Abstract
Binder jetting is an additive manufacturing process utilizing a liquid-based binding agent to selectively join the material in a powder bed. It is capable of manufacturing complex-shaped parts from a variety of materials including metals, ceramics, and polymers. This paper provides a comprehensive review on currently available reports on metal binder jetting from both academia and industry. Critical factors and their effects in metal binder jetting are reviewed and divided into two categories, namely material-related factors and process-related parameters. The reported data on density, dimensional and geometric accuracy, and mechanical properties achieved by metal binder jetting are summarized. With parameter optimization and a suitable sintering process, ten materials have been proven to achieve a relative density of higher than 90%. Indepth discussion is provided regarding densification as a function of various attributes of powder packing, printing, and post-processing. A few grades of stainless steel obtained equivalent or superior mechanical properties compared to cold working. Although binder jetting has gained its popularity in the past several years, it has not been sufficiently studied compared with other metal additive manufacturing (AM) processes such as powder bed fusion and directed energy deposition. Some aspects that need further research include the understanding of powder spreading process, binder-powder interaction, and part shrinkage.
Issue Section:
Review Article
References
1.
Frazier
, W. E.
, 2014
, “Metal Additive Manufacturing: A Review
,” J. Mater. Eng. Perform.
, 23
(6
), pp. 1917
–1928
. 10.1007/s11665-014-0958-z2.
Guo
, N.
, and Leu
, M. C.
, 2013
, “Additive Manufacturing: Technology, Applications and Research Needs
,” Front. Mech. Eng.
, 8
(3
), pp. 215
–243
. 10.1007/s11465-013-0248-83.
Kumar
, A.
, Mandal
, S.
, Barui
, S.
, Vasireddi
, R.
, Gbureck
, U.
, Gelinsky
, M.
, and Basu
, B.
, 2016
, “3D Printing of Ceramic Implants
,” Mater. Sci. Eng. R: Rep.
, 103
, pp. 1
–39
. 10.1016/j.mser.2016.01.0014.
Ohji
, T.
, 2018
, “Additive Manufacturing of Ceramic Components
,” Synthesiology
, 11
(2
), pp. 81
–93
. 10.5571/synth.11.2_815.
Song
, Y.
, Yan
, Y.
, Zhang
, R.
, Xu
, D.
, and Wang
, F.
, 2002
, “Manufacture of the Die of an Automobile Deck Part Based on Rapid Prototyping and Rapid Tooling Technology
,” J. Mater. Process. Technol.
, 120
(1–3
), pp. 237
–242
. 10.1016/S0924-0136(01)01165-76.
Thomas
, C. L.
, Gaffney
, T. M.
, Kaza
, S.
, and Lee
, C. H.
, 1996
, “Rapid Prototyping of Large Scale Aerospace Structures
,” 1996 IEEE Aerospace Applications Conference
, Aspen, CO
, Feb. 10
, pp. 219
–230
.7.
Yap
, C. Y.
, Chua
, C. K.
, Dong
, Z. L.
, Liu
, Z. H.
, Zhang
, D. Q.
, Loh
, L. E.
, and Sing
, S. L.
, 2015
, “Review of Selective Laser Melting: Materials and Applications
,” Appl. Phys. Rev.
, 2
(4
).8.
Du
, W.
, Ren
, X.
, Ma
, C.
, and Pei
, Z.
, 2017
, “Binder Jetting Additive Manufacturing of Ceramics: A Literature Review
,” ASME 2017 International Mechanical Engineering Congress and Exposition
, Tampa, FL
, Nov. 3–9
, p. V014T007A006.9.
Du
, W.
, Ren
, X.
, Pei
, Z.
, and Ma
, C.
, 2020
, “Ceramic Binder Jetting Additive Manufacturing: A Literature Review on Density
,” ASME J. Manuf. Sci. Eng.
, 142
(4
), p. 040801
. 10.1115/1.404624810.
Li
, M.
, Du
, W.
, Elwany
, A.
, Pei
, Z.
, and Ma
, C.
, 2018
, “Binder Jetting Additive Manufacturing of Metals: A Literature Review
,” ASME 2019 International Manufacturing Science and Engineering Conference
, College Station, TX
, June 18–22
, p. V001T001A033.11.
Medellin
, A.
, Du
, W.
, Miao
, G.
, Zou
, J.
, Pei
, Z.
, and Ma
, C.
, 2019
, “Vat Photopolymerization 3D Printing of Nanocomposites: A Literature Review
,” ASME J. Micro Nano-Manuf.
, 7
(3
), p. 031006
. 10.1115/1.404428812.
ASTM International
, 2015
, “ISO/ASTM 52900: Additive Manufacturing-General Principles-Terminology
,” ASTM International, West Conshohocken, PA.13.
Wong
, K. V.
, and Hernandez
, A.
, 2012
, “A Review of Additive Manufacturing
,” ISRN Mech. Eng.
, 2012
.14.
Ren
, X.
, Shao
, H.
, Lin
, T.
, and Zheng
, H. J.
, 2016
, “3D Gel-Printing—An Additive Manufacturing Method for Producing Complex Shape Parts
,” Mater. Des.
, 101
, pp. 80
–87
. 10.1016/j.matdes.2016.03.15215.
White
, D.
, and Carmein
, D. E. E.
, 2003
, “Ultrasonic Object Consolidation
,” Solidica Inc
, U.S. Patent No. 6519500.16.
White
, D.
, and Carmein
, D. E.
, 2002
, “Ultrasonic Object Consolidation System and Method
,” Solidica Inc.
, U.S. Patent No. 6463349.17.
Olakanmi
, E. O.
, Cochrane
, R. F.
, and Dalgarno
, K. W.
, 2015
, “A Review on Selective Laser Sintering/Melting (SLS/SLM) of Aluminium Alloy Powders: Processing, Microstructure, and Properties
,” Prog. Mater. Sci.
, 74
, pp. 401
–477
. 10.1016/j.pmatsci.2015.03.00218.
Kruth
, J. P.
, Froyen
, L.
, Van Vaerenbergh
, J.
, Mercelis
, P.
, Rombouts
, M.
, and Lauwers
, B.
, 2004
, “Selective Laser Melting of Iron-Based Powder
,” J. Mater. Process. Technol.
, 149
(1–3
), pp. 616
–622
. 10.1016/j.jmatprotec.2003.11.05119.
Moat
, R. J.
, Pinkerton
, A. J.
, Li
, L.
, Withers
, P. J.
, and Preuss
, M.
, 2011
, “Residual Stresses in Laser Direct Metal Deposited Waspaloy
,” Mater. Sci. Eng. A
, 528
(6
), pp. 2288
–2298
. 10.1016/j.msea.2010.12.01020.
Yu
, T.
, Li
, M.
, Breaux
, A.
, Atri
, M.
, Obeidat
, S.
, and Ma
, C.
