Finite element methods , Heat , Low temperature , Metal cutting , Rupture

Prediction of Cutting Forces and Tool Breakage in Milling from Feed Drive Current Measurements

Y. Altintas

J. Eng. Ind. November 1992, 114(4): 386–392. doi: https://doi.org/10.1115/1.2900688

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Cutting , Milling , Failure , Force measurement , Friction , Motors , Algorithms , Control systems , Filters , Filtration

Phase Characteristics of Self-Excited Chatter in Cutting

N. Kasahara, H. Sato, Y. Tani

J. Eng. Ind. November 1992, 114(4): 393–399. doi: https://doi.org/10.1115/1.2900689

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Chatter , Cutting , Compliance , Dynamics (Mechanics) , Measurement systems , Oscillations , Vibration

An Improved Model for Force Transients in Turning

K. Danai, R. Nair, S. Malkin

J. Eng. Ind. November 1992, 114(4): 400–403. doi: https://doi.org/10.1115/1.2900690

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Transients (Dynamics) , Turning , Cutting , Geometry , Wear

The Morphology of Machining Chips Formed During Low Speed Quasi-Orthogonal Machining of CA 360 Brass and a Model for Their Formation

R. Stevenson

J. Eng. Ind. November 1992, 114(4): 404–411. doi: https://doi.org/10.1115/1.2900691

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Brass (Metal) , Machining , Shear (Mechanics) , Stress , Deformation , Fluctuations (Physics) , Computation , Cutting , Etching , Metallography

Predictive Control of a Robotic Grinding System

T. R. Kurfess, D. E. Whitney

J. Eng. Ind. November 1992, 114(4): 412–420. doi: https://doi.org/10.1115/1.2900692

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Grinding , Predictive control , Robotics , Control equipment , Trajectories (Physics) , Algorithms , Dynamics (Mechanics) , Errors , Modeling , Noise (Sound)

Chemical Smoothing of Rough Metal Surfaces

D. E. Kim, N. P. Suh

J. Eng. Ind. November 1992, 114(4): 421–426. doi: https://doi.org/10.1115/1.2900693

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Metal surfaces , Surface roughness , Chemical etching , Chemical reactions , Diffusion (Physics) , Dynamics (Mechanics) , Electric discharge , Mass transfer , Metals , Stainless steel

Analysis of Fluid Flow through the Grinding Zone

C. Guo, S. Malkin

J. Eng. Ind. November 1992, 114(4): 427–434. doi: https://doi.org/10.1115/1.2900694

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Fluid dynamics , Grinding , Wheels , Porosity , Flow (Dynamics) , Fluids , Nozzles , Creep , Fittings , Porous materials

The Effect of Particle Feed Rate on the Plastic Media Blast Jet

M. J. McIntosh

J. Eng. Ind. November 1992, 114(4): 435–440. doi: https://doi.org/10.1115/1.2900695

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Particulate matter , Damage , Blasting , Flight , Kinetic energy , Military aircraft , Momentum , Nozzles , Paints , Pressure

Finite Element Simulation of Welding of Large Structures

S. Brown, H. Song

J. Eng. Ind. November 1992, 114(4): 441–451. doi: https://doi.org/10.1115/1.2900696

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Finite element analysis , Simulation , Welding , Stress , Clearances (Engineering) , Fixturing , Boundary-value problems , Circular cylinders , Computer simulation , Constitutive equations

Application of Finite Element Method to the Design of Superplastic Forming Processes

N. Chandra, S. C. Rama

J. Eng. Ind. November 1992, 114(4): 452–458. doi: https://doi.org/10.1115/1.2900697

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Design , Finite element methods , Superplastic forming , Superplasticity , Aerospace industry , Friction , Metalworking , Plane strain , Pressure

Three-Dimensional Finite Element Analysis on Open-Die Block Forging Design

Chinghua Hung, Shiro Kobayashi

J. Eng. Ind. November 1992, 114(4): 459–464. doi: https://doi.org/10.1115/1.2900698

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Design , Finite element analysis , Forging , Finite element methods , Modeling , Rotation , Shapes

Transient Analysis of an Asymmetric Rotor-Bearing System During Acceleration

An-Chen Lee, Yuan Kang, Kun-Lung Tsai, Kuo-Mo Hsiao

J. Eng. Ind. November 1992, 114(4): 465–475. doi: https://doi.org/10.1115/1.2900699

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Bearings , Rotors , Transient analysis , Equations of motion , Finite element model , Transients (Dynamics) , Disks , Resonance , Vibration

On-Line Roundness Error Compensation via P-Integrator Learning Control

C. J. Li, S. Y. Li

J. Eng. Ind. November 1992, 114(4): 476–480. doi: https://doi.org/10.1115/1.2900700

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Error compensation , Turning , Computer numerical control machine tools , Control equipment , Errors , Inspection , Metrology

Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model

E. Sachs, M. Cima, P. Williams, D. Brancazio, J. Cornie

J. Eng. Ind. November 1992, 114(4): 481–488. doi: https://doi.org/10.1115/1.2900701

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Additive manufacturing , Computer-aided design , Engineering prototypes , Rapid tooling , Ceramics , Binders (Materials) , Cermets , Inks , Manufacturing , Printing

An Ultrasonic Double-Sheet Detection System for Collators

M. Shiraishi, Y. Fujinuma, T. Ishikawa, K. Ishige, H. Doki

J. Eng. Ind. November 1992, 114(4): 489–493. doi: https://doi.org/10.1115/1.2900702

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Bindery equipment , Fluctuations (Physics) , Signals , Temperature

Tool Status Recording and Its Use in Probabilistic Optimization

Chen Zhou, R. A. Wysk

J. Eng. Ind. November 1992, 114(4): 494–499. doi: https://doi.org/10.1115/1.2900703

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Cutting , Cutting tools , Decision making , Failure , Flexible manufacturing systems , Machining , Machining centers , Optimization , Tooling , Wear

The Optimization of Machining Operations Based on a Combined Criterion, Part 1: The Use of Combined Objectives in Single-Pass Operations

J. S. Agapiou

J. Eng. Ind. November 1992, 114(4): 500–507. doi: https://doi.org/10.1115/1.2900704

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Machining , Optimization , Weight (Mass) , Cutting , Sensitivity analysis

The Optimization of Machining Operations Based on a Combined Criterion, Part 2: Multipass Operations

J. S. Agapiou

J. Eng. Ind. November 1992, 114(4): 508–513. doi: https://doi.org/10.1115/1.2900705

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Machining , Optimization , Dynamic programming , Cutting , Turning

Modelling and Optimization of the NO Formation in an Industrial Glass Furnace

M. G. Carvalho, V. S. Semia˜o, P. J. Coelho

J. Eng. Ind. November 1992, 114(4): 514–523. doi: https://doi.org/10.1115/1.2900706

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Glass furnaces , Modeling , Optimization , Emissions , Turbulence , Chemical reactions , Combustion , Density , Flames , Fluctuations (Physics)

Optimization of Multistage Machining Systems, Part 1: Mathematical Solution

J. S. Agapiou

J. Eng. Ind. November 1992, 114(4): 524–531. doi: https://doi.org/10.1115/1.2900707

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Machining , Optimization , Algorithms , Cutting , Finishes , Manufacturing , Mathematical analysis

Optimization of Multistage Machining Systems, Part 2: The Algorithm and Applications

J. S. Agapiou

J. Eng. Ind. November 1992, 114(4): 532–538. doi: https://doi.org/10.1115/1.2900708

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Algorithms , Machining , Optimization , Cutting , Delays , Mathematical analysis

The Importance of the Application Sequence of Clamping Forces on Workpiece Accuracy

C. Cogun

J. Eng. Ind. November 1992, 114(4): 539–543. doi: https://doi.org/10.1115/1.2900709

Abstract

View articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Open the PDF for in another window

Topics: Displacement , Machine tools

Research Papers

Mechanical and Thermal Stresses in Clamped, Brazed, and Bonded Carbide Tools

Prediction of Cutting Forces and Tool Breakage in Milling from Feed Drive Current Measurements

Phase Characteristics of Self-Excited Chatter in Cutting

An Improved Model for Force Transients in Turning

The Morphology of Machining Chips Formed During Low Speed Quasi-Orthogonal Machining of CA 360 Brass and a Model for Their Formation

Predictive Control of a Robotic Grinding System

Chemical Smoothing of Rough Metal Surfaces

Analysis of Fluid Flow through the Grinding Zone

The Effect of Particle Feed Rate on the Plastic Media Blast Jet

Finite Element Simulation of Welding of Large Structures

Application of Finite Element Method to the Design of Superplastic Forming Processes

Three-Dimensional Finite Element Analysis on Open-Die Block Forging Design

Transient Analysis of an Asymmetric Rotor-Bearing System During Acceleration

On-Line Roundness Error Compensation via P-Integrator Learning Control

Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model

An Ultrasonic Double-Sheet Detection System for Collators

Tool Status Recording and Its Use in Probabilistic Optimization

The Optimization of Machining Operations Based on a Combined Criterion, Part 1: The Use of Combined Objectives in Single-Pass Operations

The Optimization of Machining Operations Based on a Combined Criterion, Part 2: Multipass Operations

Modelling and Optimization of the NO Formation in an Industrial Glass Furnace

Optimization of Multistage Machining Systems, Part 1: Mathematical Solution

Optimization of Multistage Machining Systems, Part 2: The Algorithm and Applications

The Importance of the Application Sequence of Clamping Forces on Workpiece Accuracy

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only