Abstract
Additive manufacturing (AM) is a set of manufacturing processes that are capable of producing complex parts directly from a computer model of the part. This review provides a history of the early antecedents of these processes. In addition, the different classes of AM processes and their commercialization are presented and discussed along with their fields of use. This paper emphasizes AM processes that produce production quality parts. The review also addresses design issues and the commercial state of the art for production of polymer, metal, and ceramic parts. A main emphasis of this paper is the development and motivations for AM especially during its nascent years. The paper is written for the general readership of manufacturing professionals and researchers.
Issue Section:
100th Anniversary Special Issue
References
1.
Wong
, K.
, and Hernandez
, A.
, 2012
, “A Review of Additive Manufacturing
,” International Scholarly Research Notices
.2.
Huang
, S.
, Liu
, P.
, Mokasdar
, A.
, and Hou
, L.
, “Additive Manufacturing and Its Societal Impact: A Literature Review
,” Int. J. Adv. Manuf. Technol.
, 67
(5–8
), pp. 1191
–1203
. 10.1007/s00170-012-4558-53.
Bikas
, H.
, Stavropoulos
, P.
, and Chryssolouris
, G.
, 2016
, “Additive Manufacturing Methods and Modelling Approaches: A Critical Review
,” Int. J. Adv. Manuf. Technol.
, 83
(1–4
), pp. 389
–405
. 10.1007/s00170-015-7576-24.
Bourell
, D.
, and Wohlers
, T.
, 2020
, “Introduction to Additive Manufacturing,” Additive Manufacturing
, Vol. 24
, ASM
, Materials Park, OH
.5.
Ngo
, T. D.
, Kashani
, A.
, Imbalzano
, G.
, Nguyen
, K.
, and Hui
, D.
, 2018
, “Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges
,” Compos. Part B
, 143
, pp. 172
–196
. 10.1016/j.compositesb.2018.02.0126.
Xibing
, G.
, Anderson
, T.
, and Chou
, K.
, 2012
, “Review on Powder-Based Electron Beam Additive Manufacturing Technology
,” Proceedings of the ASME/ISCIE 2012 International Symposium on Flexible Automation
, St. Louis, MO
, June 18–20
.7.
Schmidt
, M.
, Merklein
, M.
, Bourell
, D.
, Dimitrov
, D.
, Hausotte
, T.
, Wegener
, K.
, Overmeyer
, L.
, Vollertsen
, F.
, and Levy
, G.
, 2017
, “Laser Based Additive Manufacturing in Industry and Academia
,” CIRP Ann.
, 66
(2
), pp. 561
–583
. 10.1016/j.cirp.2017.05.0118.
Leach
, R.
, Bourell
, D.
, Carmignato
, S.
, Donmez
, A.
, Senin
, N.
, and Dewulf
, W.
, 2019
, “Geometrical Metrology for Metal Additive Manufacturing
,” CIRP Ann.
, 68
(2
), pp. 677
–700
. 10.1016/j.cirp.2019.05.0049.
Bourell
, D.
, Kruth
, J.
, Leu
, M.
, Levy
, G.
, Rosen
, D.
, Beese
, A.
, and Clare
, A.
, 2017
, “Materials for Additive Manufacturing
,” CIRP Ann.
, 2
(66
), pp. 657
–80
. 10.1016/j.cirp.2017.05.00910.
Singh
, S.
, Ramakrishna
, S.
, and Singh
, R.
, 2017
, “Material Issues in Additive Manufacturing: A Review
,” J. Manuf. Process.
, 25
, pp. 185
–200
. 10.1016/j.jmapro.2016.11.00611.
Li
, N.
, Huang
, S.
, Zhang
, G.
, Qin
, R.
, Liu
, W.
, Xiong
, H.
, Shi
, G.
, and Blackburn
, J.
, 2019
, “Progress in Additive Manufacturing on new Materials: A Review
,” J. Mater. Sci. Technol.
, 35
(2
), pp. 242
–269
. 10.1016/j.jmst.2018.09.00212.
Frazier
, W.
, 2014
, “Metal Additive Manufacturing: A Review
,” J. Mater. Eng. Perform.
, 23
(6
), pp. 1917
–1928
. 10.1007/s11665-014-0958-z13.
Lewandowski
, J.
, and Seifi
, M.
, 2016
, “Metal Additive Manufacturing: A Review of Mechanical Properties
,” Annu. Rev. Mater. Res.
, 46
(1
), pp. 151
–186
. 10.1146/annurev-matsci-070115-03202414.
Gorsse
, S.
, Hutchinson
, C.
, Gouné
, M.
, and Banerjee
, R.
, 2017
, “Additive Manufacturing of Metals: A Brief Review of the Characteristic Microstructures and Properties of Steels, Ti-6Al-4V and High-Entropy Alloys
,” Sci. Technol. Adv. Mater.
, 18
(1
), pp. 584
–610
. 10.1080/14686996.2017.136130515.
Deckers
, J.
, Vleugels
, J.
, and Kruth
, J.
, 2014
, “Additive Manufacturing of Ceramics: A Review
,” J. Ceram. Sci. Technol.
, pp. 245
–260
.16.
Ferraris
, E.
, Vleugels
, J.
, Guo
, Y.
, Bourell
, D.
, Kruth
, J.
, and Lauwers
, B.
, 2016
, “Shaping of Engineering Ceramics by Electro, Chemical and Physical Processes
,” CIRP Ann.
, 65
(2
), pp. 761
–784
. 10.1016/j.cirp.2016.06.00117.
ASTM
, 2009
, Standard F2792-09, Standard Terminology for Additive Manufacturing Technologies, Superseded
, 2009
.18.
ASTM
, 2012
, Standard F2792-12, Standard Terminology for Additive Manufacturing Technologies, Withdrawn
.19.
Gibson
, I.
, and Savalani
, M.
, 2006
, “Rapid Manufacture and GARPA
,” Rapid Prototyp. J.
, 12
(3
). 10.1108/rpj.2006.15612cab.00120.
Beaman
, J.
, Barlow
, J.
, Bourell
, D.
, Crawford
, R.
, Marcus
, H.
, and McAlea
, K.