, 2019
, “Experimental and Numerical Study on Residual Stress and Geometric Distortion in Powder Bed Fusion Process
,” J. Manuf. Processes
, 46
, pp. 214
–224
. 10.1016/j.jmapro.2019.09.01021.
Jiang
, R.
, Mostafaei
, A.
, Pauza
, J.
, Kantzos
, C.
, and Rollett
, A. D.
, 2019
, “Varied Heat Treatments and Properties of Laser Powder Bed Printed Inconel 718
,” Mater. Sci. Eng.: A
, 755
, pp. 170
–180
. 10.1016/j.msea.2019.03.10322.
Bai
, Y.
, and Williams
, C. B.
, 2015
, “An Exploration of Binder Jetting of Copper
,” Rapid Prototyping J.
, 21
(2
), pp. 177
–185
. 10.1108/RPJ-12-2014-018023.
Mostafaei
, A.
, Toman
, J.
, Stevens
, E. L.
, Hughes
, E. T.
, Krimer
, Y. L.
, and Chmielus
, M.
, 2017
, “Microstructural Evolution and Mechanical Properties of Differently Heat-Treated Binder Jet Printed Samples From Gas- and Water-Atomized Alloy 625 Powders
,” Acta Mater.
, 124
, pp. 280
–289
. 10.1016/j.actamat.2016.11.02124.
Nandwana
, P.
, Elliott
, A. M.
, Siddel
, D.
, Merriman
, A.
, Peter
, W. H.
, and Babu
, S. S.
, 2017
, “Powder Bed Binder Jet 3D Printing of Inconel 718: Densification, Microstructural Evolution and Challenges⋆
,” Curr. Opin. Solid State Mater. Sci.
, 21
(4
), pp. 207
–218
. 10.1016/j.cossms.2016.12.00225.
26.
Desktop Metal
, “Production System™
”, https://www.desktopmetal.com/products/production, Accessed May 2020.27.
Digital Metal
, “DIGITAL METAL®DM P2500
”, https://digitalmetal.tech/printer-line/dm-p2500/, Accessed May 2020.28.
Abd-Elghany
, K.
, and Bourell
, D.
, 2012
, “Property Evaluation of 304L Stainless Steel Fabricated by Selective Laser Melting
,” Rapid Prototyping J.
, 18
(5
), pp. 420
–428
. 10.1108/1355254121125041829.
Li
, S.
, Wei
, Q.
, Shi
, Y.
, Zhu
, Z.
, and Zhang
, D.
, 2015
, “Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
,” J. Mater. Sci. Technol.
, 31
(9
), pp. 946
–952
. 10.1016/j.jmst.2014.09.02030.
Louvis
, E.
, Fox
, P.
, and Sutcliffe
, C. J.
, 2011
, “Selective Laser Melting of Aluminium Components
,” J. Mater. Process. Technol.
, 211
(2
), pp. 275
–284
. 10.1016/j.jmatprotec.2010.09.01931.
Rafi
, H.
, Karthik
, N.
, Gong
, H.
, Starr
, T. L.
, and Stucker
, B. E.
, 2013
, “Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
,” J. Mater. Eng. Perform.
, 22
(12
), pp. 3872
–3883
. 10.1007/s11665-013-0658-032.
Murr
, L. E.
, 2015
, “Metallurgy of Additive Manufacturing: Examples From Electron Beam Melting
,” Addit. Manuf.
, 5
, pp. 40
–53
. 10.1016/j.addma.2014.12.00233.
Hinojos
, A.
, Mireles
, J.
, Reichardt
, A.
, Frigola
, P.
, Hosemann
, P.
, Murr
, L. E.
, and Wicker
, R. B.
, 2016
, “Joining of Inconel 718 and 316 Stainless Steel Using Electron Beam Melting Additive Manufacturing Technology
,” Mater. Des.
, 94
, pp. 17
–27
. 10.1016/j.matdes.2016.01.04134.
Murr
, L. E.
, Gaytan
, S. M.
, Ramirez
, D. A.
, Martinez
, E.
, Hernandez
, J.
, Amato
, K. N.
, Shindo
, P. W.
, Medina
, F. R.
, and Wicker
, R. B.
, 2012
, “Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
,” J. Mater. Sci. Technol.
, 28
(1
), pp. 1
–14
. 10.1016/S1005-0302(12)60016-435.
Murr
, L. E.
, Martinez
, E.
, Amato
, K. N.
, Gaytan
, S. M.
, Hernandez
, J.
, Ramirez
, D. A.
, Shindo
, P. W.
, Medina
, F.
, and Wicker
, R. B.
, 2012
, “Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science
,” J. Mater. Res. Technol.
, 1
(1
), pp. 42
–54
. 10.1016/S2238-7854(12)70009-136.
Murr
, L. E.
, Martinez
, E.
, Gaytan
, S. M.
, Ramirez
, D. A.
, Machado
, B. I.
, Shindo
, P. W.
, Martinez
, J. L.
, Medina
, F.
, Wooten
, J.
, Ciscel
, D.
, Ackelid
, U.
, and Wicker
, R. B.
, 2011
, “Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
,” Metall. Mater. Trans. A
, 42
(11
), pp. 3491
–3508
. 10.1007/s11661-011-0748-237.
Li
, H.
, Ramezani
, M.
, Li
, M.
, Ma
, C.
, and Wang
, J.
, 2018
, “Tribological Performance of Selective Laser Melted 316L Stainless Steel
,” Tribol. Int.
, 128
, pp. 121
–129
. 10.1016/j.triboint.2018.07.02138.
Li
, H.
, Ramezani
, M.
, Li
, M.
, Ma
, C.
, and Wang
, J.
, 2018
, “Effect of Process Parameters on Tribological Performance of 316L Stainless Steel Parts Fabricated by Selective Laser Melting
,” Manuf. Lett.
, 16
, pp. 36
–39
. 10.1016/j.mfglet.2018.04.00339.
Li
, M.
, Fang
, A.
, Martinez-Franco
, E.
, Alvarado-Orozco
, J.
, Pei
, Z.
, and Ma
, C.
, 2019
, “Selective Laser Melting of Metal Matrix Composites: Feedstock Powder Preparation by Electroless Plating
,” Mater. Lett.
, 247
, pp. 115
–118
. 10.1016/j.matlet.2019.03.09240.
Graybill
, B.
, Li
, M.
, Malawey
, D.
, Ma
, C.
, Alvarado-Orozco
, J.-M.
, and Martinez-Franco
, E.
, 2018
, “Additive Manufacturing of Nickel-Based Superalloys
,” 13th International Manufacturing Science and Engineering Conference
, College Station, TX
, June 18–22
, p. V001T001A015.41.
Wang
, Z.
, Palmer
, T. A.
, and Beese
, A. M.
, 2016
, “Effect of Processing Parameters on Microstructure and Tensile Properties of Austenitic Stainless Steel 304L Made by Directed Energy Deposition Additive Manufacturing
,” Acta Mater.