, 1997
, Solid Freeform Fabrication: A New Direction in Manufacturing
, Kluwer Academic Publishers
, Norwell, MA
.21.
Blanther
, E.
, 1892
, “Manufacture of Contour Relief Maps
,” U.S. Patent 473,901
.22.
Perera
, B.
, 1940
, “Process for Making Relief Maps
,” U.S. Patent 2,189,592
.23.
Concordet
, N.
, 1951
, “Three-dimensional Exhibit
,” U.S. Patent 2,556,798
.24.
Zang
, E.
, 1964
, “Vitavue Relief Model Technique
,” U.S. Patent 3,137,080
.25.
Gaskin
, T.
, 1973
, “Earth Science Teaching Device
,” U.S. Patent 3,751,827
.26.
Bogart
, M.
, 1979
, “In the Art the End Don't Always Justify Means
,” Smithsonian
, pp. 104
–110
.27.
Willeme
, F.
, 1864
, “Photo-sculpture
,” U.S. Patent 43,822
.28.
Swainson
, W. K.
, 1977
, “Method, Medium and Apparatus for Producing Three-dimensional Figure Product
,” U.S. Patent 4,041,476
.29.
Schwerzel
, R. E.
, Wood
, V. E.
, McGinniss
, V. D.
, and Verber
, C. M.
, 1984
, “Three-dimensional Photochemical Machining With Lasers
,” Appl of Lasers to Ind Chem
, pp. 90
–97
.30.
Baker
, R.
, 1925
, “Method of Making Decorative Articles
,” U.S. Patent 1,533,300
.31.
Lindgren
, N.
, 1967
, “Method of Manufacturing Electric Motors
,” U.S. Patent 3,348,300
.32.
Foote
, D.
, 1970
, “Art of Interlocking Plate Assembly for Laminated Padlock Bodies
,” U.S. Patent 3,548,486
.33.
DiMatteo
, P.
, 1976
, “Method of Generating and Constructing Three-dimensional Bodies
,” U.S. Patent 3,932,923
.34.
Yokoi
, H.
, Suzuki
, T.
, and Nakagawa
, T.
, 1984
, “Manufacturing of Blanking Tool and Its Die Set by Laminating Laser-cut Steel Sheets
,” SME 12th NAMRC Proceedings
, Houghton, MI
.35.
Ciraud
, L.
, 1971
, “Method and Device for Producing Any Objects From Any Meltable Material
,” EUR Patent DE 22 63 777 A1
.36.
Garver
, T.
, 1961
, “Method of Producing Metal Rollers
,” U.S. Patent 3,007,231
.37.
White
, W.
, 1964
, “Pressure Roller and Method of Manufacture
,” U.S. Patent 3,156,968
.38.
Ujiie
, A.
, 1972
, “Method of Constructing Substantially Circular Cross-section Vessel by Welding
,” U.S. Patent 3,665,143
.39.
Brandi
, H.
, and Luckow
, H.
, 1976
, “Method of Making Large Structural One-Piece Parts of Metal, Particularly One-Piece Shafts
,” U.S. Patent 3,985,995
.40.
Gale
, P.
, and Fair
, J.
, 1978
, “Method of Making Aluminum Piston With Reinforced Piston Ring Groove
,” U.S. Patent 4,125,926
.41.
Brown
, C.
, Breinan
, E.
, and Kear
, B.
, 1982
, “Method for Fabricating Articles by Sequential Layer Deposition
,” U.S. Patent 4,323756
.42.
Bronowski
, H.
, 1986
, “Device for Building up a Workpiece by Deposit Welding
,” U.S. Patent 4,621,762
.43.
Hull
, C.
, 1986
, “Apparatus for Production of Three-dimensional Objects by Stereolithography
,” U.S. Patent 4,575,330
.44.
Jacobs
, P.
, 1992
, Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography
, SME
, Dearborn, MI
.45.
Crump
, S.
, 1992
, “Apparatus and Method for Creating Three-dimensional Objects
,” U.S. Patent 5,121,329
.46.
Feygin
, M.
, 1988
, “Apparatus and Method for Forming an Integral Object From Laminations
,” U.S. Patent 4,752,352
.47.
Deckard
, C.
, 1989
, “Method and Apparatus for Producing Parts by Selective Sintering
,” U.S. Patent 4,863,538
.48.
Sanders
, R.
, 1996
, “3-D Model Maker
,” U.S. Patent 5,506,607
.49.
Helenski
, R.
, 1992
, “Method and Means for Constructing Three-dimensional Articles by Particle Deposition
,” U.S. Patent 5,136,515
.50.
Sachs
, E.
, Haggerty
, J.
, and Michael Cima
, P. W.
, 1993
, “Three-dimensional Printing Techniques
,” U.S. Patent 5,204,055
.51.
Breinan
, E.
, and Kear
, R.
, 1983
, “Rapid Solidification Laser Processing at High Power Density,” Laser Materials Processing
, M.
Bass
, ed., Elsevier, North-Holland
, pp. 237
–295
.52.
Baheti
, R.
, Haefner
, K.
, and Sweet
, L.
, 1984
, Operational Performance of Vision-Based arc Welding Robot Control System,” Sensors and Control for Automated Manufacturing and Robotics
, K.
Stelson
, and L.
Sweet
, eds., ASME
, pp. 93
–106
.53.
Prinz
, F.
, Mertz
, R.
, Ramaswami
, F.
, Terk
, K.
, and Weiss
, L.
, 1994
, “Shape Deposition Manufacturing
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.54.
Kobryn
, P.
, Ontko
, N.
, Perkins
, L.
, and Yiley
, J.
, 2006
, “Additive Manufacturing of Aerospace Alloys for Aircraft Structures
,” Cost Effective Manufacture via Net-Shape Processing
, Neuilly-sur-Seine, France
.55.
Griffith
, M.
, Keicher
, D.
, Atwood
, C.
, Romero
, J.
, Smugersky
, J.
, Harwell
, L.
, and Greene
, D.
, 1996
, “Freeform Fabrication of Metallic Components Using Laser net Shaping (LENS)
,” Solid Freeform Fabrication Conference
, University of Texas at Austin
.56.
Wohlers
, T.
, 2019
, “Wohlers Reports 2019: 3D Printing and Additive Manufacturing State of the Industry
,” Wohlers Associates, Fort Collins, CO
.57.
Kruth
, J.
, Leu
, M.
, and Nakagawa
, T.
, 1998
, “Progress in Additive Manufacturing and Rapid Prototyping
,” CIRP Ann.
, 47
(2
), pp. 525
–540
. 10.1016/S0007-8506(07)63240-558.
Dehoff
, R.
, Duty
, C.
, Peter
, W.
, Yamamoto
, Y.
, Chen
, W.
, Blue
, C.
, and Taliman
, C.
, 2013
, “Case Study: Additive Manufacturing of Aerospace Brackets
,” Adv. Mater. Process.
, pp. 19
–22
.59.
Weiss
, L.
, Merz
, R.
, Prinz
, F.
, Neplotnik
, G.
, Padamanabhan
, P.
, Schultz
, L.
, and Ramaswami
, K.
, 1997
, “Shape Depoosition Manufacturing of Heterogeneous Structures
,” J. Manuf. Syst.
, 16
(4
), pp. 239
–248
. 10.1016/S0278-6125(97)89095-460.
Fessler
, J.
, Nickel
, A.
, Link
, G.
, and Prinz
, F.
, 1997
, “Functional Gradient Metallic Prototypes Through Shape Deposition Manufacturing
,” Solid Freeform Fabrication Symposium
, Austin, TX
.61.
Jepson
, L.
, Beaman
, J.
, Bourell
, D.
, and Wood
, K.
, 1997
, “SLS Processing of Functionally Gradient Materials
,” Solid Freeform Fabrication Symposium
, Austin, TX
.62.
Vaezi
, M.
, Chianrabutra
, S.
, Mellor
, B.
, and Yang
, S.
, 2013
, “Multiple Material Additive Manufacturing—Part 1: A Review
,” Virtual Phys. Prototyp.
, 8
(1
), pp. 19
–50
. 10.1080/17452759.2013.77817563.
Hopkinson
, N.
, and Dickens
, P.
, 2003
, “Analysis of Rapid Manufacturing—Using Layer Manufacturing Processes for Production
,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Science
, Vol. 217
, No. C1
, pp. 31
–39
.64.
Anderson
, C.
, 2006
, The Long Tail
, Hyperion
, New York
.65.
Cochran
, J.
, Lee
, K.
, McDowell
, D.
, and Sanders
, T.
, 2002
, “Multifunctional Metallic Honeycombs by Thermal Chemical Processing
,” Processing and Properties of Lightweight Cellular Materials and Structures
.66.
Hayes
, A.
, Wang
, A.
, Dempsey
, B.
, and McDowell
, D.
, 2004
, “Mechanics of Linear Cellular Alloys
,” Mech. Mater.
, 36
(8
), pp. 691
–713
. 10.1016/j.mechmat.2003.06.00167.
Gibson
, L.
, and Ashby
, M.
, 1999
, Cellular Solids: Structure and Properties
, Cambridge University Press
, Cambridge, UK
.68.
Seepersad
, C.
, Conner
, C.
, Allen
, J.
, McDowell
, D.
, and Mistree
, F.
, 2006
, “Robust Design of Cellular Materials With Topological and Dimensional Imperfections
,” ASME J. Mech. Des.
, 128
(6
), pp. 1285
–1297
. 10.1115/1.233857569.
Nguyen
, J.
, Park
, S.
, and Rosen
, D.
, 2013
, “Heuristic Optimization Method for Cellular Structure Design of Light Weight Components
,” Int. J. Precis. Eng. Manuf.
, 14
(6
), pp. 1071
–1078
. 10.1007/s12541-013-0144-570.
Tamburrino
, F.
, Graziosi
, S.
, and Bordegoni
, M.
, 2018
, “The Design Process of Additively Manufactured Mesoscale Lattice Structures: A Review
,” ASME J. Comput. Inf. Sci. Eng.
, 18
(4
), p. 040801
. 10.1115/1.404013171.
Dong
, G.
, Tang
, Y.
, and Zhao
, Y.
, 2017
, “A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
,” ASME J. Mech. Des.
, 138
(10
), p. 100906
. 10.1115/1.403730572.
Zheng
, X.
, Lee
, H.
, Weisgraber
, T.
, Shusteff
, M.
, DeOtte
, J.
, Duoss
, E.
, Kuntz
, J.
, Biener
, M.
, Ge
, Q.
, Jackson
, J.
, Kucheyev
, S.
, Fang
, N.
, and Spadaccini
, C.
, 2014
, “Ultralight, Ultrastiff Mechanical Metamaterials
,” Science
, 344
(6190
), pp. 1373
–1377
. 10.1126/science.125229173.
Aremu
, A.
, Brennan-Craddock
, J.
, Panesar
, A.
, Ashcroft
, I.
, Hague
, R.
, Wildman
, R.
, and Tuck
, C.
, 2017
, “A Voxel-Based Method of Constructing and Skinning Conformal and Functionally Graded Lattice Structures Suitable for Additive Manufacturing
,” Addit. Manuf.
, 13
, pp. 1
–13
. 10.1016/j.addma.2016.10.00674.
Nguyen
, J.
, Park
, S.
, Rosen
, D.
, Folgar
, L.
, and Williams
, J.
, 2012
, “Conformal Lattice Structure Design and Fabrication
,” Solid Freeform Fabrication Symposium
, Austin, TX
.75.
Maheshwara
, U. B. D.
, and Seepersad
, C.
, 2007
, “Design and Freeform Fabrication of Deployable Structures With Lattice Skins
,” Rapid Prototyp. J.
, 13
(4
), pp. 213
–225
. 10.1108/1355254071077616076.
Maloney
, K.
, Fink
, K.
, Schaedler
, T.
, Kolodziejska
, J.
, Jacobsen
, A.
, and Roper
, C.
, 2012
, “Multifunctional Heat Exchangers Derived From Three-Dimensional Micro-Lattice Structures
,” Int. J. Heat Mass Transfer
, 55
(9–10
), pp. 2486
–2493
. 10.1016/j.ijheatmasstransfer.2012.01.01177.