, 110
, pp. 226
–235
. 10.1016/j.actamat.2016.03.01942.
Carroll
, B. E.
, Otis
, R. A.
, Borgonia
, J. P.
, Suh
, J.-o.
, Dillon
, R. P.
, Shapiro
, A. A.
, Hofmann
, D. C.
, Liu
, Z.-K.
, and Beese
, A. M.
, 2016
, “Functionally Graded Material of 304L Stainless Steel and Inconel 625 Fabricated by Directed Energy Deposition: Characterization and Thermodynamic Modeling
,” Acta Mater.
, 108
, pp. 46
–54
. 10.1016/j.actamat.2016.02.01943.
Thompson
, S. M.
, Bian
, L.
, Shamsaei
, N.
, and Yadollahi
, A.
, 2015
, “An Overview of Direct Laser Deposition for Additive Manufacturing; Part I: Transport Phenomena, Modeling and Diagnostics
,” Addit. Manuf.
, 8
, pp. 36
–62
. 10.1016/j.addma.2015.07.00144.
Carroll
, B. E.
, Palmer
, T. A.
, and Beese
, A. M.
, 2015
, “Anisotropic Tensile Behavior of Ti–6Al–4V Components Fabricated With Directed Energy Deposition Additive Manufacturing
,” Acta Mater.
, 87
, pp. 309
–320
. 10.1016/j.actamat.2014.12.05445.
Fujishima
, M.
, Oda
, Y.
, Ashida
, R.
, Takezawa
, K.
, and Kondo
, M.
, 2017
, “Study on Factors for Pores and Cladding Shape in the Deposition Processes of Inconel 625 by the Directed Energy Deposition (DED) Method
,” CIRP J. Manuf. Sci. Technol.
, 19
, pp. 200
–204
. 10.1016/j.cirpj.2017.04.00346.
Arrizubieta
, J. I.
, Lamikiz
, A.
, Cortina
, M.
, Ukar
, E.
, and Alberdi
, A.
, 2018
, “Hardness, Grainsize and Porosity Formation Prediction on the Laser Metal Deposition of AISI 304 Stainless Steel
,” Int. J. Mach. Tools Manuf.
, 135
, pp. 53
–64
. 10.1016/j.ijmachtools.2018.08.00447.
Beese
, A. M.
, and Carroll
, B. E.
, 2015
, “Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
,” JOM
, 68
(3
), pp. 724
–734
. 10.1007/s11837-015-1759-z48.
Reichardt
, A.
, Dillon
, R. P.
, Borgonia
, J. P.
, Shapiro
, A. A.
, McEnerney
, B. W.
, Momose
, T.
, and Hosemann
, P.
, 2016
, “Development and Characterization of Ti-6Al-4V to 304L Stainless Steel Gradient Components Fabricated With Laser Deposition Additive Manufacturing
,” Mater. Des.
, 104
, pp. 404
–413
. 10.1016/j.matdes.2016.05.01649.
Puppala
, G.
, Moitra
, A.
, Sathyanarayanan
, S.
, Kaul
, R.
, Sasikala
, G.
, Prasad
, R. C.
, and Kukreja
, L. M.
, 2014
, “Evaluation of Fracture Toughness and Impact Toughness of Laser Rapid Manufactured Inconel-625 Structures and Their Co-relation
,” Mater. Des.
, 59
, pp. 509
–515
. 10.1016/j.matdes.2014.03.01350.
Javidani
, M.
, Arreguin-Zavala
, J.
, Danovitch
, J.
, Tian
, Y.
, and Brochu
, M.
, 2016
, “Additive Manufacturing of AlSi10Mg Alloy Using Direct Energy Deposition: Microstructure and Hardness Characterization
,” J. Therm. Spray Technol.
, 26
(4
), pp. 587
–597
. 10.1007/s11666-016-0495-451.
Guo
, P.
, Zou
, B.
, Huang
, C.
, and Gao
, H.
, 2017
, “Study on Microstructure, Mechanical Properties and Machinability of Efficiently Additive Manufactured AISI 316L Stainless Steel by High-Power Direct Laser Deposition
,” J. Mater. Process. Technol.
, 240
, pp. 12
–22
. 10.1016/j.jmatprotec.2016.09.00552.
Lindemann
, C.
, Jahnke
, U.
, Moi
, M.
, and Koch
, R.
, 2012
, “Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additive Manufacturing
,” 23rd Annual International Solid Freeform Fabrication Symposium
, Austin, TX
, Aug. 6–8
, pp. 177
–188
.53.
Do
, T.
, Shin
, C. S.
, Stetsko
, D.
, VanConant
, G.
, Vartanian
, A.
, Pei
, S.
, and Kwon
, P.
, 2015
, “Improving Structural Integrity with Boron-Based Additives for 3D Printed 420 Stainless Steel
,” Proc. Manuf.
, 1
, pp. 263
–272
. 10.1016/j.promfg.2015.09.01954.
Zhang
, Y.
, Wu
, L.
, Guo
, X.
, Kane
, S.
, Deng
, Y.
, Jung
, Y.-G.
, Lee
, J.-H.
, and Zhang
, J. J.
, 2018
, “Additive Manufacturing of Metallic Materials: A Review
,” J. Mater. Eng. Perform.
, 27
(1
), pp. 1
–13
. 10.1007/s11665-017-2747-y55.
Dini
, F.
, Ghaffari
, S. A.
, Jafar
, J.
, Hamidreza
, R.
, and Marjan
, S. J.
, 2019
, “A Review of Binder jet Process Parameters; Powder, Binder, Printing and Sintering Condition
,” Met. Powder Rep.
, 75
(2
), pp. 95
–100
. 10.1016/j.mprp.2019.05.00156.
Lores
, A.
, Azurmendi
, N.
, Agote
, I.
, and Zuza
, E.
, 2019
, “A Review on Recent Developments in Binder Jetting Metal Additive Manufacturing: Materials and Process Characteristics
,” Powder Metall.
, 62
(5
), pp. 267
–296
. 10.1080/00325899.2019.166929957.
Ziaee
, M.
, and Crane
, N. B.
, 2019
, “Binder Jetting: A Review of Process, Materials, and Methods
,” Addit. Manuf.
, 28
, pp. 781
–801
. 10.1016/j.addma.2019.05.03158.
Wieland
, S.
, and Petzoldt
, F.
, 2016
, “Binder Jet 3D-Printing for Metal Additive Manufacturing: Applications and Innovative Approaches
,” CFI Ceram. Forum Int. 93
, pp. E26
–E30
.59.
Mirzababaei
, S.
, and Pasebani
, S.
, 2019
, “A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel
,” J. Manuf. Mater. Process.
, 3
(3
), p. 82
. 10.3390/jmmp303008260.
Utela
, B.
, Storti
, D.
, Anderson
, R.
, and Ganter
, M.
, 2008
, “A Review of Process Development Steps for New Material Systems in Three Dimensional Printing (3DP)
,” J. Manuf. Process.