Seepersad
, C.
, Dempsey
, B.
, Allen
, J.
, Mistree
, F.
, and McDowell
, D.
, 2004
, “Design of Multifunctional Honeycomb Materials
,” AIAA J.
, 42
(5
), pp. 1025
–1033
. 10.2514/1.959478.
Wang
, X.
, Xu
, S.
, Zhou
, S.
, Xu
, W.
, Leary
, M.
, Choong
, P.
, Qian
, M.
, Brandt
, M.
, and Xie
, Y.
, 2016
, “Topological Design and Additive Manufacturing of Porous Metals for Bone Scaffolds and Orthopaedic Implants
,” Biomaterials
, 83
, pp. 127
–141
. 10.1016/j.biomaterials.2016.01.01279.
Gibson
, I.
, Rosen
, D.
, and Stucker
, B.
, 2010
, “Design for Additive Manufacturing,” Additive Manufacturing Technologies
, Springer
, Boston
, pp. 299
–332
.80.
Vendra
, L.
, and Achanta
, A.
, 2018
, “Metal Additive Manufacturing in the Oil and Gas Industry
,” Solid Freeform Fabrication Symposium
, Austin, TX
.81.
Rannar
, L.-E.
, Glad
, A.
, and Gustafson
, C.-G.
, 2007
, “Efficient Cooling With Tool Inserts Manufactured by Electron Beam Melting
,” Rapid Prototyp. J.
, 13
(3
), pp. 128
–135
. 10.1108/1355254071075087082.
Faustini
, M.
, Crawford
, R.
, Neptune
, R.
, Rogers
, W.
, Gitter
, A.
, and Bosker
, G.
, 2003
, “Design and Analysis of Orthogonally Compliant Features for Duraform/SS Manufactured Plates
,” Solid Freeform Fabrication Symposium
, Austin, TX
.83.
Gilmore
, J.
, and Pine
, B.
, 1997
, “The Four Faces of Mass Customization
,” Harv. Bus. Rev.
, 75
(1
), pp. 91
–102
.84.
Conner
, B.
, Manogharan
, G.
, Martof
, A.
, Rodomsky
, L.
, Rodomsky
, C.
, Jordan
, D.
, and Limperos
, J.
, 2014
, “Making Sense of 3D Printing: Creating a Map of Additive Manufacturing Products and Services
,” Addit. Manuf.
, pp. 64
–76
. 10.1016/j.addma.2014.08.00585.
Faustini
, M.
, Neptune
, R.
, and Crawford
, R.
, 2006
, “The Quasi-Static Response of Compliant Prosthetic Sockets for Transtibial Amputees Using Finite Element Methods
,” Med. Eng. Phys.
, 28
(2
), pp. 114
–121
. 10.1016/j.medengphy.2005.04.01986.
Systems
, “Bespoke Prosthetic Fairings: The Art of Personalized Medicine With Industrial 3D Printing
,” https://www.3dsystems.com/learning-center/case-studies/bespoke-prosthetic-fairings-art-personalized-medicine, Accessed Oct. 24, 201987.
Wang
, Y.
, Blache
, R.
, and Xu
, X.
, 2017
, “Selection of Additive Manufacturing Processes
,” Rapid Prototyp. J.
, 23
(2
), pp. 434
–447
. 10.1108/RPJ-09-2015-012388.
Seepersad
, C.
, 2014
, “Challenges and Opportunities in Design for Additive Manufacturing
,” 3D Print. Addit. Manuf.
, 1
(1
), pp. 10
–13
. 10.1089/3dp.2013.000689.
Laverne
, F.
, Segonds
, F.
, Anwer
, N.
, and Le Coq
, M.
, 2015
, “Assembly Based Methods to Support Product Innovation in Design for Additive Manufacturing: An Exploratory Case Study
,” ASME J. Mach. Des
, 137
(12
), p. 121701
. 10.1115/1.403158990.
Kumke
, M.
, Watschke
, H.
, Hartogh
, P.
, Bavendiek
, A.-K.
, and Vietor
, T.
, 2018
, “Methods and Tools for Identifying and Leveraging Additive Manufacturing Design Potentials
,” Int. J. Interact. Des. Manuf.
, 12
(2
), pp. 481
–493
. 10.1007/s12008-017-0399-791.
Blosch-Paidosh
, A.
, and Shea
, K.
, 2019
, “Design Heuristics for Additive Manufacturing Validated Through a User Study
,” ASME J. Mech. Des.
, 141
(2
), p. 041101
. 10.1115/1.404105192.
Perez
, B.
, Anderson
, D.
, and Wood
, K.
, 2015
, “Crowdsourced Design Principles for Leveraging the Capabilities of Additive Manufacturing
,” International Conference of Engineering Design
, Milan, Italy
.93.
Prabhu
, R.
, Miller
, S.
, Simpson
, T.
, and Meisel
, N.
, 2020
, “Exploring the Effects of Additive Manufacturing Education on Students’ Engineering Design Process and its Outcomes
,” ASME J. Mech. Des.
, 142
(4
), p. 042001
. 10.1115/1.404432494.
Perez
, B.
, Hilburn
, S.
, Jensen
, D.
, and Wood
, K. L.
, 2018
, “Design Principle-Based Stimuli for Improving Creativity During Ideation
,” Proc. Inst. Mech. Eng. Part C
.95.
Yang
, S.
, Page
, T.
, Zhang
, Y.
, and Zhao
, Y. F.
, 2020
, “Towards an Automated Decision Support System for the Identification of Additive Manufacturing Part Candidates
,” J. Intell. Manuf.
, pp. 1
–17
. 10.1007/s10845-020-01545-696.
Munguía
, J.
, Ciurana
, J.
, and Riba
, C.
, 2009
, “Neural-Network-Based Model for Build-Time Estimation in Selective Laser Sintering
,” Proc. Inst. Mech. Eng. Part B
, 223
(8
), pp. 995
–1003
. 10.1243/09544054JEM132497.
Williams
, G.
, Meisel
, N. A.
, Simpson
, T. W.
, and McComb
, C.
, 2019
, “Design Repository Effectiveness for 3D Convolutional Neural Networks: Application to Additive Manufacturing
,” ASME J. Mech. Des.
, 141
(11
), p. 111701
. 10.1115/1.404419998.
Booth
, J.
, Alperovich
, J.
, Chawla
, P.
, Ma
, J.
, Reid
, T.
, and Ramani
, K.
, 2017
, “The Design for Additive Manufacturing Worksheet
,” ASME J. Mech. Des.
, 139(10), p. 100904
. 10.1115/1.403725199.
Mani
, M.
, Witherell
, P.
, and Jee
, H.
, 2017
, “Design Rules for Additive Manufacturing
,” ASME IDETC Computers and Information in Engineering Conference
, Cleveland, OH
.100.
Allison
, J.
, Sharpe
, C.
, and Seepersad
, C.
, 2019
, “Powder Bed Fusion Metrology for Additive Manufacturing Design Guidance
,” Addit. Manuf.
, 25
, pp. 239
–251
. 10.1016/j.addma.2018.10.035101.
Dinar
, M.
, and Rosen
, D.
, 2017
, “A Design for Additive Manufacturing Ontology
,” ASME J. Comput. Inf. Sci. Eng.
, p. 021013
. 10.1115/1.4035787102.
Meisel
, N.
, and Williams
, C.
, 2015
, “An Investigation of Key Design for Additive Manufacturing Constraints in Multimaterial Three-Dimensional Printing
,” ASME J. Mech. Des.
, 137
(11
), p. 111406
. 10.1115/1.4030991103.
Adam
, G.
, and Zimmer
, D.
, 2014
, “Design for Additive Manufacturing—Element Transitions and Aggregated Structures
,” CIRP J. Manuf. Sci. Technol.
, 7
(1
), pp. 20
–28
. 10.1016/j.cirpj.2013.10.001104.
Bendsoe
, M.
, and Kikuchi
, N.
, 1988
, “Generating Optimal Topologies in Structural Design Using a Homogenization Method
,” Comput. Methods Appl. Mech. Eng.
, 71
(2
), pp. 197
–224
. 10.1016/0045-7825(88)90086-2105.
Bendsoe
, M.
, 1989
, “Optimal Shape Design as a Material Distribution Problem
,” Struct. Optim.
, 1
(4
), pp. 193
–202
. 10.1007/BF01650949106.
Liu
, J.
, Gaynor
, A.
, Chen
, S.
, Kang
, Z.
, Suresh
, K.
, Takezawa
, A.
, Li
, L.
, Kato
, J.
, Tang
, J.
, Wang
, C.
, Cheng
, L.
, Liang
, X.
, and To
, A.
, 2018
, “Current and Future Trends in Topology Optimization for Additive Manufacturing
,” Struct. Multidiscip. Optim.
, 57
(6
), pp. 2457
–2483
. 10.1007/s00158-018-1994-3107.
Gorguluarslan
, R.
, Park
, S.-I.
, Rosen
, D.
, and Choi
, S.-K.
, 2015
, “A Multilevel Upscaling Method for Material Characterization of Additively Manufactured Part Under Uncertainties
,” ASME J. Mech. Des.
, 137
(11
), p. 111408
. 10.1115/1.4031012108.
Gleadall
, A.
, Ashcroft
, I.
, and Segal
, J.
, 2018
, “VOLCO: A Predictive Model for 3D Printed Microarchitecture
,” Addit. Manuf.
, 21
, pp. 605
–618
. 10.1016/j.addma.2018.04.004109.
Gorguluarslan
, R.
, Gandhi
, U.
, Song
, Y.
, and Choi
, S.
, 2017
, “An Improved Lattice Structure Design Optimization Framework Considering Additive Manufacturing Constraints
,” Rapid Prototyp. J.
, 23
(2
), pp. 305
–319
. 10.1108/RPJ-10-2015-0139110.
Xiong
, Y.
, Duong
, P. L. T.
, Wang
, D.
, Park
, S. I.
, Ge
, Q.
, Raghavan
, N.
, and Rosen
, D. W.
, 2019
, “Data-driven Design Space Exploration and Exploitation for Design for Additive Manufacturing
,” ASME J. Mech. Des.
, 141
(10
), p. 101101
. 10.1115/1.4043587111.
Schmelzle
, J.
, Kline
, E.
, Dickman
, C.
, Reutzel
, E.
, Jones
, G.
, and Simpson
, T.
, 2015
, “(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing
,” ASME J. Mech. Des.
, 137
(11
), p. 111404
. 10.1115/1.4031156112.
Yang
, S.
, Tang
, Y.
, and Zhao
, Y.
, 2015
, “A New Part Consolidation Method to Embrace the Design Freedom of Additive Manufacturing
,” J. Manuf. Process.
, 20
, pp. 444
–449
. 10.1016/j.jmapro.2015.06.024113.
Yang
, S.
, Santoro
, F.
, and Zhao
, Y.
, 2018
, “Towards a Numerical Approach of Finding Candidates for Additive Manufacturing-Enabled Part Consolidation
,” ASME J. Mech. Des.
, 140
(4
), p. 041701
. 10.1115/1.4038923114.
Yang
, S.
, and Zhao
, Y.
, 2018
, “Additive Manufacturing-Enabled Part Count Reduction: A Lifecycle Perspective
,” ASME J. Mech. Des.
, 140
(3
), p. 031702
. 10.1115/1.4038922115.
Yang
, S.
, Min
, W.
, Ghibaudo
, J.
, and Zhao
, Y.
, 2019
, “Understanding the Sustainability Potential of Part Consolidation Design Supported by Additive Manufacturing
,” J. Cleaner Prod.
, 232
, pp. 722
–738
. 10.1016/j.jclepro.2019.05.380116.
MacDonald
, E.
, and Wicker
, R.
, 2016
, “Multiprocess 3D Printing for Increasing Component Functionality
,” Science
, 353
(6307
), pp. aaf2093
–aaf2093
. 10.1126/science.aaf2093117.
Thompson
, M.
, Moroni
, G.
, Vaneker
, T.
, Fadel
, G.
, Campbell
, R.
, Gibson
, I.