, 10
(2
), pp. 96
–104
. 10.1016/j.jmapro.2009.03.00261.
Utela
, B. R.
, Storti
, D.
, Anderson
, R. L.
, and Ganter
, M.
, 2010
, “Development Process for Custom Three-Dimensional Printing (3DP) Material Systems
,” J. Manuf. Sci. Eng.
, 132
(1
), p. 011008
. 10.1115/1.400071362.
Bai
, Y.
, Wagner
, G.
, and Williams
, C. B.
, 2015
, “Effect of Bimodal Powder Mixture on Powder Packing Density and Sintered Density in Binder Jetting of Metals
,” 2015 Annual International Solid Freeform Fabrication Symposium
, Austin, TX
, pp. 758
–771
.63.
Kumar
, A.
, Bai
, Y.
, Eklund
, A.
, and Williams
, C. B.
, 2017
, “Effects of Hot Isostatic Pressing on Copper Parts Fabricated via Binder Jetting
,” Proc. Manuf.
, 10
, pp. 935
–944
. 10.1016/j.promfg.2017.07.08464.
Bai
, Y.
, and Williams
, C. B.
, 2017
, “Binderless Jetting: Additive Manufacturing of Metal Parts via Jetting Nanoparticles
,” 28th Annual International Solid Freeform Fabrication Symposium
, Austin, TX
, pp. 249
–260
.65.
Fang
, Z. Z.
, 2010
, “Kinetics and Mechanisms of Densification,” Sintering of Advanced Materials
, M.
Rahaman
, ed., Elsevier
, New York
, pp. 33
–64
.66.
Fang
, Z.Z.
, 2010
, “Thermodynamics of Sintering,” Sintering of Advanced Materials
, R.
German
, ed., Elsevier
, New York
, pp. 3
–32
.67.
Wheat
, E.
, Vlasea
, M.
, Hinebaugh
, J.
, and Metcalfe
, C.
, 2018
, “Sinter Structure Analysis of Titanium Structures Fabricated via Binder Jetting Additive Manufacturing
,” Mater. Des.
, 156
, pp. 167
–183
. 10.1016/j.matdes.2018.06.03868.
Mostafaei
, A.
, De Vecchis
, P. R.
, Nettleship
, I.
, and Chmielus
, M.
, 2019
, “Effect of Powder Size Distribution on Densification and Microstructural Evolution of Binder-Jet 3D-Printed Alloy 625
,” Mater. Des.
, 162
, pp. 375
–383
. 10.1016/j.matdes.2018.11.05169.
Do
, T.
, Kwon
, P.
, and Shin
, C. S.
, 2017
, “Process Development Toward Full-Density Stainless Steel Parts With Binder Jetting Printing
,” Int. J. Mach. Tools Manuf.
, 121
, pp. 50
–60
. 10.1016/j.ijmachtools.2017.04.00670.
Sun
, L.
, Kim
, Y.-H.
, and Kwon
, P.
, 2009
, “Densification and Properties of 420 Stainless Steel Produced by Three-Dimensional Printing With Addition of Si3N4 Powder
,” ASME J. Manuf. Sci. Eng.
, 131
(6
), p. 061001
. 10.1115/1.400033571.
Doyle
, M.
, Agarwal
, K.
, Sealy
, W.
, and Schull
, K.
, 2015
, “Effect of Layer Thickness and Orientation on Mechanical Behavior of Binder Jet Stainless Steel 420 + Bronze Parts
,” Proc. Manuf.
, 1
, pp. 251
–262
. 10.1016/j.promfg.2015.09.01672.
Inaekyan
, K.
, Paserin
, V.
, Bailon-Poujol
, I.
, and Brailovski
, V.
, 2016
, “Binder-Jetting Additive Manufacturing with Water Atomized Iron Powders
,” AMPM 2016 Conference on Additive Manufacturing
, Boston, MA
, June 2016
, pp. 5
–7
.73.
Sachs
, E.
, Wylonis
, E.
, Allen
, S.
, Cima
, M.
, and Guo
, H.
, 2000
, “Production of Injection Molding Tooling With Conformal Cooling Channels Using the Three Dimensional Printing Process
,” Polym. Eng. Sci.
, 40
(5
), pp. 1232
–1247
. 10.1002/pen.1125174.
Crane
, N. B.
, Wilkes
, J.
, Sachs
, E.
, and Allen
, S. M.
, 2006
, “Improving Accuracy of Powder-Based SFF Processes by Metal Deposition From a Nanoparticle Dispersion
,” Rapid Prototyping J.
, 12
(5
), pp. 266
–274
. 10.1108/1355254061070702275.
Kernan
, B. D.
, Sachs
, E. M.
, Allen
, S. M.
, Lorenz
, A.
, Sachs
, C.
, Raffenbeul
, L.
, and Pettavino
, A.
, 2005
, “Homogeneous Steel Infiltration
,” Metall. Mater. Trans. A
, 36
(10
), pp. 2815
–2827
. 10.1007/s11661-005-0278-x76.
Lorenz
, A.
, Sachs
, E.
, Kernan
, B.
, Posco
, S. A.
, and Rafflenbful
, L.
, 2004
, “Densification of a Powder-Metal Skeleton by Transient Liquid-Phase Infiltration
,” Metall. Mater. Trans. A
, 35
(2
), pp. 631
–640
. 10.1007/s11661-004-0375-277.
Lorenz
, A. M.
, 2002
, “Transient Liquid-Phase Infiltration of a Powder-Metal Skeleton
,” Ph.D. dissertation
, Massachusetts Institute of Technology
, Cambridge, MA
.78.
Bailey
, A.
, Merriman
, A.
, Elliott
, A.
, and Basti
, M.
, 2016
, “Preliminary Testing of Nanoparticle Effectiveness in Binder Jetting Applications
,” 27th Annual International Solid Freeform Fabrication Symposium
, Austin, TX
, pp. 1069
–1077
.79.
Chen
, H.
, 2016
, “A Process Modelling and Parameters Optimization and Recommendation System for Binder Jetting Additive Manufacturing Process
,” Ph.D. dissertation
, McGill University
.80.
Chen
, H.
, and Zhao
, Y. F.
, 2016
, “Process Parameters Optimization for Improving Surface Quality and Manufacturing Accuracy of Binder Jetting Additive Manufacturing Process
,” Rapid Prototyping J.
, 22
(3
), pp. 527
–538
. 10.1108/RPJ-11-2014-014981.
Chou
, D.-T.
, Wells
, D.
, Hong
, D.
, Lee
, B.
, Kuhn
, H.
, and Kumta
, P. N.
, 2013
, “Novel Processing of Iron–Manganese Alloy-Based Biomaterials by Inkjet 3-D Printing
,” Acta Biomater.
, 9
(10
), pp. 8593
–8603
. 10.1016/j.actbio.2013.04.01682.