, Bernard
, A.
, Schulz
, J.
, Graf
, P. A. B.
, and Martina
, F.
, 2016
, “Design for Additive Manufacturing: Trends, Opportunities, Considerations, and Constraints
,” CIRP Ann.
, 65
(2
), pp. 737
–760
. 10.1016/j.cirp.2016.05.004118.
Yang
, S.
, and Zhao
, Y.
, 2015
, “Additive Manufacturing Enabled Design Theory and Methodology: A Critical Review
,” Int. J. Adv. Manuf. Technol.
, 80
(1
), pp. 327
–342
. 10.1007/s00170-015-6994-5119.
Boyard
, N.
, Rivette
, M.
, Christmann
, O.
, and Richir
, S.
, 2013
, “A Design Methodology for Parts Using Additive Manufacturing
,” 6th International Conference on Advanced Research in Virtual and Rapid Prototyping
, Leiria, Portugal
.120.
Kumke
, M.
, Watschke
, H.
, and Vietor
, T.
, 2016
, “A New Methodological Framework for Design for Additive Manufacturing
,” Virtual Phys. Prototyp.
, 11
(1
), pp. 3
–19
. 10.1080/17452759.2016.1139377121.
Zhang
, Y.
, Bernard
, A.
, Gupta
, R.
, and Harik
, R.
, 2014
, “Evaluating the Design for Additive Manufacturing: A Process Planning Perspective
,” Procedia CIRP
, 21
, pp. 144
–150
. 10.1016/j.procir.2014.03.179122.
Ponche
, R.
, Hascoet
, J.
, Kerbrat
, O.
, and Mognol
, P.
, 2017
, “A New Global Approach to Design for Additive Manufacturing,” Additive Manufacturing Handbook
, CRC Press
, pp. 169
–180
.123.
Clymer
, D.
, Cagan
, J.
, and Beuth
, J.
, 2017
, “Power-Velocity Process Design Charts for Powder Bed Additive Manufacturing
,” ASME J. Mech. Des.
, 139
(10
), p. 100907
. 10.1115/1.4037302124.
Kirk
, T.
, Galvan
, E.
, Malak
, R.
, and Arroyave
, R.
, 2018
, “Computational Design of Gradient Paths in Additively Manufactured Functionally Graded Materials
,” ASME J. Mech. Des.
, 140
(11
), p. 111410
. 10.1115/1.4040816125.
Rosen
, D.
, 2007
, “Computer-Aided Design for Additive Manufacturing of Cellular Structures
,” Comput. Aided Des. Appl.
, 4
(5
), pp. 585
–594
. 10.1080/16864360.2007.10738493126.
McDowell
, D.
, Panchal
, J.
, Choi
, H.
, Seepersad
, C.
, Allen
, J.
, and Mistree
, F.
, 2009
, Integrated Design of Multiscale, Multifunctional Materials and Products
, Butterworth-Heinemann
.127.
Leigh
, D.
, 2019
, “Improved Process Stability and Ductility in Laser Sintered Polyamide
,” Ph.D. dissertation
, University of Texas at Austin
.128.
Bourell
, D.
, Watt
, T.
, Leigh
, D.
, and Fulcher
, B.
, 2014
, “Performance Limitations in Polymer Laser Sintering
,” Phys. Procedia
, 56
, pp. 147
–156
. 10.1016/j.phpro.2014.08.157129.
Dickens
, E.
, Lee
, B.
, Taylor
, G.
, Magistro
, A.
, and Ng
, H.
, 1994
, “Sinterable Semi-crystalline Powder an Near-fully Dense Article Formed Therewith
,” U.S. Patent 5,342,919
.130.
Phillips
, T.
, Fish
, S.
, and Beaman
, J.
, 2018
, “Development of an Automated Laser Control System for Improving Temperature Uniformity and Controlling Component Strength in Selective Laser Sintering
,” Add. Manuf.
, 24
, pp. 316
–322
. 10.1016/j.addma.2018.10.016131.
Zaldivar
, R.
, Witkin
, D.
, Patel
, D.
, Schmitt
, K.
, and Nokes
, J.
, 2017
, “Influence of Processing and Orientation Print Effects on the Mechanical and Thermal Behvior of 3D-Printed ULTEM 9085 Material
,” Add. Manf.
, 13
, pp. 71
–80
. 10.1016/j.addma.2016.11.007132.
Direct
, S.
, 2020
, “The Ultimate 3D Printing Match Up: Laser Sintering vs. Fused Depostion Modeling
,” https://www.stratasysdirect.com/manufacturing-services/3d-printing/selective-laser-sintering-vs-fused-deposition-modeling, Accessed July 29, 2020.133.
Manriquez-Frayre
, J.
, and Bourell
, D.
, 1990
, “Selective Laser Sintering of Binary Metallic Powder
,” Solid Freeform Fabrication Symposium
, The University of Texas at Austin
.134.
Bourell
, D.
, Marcus
, H.
, Barlow
, J.
, Beaman
, J.
, and Deckard
, C.
, 1990
, “Multiple Material Systems for Selective Beam Sintering
,” U.S. Patent 4,944,817
.135.
Das
, S.
, McWllliams
, B. W. J.
, and Beaman
, J.
, 1991
, “Design of a High Temperature Workstation for the Selective Laser Sintering Process
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.136.
Nyrhila
, O.
, 1996
, “Direct Laser Sintering of Injection Moulds
,” 5th European Conference on Rapid Prototyping and Manufacturing
, University of Nottingham
.137.
Nyrhila
, O.
, Kotila
, J.
, Lind
, J.
, and Syvänen
, T.
, 1998
, “Industrial Use of Direct Metal Laser Sintering
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.138.
Agarwala
, M.
, Bourell
, D.
, Wu
, B.
, and Beaman
, J.
, 1993
, “An Evaluation of the Mechanical Behavior of Bronze Nickel Composites Produced by Selective Laser Sintering
,” Solid Freeform Fabrication Symposium
, The University at Austin
.139.
Larson
, R.
, 1998
, “Method and Device for Producing Three-dimensional Bodies
,” U.S. Patent 5,786,562
.140.
Plessis
, A.
, Yadroitsava
, I.
, and Yadroitsev
, I.
, 2018
, “Nondestructive Micro-CT Inspection of Additive Parts: How to Beat the Bottlenecks
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.141.
Dietrich
, S.
, Englert
, L.
, and Pinter
, P.
, 2018
, “Non-destructive Characterization of Additively Manufactured Components Using X-Ray Micro-Computed Tomography
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.142.
Hyde
, C. J.
, Xu
, Z.
, Thompson
, A.
, Leach
, R. K.
, Maskery
, I.
, Tuck
, C. J.
, and Clare
, A. T.
, 2017
, “On the Use of X-Ray Computed Tomography for Monitoring the Failure of an Inconel 718 Two-bar Specimen Manufactured by Laser Powder Bed Fusion
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.143.
Narra
, S.
, Ozturk
, T.
, Beuth
, J.
, and Rollett
, A. D.
, 2016
, “Valuating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-Ray Microtomography
,” JOM
, 68
(3
), p. 765
. 10.1007/s11837-015-1802-0144.
Zhao
, C.
, Fezzaa
, K.
, Cunningham
, R. W.
, Wen
, H.
, Carlo
, F. D.
, Chen
, L.
, Rollett
, A. D.
, and Sun
, T.
, 2017
, “Real-Time Monitoring of Laser Powder Bed Fusion Process Using High-Speed X-Ray Imaging and Diffraction
,” Sci. Rep.
, 7
(1
), p. 3602
. 10.1038/s41598-017-03761-2145.
Cunningham
, R.
, Zhao
, C.
, Parab
, N.
, Kantzos
, C.
, Pauza
, J.
, Fezzaa
, K.
, Sun
, T.
, and Rollett
, A. D.
, 2019
, “Keyhole Threshold and Morphology in Laser Melting Revealed by Ultrahigh-Speed X-Ray Imaging
,” Science
, 363
(6
), pp. 849
–852
. 10.1126/science.aav4687146.
Zhou
, X.
, Wang
, D.
, Liu
, X.
, Zhang
, D.
, Qu
, S.
, Ma
, J.
, London
, G.
, Shen
, Z.
, and Liu
, W.
, 2015
, “3D-Imaging of Selective Laser Melting Defects in a Co–Cr–Mo Alloy by Synchrotron Radiation Micro-CT
,” Acta Mater.
, 98
, pp. 1
–16
. 10.1016/j.actamat.2015.07.014147.
Lun
, C.
, Leung
, A.
, Marussi
, S.
, Atwood
, R. C.
, Towrie
, M.
, Withers
, P. J.
, and Lee
, P. D.
, 2018
, “In Situ X-Ray Imaging of Defect and Molten Pool Dynamics in Laser Additive Manufacturing
,” Nat. Commun.
, 9
(1
), p. 1355
. 10.1038/s41467-018-03734-7148.
Barrett
, C.
, Carradero
, C.
, Harris
, E.
, McKnight
, J.
, Walker
, J.
, MacDonald
, E.
, and Conner
, B.
, 2018
, “Low Cost, High Speed Stereovision for Spatter Tracking in Laser Powder Bed Fusion
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.149.
Francois
, M.
, Sun
, A.
, and King
, W.
, et al, 2016
, “Modeling of Additive Manufacturing Processes for Metals: Challenges and Opportunities
,” Curr. Opin. Solid State Mater. Sci.
, 21
(4
), pp. 198
–206
. 10.1016/j.cossms.2016.12.001150.
Khairallah
, S.
, and Anderson
, A.
, 2014
, “Mesoscopic Simulation Model of Selective Laser Melting of Stainless Steel Powder
,” J. Mater. Process. Technol.
, 214
(11
), pp. 2627
–2636
. 10.1016/j.jmatprotec.2014.06.001151.
Cheng
, B.
, Li
, X.
, Tuffile
, C.
, Ilin
, A.
, Willeck
, H.
, and Hartel
, U.
, 2018
, “Multi-Physics Modeling of Single Track Scanning in Selective Laser Melting: Powder Compaction Effect
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.152.
Lee
, Y.
, Kirka
, M.
, Raghavan
, N.
, and Dehoff
, R.
, 2017
, “Simulation of Spot Melting Scan Strategy to Predict Columnar to Equiaxed Transition in Metal Additive Manufacturing
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.153.
Shrestha
, S.
, and Chou
, K.
, 2017
, “Mesoscopic Multilayer Simulation of Selective Laser Melting Process
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.154.
Wang
, X.
, Lough
, C. S.
, Bristow
, D. A.
, Landers
, R. G.
, and Kinzel
, E. C.
, 2018
, “Effects of Thermal Camera Resolution on Feature Extraction in Selective Laser Melting
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.155.
Kouprianoff
, D.
, Luwes
, N.
, Yadroitsava
, I.
, and Yadroitsev
, I.
, 2018
, “Acoustic Emission Technique for Online Detection of Fusion Defects for Single Tracks During Metal Laser Powder Bed Fusion
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.156.
Eschner
, N.
, Weiser
, L.
, Häfner
, B.
, and Lanza
, G.
, 2018
, “Development of an Acoustic Process Monitoring System for the Selective Laser Melting (SLM)
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.157.
Lough
, C. S.
, Escano
, L. I.
, Qu
, M.
, Smith
, C. C.
, Landers
, R. G.
, Bristow
, D. A.
, Chen
, L.
, and Kinzel
, E. C.
, 2018
, “In-Situ Optical Emission Spectroscopy During SLM of 304L Stainless Steel
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.158.
Lough
, C. S.
, Wang
, X.
, Smith
, C. C.
, Adeniji
, O.
, Landers
, R. G.
, Bristow
, D. A.
, and Kinzel
, E. C.
, 2018
, “Use of SWIR Imaging to Monitor Layer-To-Layer Part Quality During SLM of 304L Stainless Steel
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.159.
Montazeri
, M.
, and Rao
, P.
, 2017
, “In-Process Condition Monitoring in Laser Powder Bed Fusion (LPBF)
,” Solid Freeform Fabrication Symposium
, University of Txas at Austin
.160.
Alberts
, D.