Crane
, N. B.
, Sachs
, E. M.
, and Frank
, A.
, 2004
, “Strengthening Porous Skeletons by Metal Deposition From a Nanoparticle Suspension
,” Ph.D. dissertation
, Massachusetts Institute of Technology
.83.
Dourandish
, M.
, Godlinski
, D.
, and Simchi
, A.
, 2007
, “3D Printing of Biocompatible PM-Materials
,” Mater. Sci. Forum
, pp. 534–536
, 453
–456
. 10.4028/www.scientific.net/MSF.534-536.45384.
Elliott
, A.
, AlSalihi
, S.
, Merriman
, A. L.
, Basti
, M. M.
, and Sciences
, A.
, 2016
, “Infiltration of Nanoparticles Into Porous Binder Jet Printed Parts
,” Am. J. Eng. Appl. Sci.
, 9
(1
), 128
–133
. 10.3844/ajeassp.2016.128.13385.
Frykholm
, R.
, Takeda
, Y.
, Andersson
, B.-G.
, and Carlström
, R.
, 2016
, “Solid State Sintered 3-D Printing Component by Using Inkjet (Binder) Method
,” J. Jpn Soc. Powder Powder Metall.
, 63
(7
), pp. 421
–426
. 10.2497/jjspm.63.42186.
Godlinski
, D.
, Pohl
, H.
, and Morvan
, S.
, 2004
, “Rapid Manufacturing of Dense Stainless Steel Parts by 3D Printing
,” European Congress and Exhibition on Powder Metallurgy, European PM Conference Proceedings
, Vienna, Austria
, Oct. 17–21
, pp. 131
–136
.87.
Hong
, D.
, Chou
, D. T.
, Velikokhatnyi
, O. I.
, Roy
, A.
, Lee
, B.
, Swink
, I.
, Issaev
, I.
, Kuhn
, H. A.
, and Kumta
, P. N.
, 2016
, “Binder-Jetting 3D Printing and Alloy Development of New Biodegradable Fe-Mn-Ca/Mg Alloys
,” Acta Biomater.
, 45
, pp. 375
–386
. 10.1016/j.actbio.2016.08.03288.
Johnston
, S.
, Frame
, D.
, Anderson
, R.
, and Storti
, D.
, 2004
, “Strain Analysis of Initial Stage Sintering of 316L SS Three Dimensionally Printed (3DP™) Components
,” 15th Annual International Solid Freeform Fabrication Symposium
, Austin, TX
, pp. 129
–140
.89.
Michaels
, S.
, Sachs
, E. M.
, and Cima
, M. J.
, 1992
, “Metal Parts Generation by Three Dimensional Printing
,” 1992 International Solid Freeform Fabrication Symposium
, Austin, TX
, pp. 244
–250
.90.
Miyanaji
, H.
, 2018
, “Binder Jetting Additive Manufacturing Process Fundamentals and the Resultant Influences on Part Quality
,” Ph.D. dissertation
, Louisville, Kentucky
.91.
Miyanaji
, H.
, Momenzadeh
, N.
, and Yang
, L.
, 2018
, “Effect of Printing Speed on Quality of Printed Parts in Binder Jetting Process
,” Addit. Manuf.
, 20
, pp. 1
–10
. 10.1016/j.addma.2017.12.00892.
Shrestha
, S.
, and Manogharan
, G.
, 2017
, “Optimization of Binder Jetting Using Taguchi Method
,” JOM
, 69
(3
), pp. 491
–497
. 10.1007/s11837-016-2231-493.
Tang
, Y.
, Zhou
, Y.
, Hoff
, T.
, Garon
, M.
, and Zhao
, Y. F.
, 2016
, “Elastic Modulus of 316 Stainless Steel Lattice Structure Fabricated via Binder Jetting Process
,” Mater. Sci. Technol.
, 32
(7
), pp. 648
–656
. 10.1179/1743284715Y.000000008494.
Techapiesancharoenkij
, R.
, 2004
, “Bimetallic Bars With Local Control of Composition by Three-Dimensional Printing
,” Master thesis, Massachusetts Institute of Technology
, Cambridge, MA
.95.
Verlee
, B.
, Dormal
, T.
, and Lecomte-Beckers
, J.
, 2013
, “Density and Porosity Control of Sintered 316L Stainless Steel Parts Produced by Additive Manufacturing
,” Powder Metall.
, 55
(4
), pp. 260
–267
. 10.1179/0032589912Z.0000000008296.
Wang
, Y.
, and Zhao
, Y. F.
, 2017
, “Investigation of Sintering Shrinkage in Binder Jetting Additive Manufacturing Process
,” Proc. Manuf.
, 10
, pp. 779
–790
. 10.1016/j.promfg.2017.07.07797.
Zhang
, B.
, Zhan
, Z.
, Cao
, Y.
, Gulan
, H.
, Linner
, P.
, Sun
, J.
, Zwick
, T.
, and Zirath
, H.
, 2016
, “Metallic 3-D Printed Antennas for Millimeter- and Submillimeter Wave Applications
,” IEEE Trans. Terahertz Sci. Technol.
, 6
(4
), pp. 592
–600
. 10.1109/TTHZ.2016.256250898.
Zhou
, Y.
, Tang
, Y.
, Hoff
, T.
, Garon
, M.
, and Zhao
, F. Y.
, 2015
, “The Verification of the Mechanical Properties of Binder Jetting Manufactured Parts by Instrumented Indentation Testing
,” Proc. Manuf.
, 1
, pp. 327
–342
. 10.1016/j.promfg.2015.09.03899.
Ziaee
, M.
, Tridas
, E. M.
, and Crane
, N. B.
, 2016
, “Binder-Jet Printing of Fine Stainless Steel Powder With Varied Final Density
,” JOM
, 69
(3
), pp. 592
–596
. 10.1007/s11837-016-2177-6100.
Rishmawi
, I.
, Salarian
, M.
, and Vlasea
, M.
, 2018
, “Binder Jetting Additive Manufacturing of Water-Atomized Iron
,” 29th Annual International Solid Freeform Fabrication Symposium
, Austin, TX
, pp. 160
–170
.101.
Rishmawi
, I.
, Salarian
, M.
, and Vlasea
, M.
, 2018
, “Tailoring Green and Sintered Density of Pure Iron Parts Using Binder Jetting Additive Manufacturing
,” Addit. Manuf.
, 24
, pp. 508
–520
. 10.1016/j.addma.2018.10.015102.
Seluga
, K. J.
, 2001
, “Three Dimensional Printing by Vector Printing of Fine Metal Powders
,” Master thesis, Massachusetts Institute of Technology
, Cambridge, MA
.103.
Yoo
, H. J.
, 1997
, “Reactive Binders for Metal Parts Produced by Three Dimensional Printing
,” Master thesis, Massachusetts Institute of Technology
, Cambridge, MA
.104.
Miyanaji
, H.
, Momenzadeh
, N.
, and Yang
, L.
, 2019
, “Effect of Powder Characteristics on Parts Fabricated via Binder Jetting Process
,” Rapid Prototyping J.
, 25
(2
), pp. 332
–342
. 10.1108/RPJ-03-2018-0069105.
Atre
, S.
, Porter
, J.
, Batchelor
, T.
, Bulger
, K. K. M.
, and Gangopadhya
, P.
, 2016
, “Process Parameter Optimization for Binder Jetting Using 420 Stainless Steel
,” European Congress and Exhibition on Powder Metallurgy, European PM Conference Proceedings
, Shrewsbury, UK
, pp. 1
–6
.106.
ExOne
, “Metal 3D Printing Materials and Binders of ExOne
”, https://www.exone.com/en-US/3d-printing-materials-and-binders/metal-materials-binders, Accessed November 2019.107.
Turker
, M.
, Godlinski
, D.
, and Petzoldt
, F.
, 2008
, “Effect of Production Parameters on the Properties of IN 718 Superalloy by Three-Dimensional Printing
,” Mater. Charact.
, 59
(12
), pp. 1728
–1735
. 10.1016/j.matchar.2008.03.017108.
Mostafaei
, A.
, Stevens
, E. L.
, Hughes
, E. T.
, Biery
, S. D.
, Hilla
, C.
, and Chmielus
, M.
, 2016
, “Powder Bed Binder Jet Printed Alloy 625: Densification, Microstructure and Mechanical Properties
,” Mater. Des.
, 108
, pp. 126
–135
. 10.1016/j.matdes.2016.06.067109.
Mostafaei
, A.
, Neelapu
, S. H. V. R.
, Kisailus
, C.
, Nath
, L. M.
, Jacobs
, T. D. B.
, and Chmielus
, M.
, 2018
, “Characterizing Surface Finish and Fatigue Behavior in Binder-Jet 3D-Printed Nickel-Based Superalloy 625
,” Addit. Manuf.
, 24
, pp. 200
–209
. 10.1016/j.addma.2018.09.012110.
Mostafaei
, A.
, Stevens
, E. L.
, Ference
, J. J.
, Schmidt
, D. E.
, and Chmielus
, M.
, 2018
, “Binder Jetting of a Complex-Shaped Metal Partial Denture Framework
,” Addit. Manuf.
, 21
, pp. 63
–68
. 10.1016/j.addma.2018.02.014111.
Caputo
, M.
, and Solomon
, C.
, 2017
, “A Facile Method for Producing Porous Parts With Complex Geometries From Ferromagnetic Ni-Mn-Ga Shape Memory Alloys
,” Mater. Lett.
, 200
, pp. 87
–89
. 10.1016/j.matlet.2017.04.112112.
Mostafaei
, A.
, Kimes
, K. A.
, Stevens
, E. L.
, Toman
, J.
, Krimer
, Y. L.
, Ullakko
, K.
, and Chmielus
, M.
, 2017
, “Microstructural Evolution and Magnetic Properties of Binder Jet Additive Manufactured Ni-Mn-Ga Magnetic Shape Memory Alloy Foam
,” Acta Mater.
, 131
, pp. 482
–490
. 10.1016/j.actamat.2017.04.010113.
Türker
, M.
, Godlinski
, D.
, Pohl
, H.
, and Petzoldt
, F.
, 2005
, “Rapid Prototyping of Inconel Alloys by Direct Metal Laser Sintering and Three Dimensional Printing
,” European Congress and Exhibition on Powder Metallurgy, European PM Conference Proceedings
, Prague, Czech Republic
, pp. 2
–5
.114.
Kakisawa
, H.
, Minagawa
, K.
, Ida
, K.
, Maekawa
, K.
, and Halada
, K.
, 2005
, “Dense P/M Component Produced by Solid Freeform Fabrication (SFF)
,” Mater. Trans.
, 46
(12
), pp. 2574
–2581
. 10.2320/matertrans.46.2574115.
Elliott
, A. M.
, Nandwana
, P.
, Siddel
, D. H.
, and Compton
, B.
, 2016
, A Method for Measuring Powder bed Density in Binder jet Additive Manufacturing Process and the Powder Feedstock Characteristics Influencing the Powder bed Density
, Oak Ridge National Lab.(ORNL)
, Oak Ridge, TN
.116.
Mostafaei
, A.
, Rodriguez De Vecchis
, P.
, Stevens
, E. L.
, and Chmielus
, M.
, 2018
, “Sintering Regimes and Resulting Microstructure and Properties of Binder jet 3D Printed Ni-Mn-Ga Magnetic Shape Memory Alloys
,” Acta Mater.
, 154
, pp. 355
–364
. 10.1016/j.actamat.2018.05.047117.
Basalah
, A.
, Shanjani
, Y.
, Esmaeili
, S.
, and Toyserkani
, E.
, 2012
, “Characterizations of Additive Manufactured Porous Titanium Implants
,” J. Biomed. Mater. Res. Part B: Appl. Biomater.
, 100
(7
), pp. 1970
–1979
. 10.1002/jbm.b.32764118.
Stevens
, E.
, Schloder
, S.
, Bono
, E.
, Schmidt
, D.
, and Chmielus
, M.
, 2018
, “Density Variation in Binder Jetting 3D-Printed and Sintered Ti-6Al-4V
,” Addit. Manuf.
, 22
, pp. 746
–752
. 10.1016/j.addma.2018.06.017119.
Sheydaeian
, E.
, and Toyserkani
, E.
, 2017
, “A System for Selectively Encapsulating Porogens Inside the Layers During Additive Manufacturing: From Conceptual Design to the First Prototype
,” J. Manuf. Processes
, 26
, pp. 330
–338
. 10.1016/j.jmapro.2017.03.001120.
Sheydaeian
, E.
, Sarikhani
, K.
, Chen
, P.
, and Toyserkani
, E.
, 2017
, “Material Process Development for the Fabrication of Heterogeneous Titanium Structures With Selective Pore Morphology by a Hybrid Additive Manufacturing Process
,” Mater. Des.
, 135
, pp. 142
–150
. 10.1016/j.matdes.2017.09.025121.
Sheydaeian
, E.
, and Toyserkani
, E.
, 2018
, “Additive Manufacturing Functionally Graded Titanium Structures With Selective Closed Cell Layout and Controlled Morphology
,” Int. J. Adv. Manuf. Technol.
, 96
(9–12
), pp. 3459
–3469
. 10.1007/s00170-018-1815-2122.
Wheat
, E.
, 2018
, “Process Mapping and Optimization of Titanium Parts Made by Binder Jetting Additive Manufacturing
,” Ph.D. dissertation
, University of Waterloo
, Waterloo, ON
.123.
Lu
, K.
, and Reynolds
, W. T.
, 2008
, “3DP Process for Fine Mesh Structure Printing
,” Powder Technol.
, 187
(1
), pp. 11
–18
. 10.1016/j.powtec.2007.12.017124.
Bai
, Y.
, and Williams
, C. B.
, 2018
, “The Effect of Inkjetted Nanoparticles on Metal Part Properties in Binder Jetting Additive Manufacturing
,” Nanotechnology
, 29
(39
), p. 395706
. 10.1088/1361-6528/aad0bb125.
Meeder
, M. P.
, 2016
, “Modeling the Thermal and Electrical Properties of Different Density Sintered Binder Jetted Copper for Verification and Revision of the Wiedemann-Franz law
,” Master thesis, Virginia Tech
.126.
Bai
, Y.
, Wall
, C.
, Pham
, H.
, Esker
, A.
, and Williams
, C. B.
, 2018
, “Characterizing Binder–Powder Interaction in Binder Jetting Additive Manufacturing Via Sessile Drop Goniometry
,” ASME J. Manuf. Sci. Eng.
, 141
(1
), p. 011005
. 10.1115/1.4041624127.
Bai
, Y.
, and Williams
, C. B.
, 2018
, “Binder Jetting Additive Manufacturing With a Particle-Free Metal Ink as a Binder Precursor
,” Mater. Des.
, 147
, pp. 146
–156
. 10.1016/j.matdes.2018.03.027128.
Bai
, J. G.
, Creehan
, K. D.
, and Kuhn
, H. A
, 2007
, “Inkjet Printable Nanosilver Suspensions for Enhanced Sintering Quality in Rapid Manufacturing
,” Nanotechnology
, 18
(18
), p. 185701
. 10.1088/0957-4484/18/18/185701129.
Snelling
, D.
, Li
, Q.
, Meisel
, N.
, Williams
, C. B.
, Batra
, R. C.
, and Druschitz
, A. P.
, 2015
, “Lightweight Metal Cellular Structures Fabricated via 3D Printing of Sand Cast Molds
,” Adv. Eng. Mater.
, 17
(7
), pp. 923
–932
. 10.1002/adem.201400524130.
Enrique
, P. D.
, Mahmoodkhani
, Y.
, Marzbanrad
, E.
, Toyserkani
, E.
, and Zhou
, N. Y.
, 2018
, “In Situ Formation of Metal Matrix Composites Using Binder Jet Additive Manufacturing (3D Printing)
,” Mater. Lett.
, 232
, pp. 179
–182
. 10.1016/j.matlet.2018.08.117131.
Rambo
, C. R.
, Travitzky
, N.
, Zimmermann
, K.
, and Greil
, P.
, 2005
, “Synthesis of TiC/Ti–Cu Composites by Pressureless Reactive Infiltration of TiCu Alloy Into Carbon Preforms Fabricated by 3D-Printing
,” Mater. Lett.
, 59
(8–9
), pp. 1028
–1031
. 10.1016/j.matlet.2004.11.051132.
Sheydaeian
, E.
, and Toyserkani
, E.
, 2018
, “A New Approach for Fabrication of Titanium-Titanium Boride Periodic Composite via Additive Manufacturing and Pressure-Less Sintering
,” Compos. Part B: Eng.
, 138
, pp. 140
–148
. 10.1016/j.compositesb.2017.11.035133.
Snelling
, D. A.
, Williams
, C. B.
, Suchicital
, C. T. A.
, and Druschitz
, A. P.
, 2017
, “Binder Jetting Advanced Ceramics for Metal-Ceramic Composite Structures
,” Int. J. Adv. Manuf. Technol.
, 92
(1–4
), pp. 531
–545
. 10.1007/s00170-017-0139-y134.
Stoyanov
, P.
, Andre
, K.
, Prichard
, P.
, Yao
, M.
, and Gey
, C.
, 2016
, “Microstructural and Mechanical Characterization of Mo-Containing Stellite Alloys Produced by Three Dimensional Printing
,” Proc. CIRP
, 45
, pp. 167
–170
. 10.1016/j.procir.2016.02.358135.
Dilip
, J. J. S.
, Miyanaji
, H.
, Lassell
, A.
, Starr
, T. L.
, and Stucker
, B.
, 2017
, “A Novel Method to Fabricate TiAl Intermetallic Alloy 3D Parts Using Additive Manufacturing
,” Def. Technol.
, 13
(2
), pp. 72
–76
. 10.1016/j.dt.2016.08.001136.
Yin
, X.
, Travitzky
, N.
, Melcher
, R.
, and Greil
, P.
, 2006
, “Three-Dimensional Printing of TiAl3/Al2O3 Composites
,” Zeitschrift für Metallkunde
, 97
(5
), pp. 492
–498
. 10.3139/146.101263137.
Levy
, A.
, Miriyev
, A.
, Elliott
, A.
, Babu
, S. S.
, and Frage
, N.
, 2017
, “Additive Manufacturing of Complex-Shaped Graded TiC/Steel Composites
,” Mater. Des.
, 118
, pp. 198
–203
. 10.1016/j.matdes.2017.01.024138.
Uduwage
, D. S. D.
, 2015
, “Binder Jet Additive Manufacturing of Stainless Steel-Hydroxyapatite Bio-Composite
,” Master thesis, Minnesota State University
.139.
Cramer
, C. L.
, Nandwana
, P.
, Lowden
, R. A.
, and Elliott
, A. M.
, 2019
, “Infiltration Studies of Additive Manufacture of WC with Co Using Binder Jetting and Pressureless Melt Method
,” Additive Manufacturing
, 28
, pp. 333
–343
. 10.1016/j.addma.2019.04.009140.
Rodriguez
, P.
, Mostafaei
, A.
, and Chmielus
, M.
, 2018
, “Binder Jet Additive Manufacturing of Dental Material From Cobalt-Chrome Alloy
,” Highlighting Undergraduate Research at the University of Pittsburgh Swanson School of Engineering
, p. 63
.141.
Ibrahim
, I.
, Mohamed
, F.
, and Lavernia
, E.
, 1991
, “Particulate Reinforced Metal Matrix Composites—a Review
,” J. Mater. Sci.
, 26
(5
), pp. 1137
–1156
. 10.1007/BF00544448142.
Kaczmar
, J.
, Pietrzak
, K.
, and Włosiński
, W.
, 2000
, “The Production and Application of Metal Matrix Composite Materials
,” J. Mater. Process. Technol.
, 106
(1–3
), pp. 58
–67
. 10.1016/S0924-0136(00)00639-7143.
ASTM International
, 2014
, “F3049-14: Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes
,” ASTM International, West Conshohocken, PA
.144.
ASTM International
, 2020
, “B213-20: Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
,” ASTM International, West Conshohocken, PA
.145.
ASTM International
, 2016
, “B964-16: Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
,” ASTM International, West Conshohocken, PA
.146.
Grey
, R.
, and Beddow
, J.
, 1969
, “On the Hausner Ratio and its Relationship to Some Properties of Metal Powders
,” Powder Technol.
, 2
(6
), pp. 323
–326
. 10.1016/0032-5910(69)80024-0147.
Gu
, D.
, Xia
, M.
, and Dai
, D.
, 2019
, “On the Role of Powder Flow Behavior in Fluid Thermodynamics and Laser Processability of Ni-Based Composites by Selective Laser Melting
,” Int. J. Mach. Tools Manuf.
, 137
, pp. 67
–78
. 10.1016/j.ijmachtools.2018.10.006148.
ExOne
, “ExOne Innovent+®
”, https://www.exone.com/en-US/3D-printing-systems/metal-3d-printers/Innovent, Accessed January 2020.149.
Haeri
, S.
, Wang
, Y.
, Ghita
, O.
, and Sun
, J.
, 2017
, “Discrete Element Simulation and Experimental Study of Powder Spreading Process in Additive Manufacturing
,” Powder Technol.
, 306
, pp. 45
–54
. 10.1016/j.powtec.2016.11.002150.
Schade
, C. T.
, Murphy
, T. F.
, and Walton
, C.
, 2014
, “Development of Atomized Powders for Additive Manufacturing
,” Powder Metallurgy Word Congress
, Orlando, FL
, May 18–22
151.
Cima
, M.
, Lauder
, A.
, Khanuja
, S.
, and Sachs
, E.
, 1992
, “Microstructural Elements of Components Derived From 3D Printing
,” 1992 International Solid Freeform Fabrication Symposium
, Austin, TX
, pp. 220
–227
.152.
Meier
, C.
, Weissbach
, R.
, Weinberg
, J.
, Wall
, W. A.
, and Hart
, A. J.
, 2019
, “Critical Influences of Particle Size and Adhesion on the Powder Layer Uniformity in Metal Additive Manufacturing
,” J. Mater. Process. Technol.
, 266
, pp. 484
–501
. 10.1016/j.jmatprotec.2018.10.037153.
Miyanaji
, H.
, Zhang
, S.
, and Yang
, L.
, 2018
, “A New Physics-Based Model for Equilibrium Saturation Determination in Binder Jetting Additive Manufacturing Process
,” Int. J. Mach. Tools Manuf.
, 124
, pp. 1
–11
. 10.1016/j.ijmachtools.2017.09.001154.
Pollock
, T. M.
, and Tin
, S. J.
, 2006
, “Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties
,” J. Propul. Power
, 22
(2
), pp. 361
–374
. 10.2514/1.18239155.
Budding
, A.
, and Vaneker
, T. H. J.
, 2013
, “New Strategies for Powder Compaction in Powder-Based Rapid Prototyping Techniques
,” Proc. CIRP
, 6
, pp. 527
–532
. 10.1016/j.procir.2013.03.100156.
Shanjani
, Y.
, and Toyserkani
, E.
, 2008
, “Material Spreading and Compaction in Powder-Based Solid Freeform Fabrication Methods: Mathematical Modeling
,” 19th Annual International Solid Freeform Fabrication Symposium
, Austin, TX
, pp. 399
–410
.157.
Chen
, H.
, Wei
, Q.
, Wen
, S.
, Li
, Z.
, and Shi
, Y.
, 2017
, “Flow Behavior of Powder Particles in Layering Process of Selective Laser Melting: Numerical Modeling and Experimental Verification Based on Discrete Element Method
,” Int. J. Mach. Tools Manuf.
, 123
, pp. 146
–159
. 10.1016/j.ijmachtools.2017.08.004158.
Lee
, S.-J.
, Sachs
, E.
, and Cima
, M.
, 1995
, “Layer Position Accuracy in Powder-Based Rapid Prototyping
,” Rapid Prototyping J.
, 1
(4
), pp. 24
–37
. 10.1108/13552549510104447159.
Gale
, W. F.
, and Totemeier
, T. C.
, 2003
, Smithells Metals Reference Book
, Elsevier
, New York
.160.
Digital Metal
, “DIGITAL METAL®Materials for 3D Printing
”, https://digitalmetal.tech/materials/, Accessed May 2020.161.
162.
Gruppo Lucefin
, 2012
, “Precipitation Hardening Stainless Steel Technical Card
”, http://www.lucefin.com/wp-content/files_mf/1.4542pha63062.pdf.163.
ASM Aerospace Specification Metals Inc.
, “ASM AISI Type 304 Stainless Steel
”, http://asm.matweb.com/search/SpecificMaterial.asp?bassnum=mq304a, Accessed January 2020.164.
ASTM International
, 2019
, “A240/A240M-19: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Stripe for Pressure Vessels and for General Application
,” ASTM International, West Conshohocken, PA
.165.
AZO Materials
, “Nickel-Based Super Alloy Inconel 625 - Properties and Applications by United Performance Alloys
,” https://www.azom.com/article.aspx?ArticleID=4461#:~:text=Properties%20of%20Nickel%20Alloy%20Inconel,cryogenic%20to%202000%C2%B0F., Accessed January 2020.166.
Sandmeyer Steel Company
, “Alloy 17-4PH
”, https://www.sandmeyersteel.com/17-4PH.html, Accessed January 2020.167.
Haeri
, S.
, 2017
, “Optimisation of Blade Type Spreaders for Powder Bed Preparation in Additive Manufacturing Using DEM Simulations
,” Powder Technol.
, 321
, pp. 94
–104
. 10.1016/j.powtec.2017.08.011168.
Lee
, Y. S.
, Nandwana
, P.
, and Zhang
, W.
, 2018
, “Dynamic Simulation of Powder Packing Structure for Powder Bed Additive Manufacturing
,” Int. J. Adv. Manuf. Technol.
, 96
(1–4
), pp. 1507
–1520
. 10.1007/s00170-018-1697-3169.
Bai
, Y.
, Wagner
, G.
, and Williams
, C. B.
, 2017
, “Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals
,” ASME J. Manuf. Sci. Eng.
, 139
(8
), p. 081019
. 10.1115/1.4036640170.
Shishkovsky
, Igor
, 2016
, “Additive Manufacturing of Casting Tools Using Powder-Binder- Jetting Technology,” New Trends in 3D Printing
, D.
Günther
, and F.
Mögele
, eds., IntechOpen
, London, UK
, pp. 53
–86
.171.
Yarin
, A. L.
, 2006
, “Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing…
,” Annu. Rev. Fluid Mech.
, 38
(1
), pp. 159
–192
. 10.1146/annurev.fluid.38.050304.092144172.
Parab
, N. D.
, Barnes
, J. E.
, Zhao
, C.
, Cunningham
, R. W.
, Fezzaa
, K.
, Rollett
, A. D.
, and Sun
, T.
, 2019
, “Real Time Observation of Binder Jetting Printing Process Using High-Speed X-ray Imaging
,” Sci. Rep.
, 9
(1
), p. 2499
. 10.1038/s41598-019-38862-7Copyright © 2020 by ASME
You do not currently have access to this content.