, Schwarze
, D.
, and Witt
, G.
, 2017
, “In Situ Melt Pool Monitoring and the Correlation to Part Density of Inconel® 718 for Quality Assurance in Selective Laser Melting
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.161.
Zeng
, K.
, Pal
, D.
, and Stucker
, B.
, 2012
, “A Review of Thermal Analysis Methods in Laser Sintering and Selective Laser Melting
,” Solid Freeform Fabrication
, University of Texas at Austin
.162.
Masoomi
, M.
, Paudel
, B.
, Shamsaei
, N.
, and Thompson
, S. M.
, 2018
, “Establishing Property-Performance Relationships Through Efficient Thermal Simulation of the Laser-Powder Bed Fusion Process
,” Solid Freeform Fabrication Symposium
, University of Texas at Austin
.163.
Contuzzi
, N.
, Campanelli
, S. L.
, and Ludovico
, A. D.
, 2011
, “3D Finite Element Analysis in the Selective Laser Melting Process
,” Int. J. Simul. Modell.
, 10
(3
), pp. 113
–121
. 10.2507/IJSIMM10(3)1.169164.
Tang
, Q.
, Pang
, S.
, Chen
, B.
, Suo
, H.
, and Zhou
, J.
, 2014
, “A Three Dimensional Transient Model for Heat Transfer and Fluid Flow of Weld Pool During Electron Beam Freeform Fabrication of Ti-6-Al-4-V Alloy
,” Int. J. Heat Mass Transfer
, 78
, pp. 203
–215
. 10.1016/j.ijheatmasstransfer.2014.06.048165.
Martukanitz
, R.
, Michaleris
, P.
, Palmer
, T.
, Debroy
, T.
, Liu
, Z.
, Otis
, R.
, Heo
, T.
, and Chen
, L.
, 2014
, “Toward an Integrated Computational System for Describing the Additive Manufacturing Process for Metallic Materials
,” Addit. Manuf.
, pp. 52
–63
. 10.1016/j.addma.2014.09.002166.
Klocke
, F.
, Derichs
, C.
, Ader
, C.
, and Demmer
, A.
, 2007
, “Investigations on Laser Sintering of Ceramic Slurries
,” Prod. Eng.
, 1
(3
), pp. 279
–284
. 10.1007/s11740-007-0047-3167.
Deckers
, J.
, Meyers
, S.
, Kruth
, J.
, and Vleugels
, J.
, 2014
, “Corrigendum to Direct Selective Laser Sintering/Melting of High Density Alumina Powder Layers at Elevated Temperatures
,” Phys. Procedia
, 56
, pp. 117
–124
. 10.1016/j.phpro.2014.08.154168.
Tay
, B.
, Evans
, J.
, and Edirisinghe
, M.
, 2003
, “Solid Freeform Fabrication of Ceramics
,” Int. Mater. Rev.
, 48
(6
), pp. 341
–370
. 10.1179/095066003225010263169.
Mostaghaci
, H.
, 1989
, “Processing of Ceramic and Metal Matrix Composites
,” Proceedings of the International Symposium on Advances in Processing of Ceramic and Metal Matrix Composites
, Halifax, Canada
.170.
Yang
, L.
, and Miyanaji
, H.
, 2017
, “Ceramic Additive Manufacturing: A Review of Current Status and Challenges
,” Solid Freeform Fabrication
, Austin
.171.
Kruth
, J.
, Levy
, G.
, Klocke
, F.
, and Childs
, T.
, 2007
, “Consolidation Phenomena in Laser and Powder-Bed Based Layered Manufacturing
,” CIRP Ann. Manuf. Technol.
, 56
(2
), pp. 730
–759
. 10.1016/j.cirp.2007.10.004172.
Hagedorn
, Y.
, Balachandran
, N.
, Meiners
, W.
, Wissembach
, K.
, and Poprawe
, R.
, 2011
, “SLM of Net-Shaped High Strength Ceramics: New Opportunities for Producing Dental Restorations
,” Solid Freeform Fabrication Symposium
, Austin, TX
.173.
Wilkes
, J.
, and Hagedorn
, Y.
, 2013
, “Additive Manufacturing of ZrO2–Al2O3 Ceramic Components by Selective Laser Melting
,” Rapid Prototyp. J.
, 19
(1
), pp. 51
–57
. 10.1108/13552541311292736174.
Wu
, Y.
, Du
, J.
, Choy
, K.
, and Hench
, L.
, 2007
, “Laser Densification of Alumina Powder Beds Generated Using Aerosol Assisted Spray Deposition
,” J. Eur. Ceram. Soc.
, 27
(16
), pp. 4727
–4735
. 10.1016/j.jeurceramsoc.2007.02.219175.
Lakshminarayan
, U.
, and Marcus
, H.
, 1991
, “Micro Structural and Mechanical Properties of Al2O3/P2O3 and Al2O3/B2O3 Composites Fabricated by Selective Laser Sintering
,” Solid Freeform Fabrication Symposium
, Austin
.176.
Lakshminarayan
, U.
, Ogrydiziak
, S.
, and Marcus
, H.
, 1990
, “Selective Laser Sintering of Ceramic Materials
,” Solid Freeform Fabrication Symposium
, Austin
.177.
Bertrand
, P.
, Bayle
, F.
, Combe
, C.
, Goeuriot
, P.
, and Smurov
, I.
, 2007
, “Ceramic Components Manufacturing by Selective Laser Sintering
,” Appl. Surf. Sci.
, 254
(4
), pp. 989
–992
. 10.1016/j.apsusc.2007.08.085178.
Cima
, M.
, and Sachs
, E.
, 1991
, “Three Dimensional Printing: Forms, Materials and Performance
,” Solid Freeform Fabrication Symposium
, Austin, TX
.179.
Cima
, M.
, Oliveira
, M.
, Wang
, H. S. E.
, and Holman
, R.
, 2001
, “Slurry-Based 3DP and Fine Ceramic Components
,” Solid Freeform Fabrication Symposium
, Austin, TX
.180.
Barlow
, J.
, and Vail
, N.
, 1994
, “Method of Producing High-Temperature Parts by Way of Low-Temperature Sintering
,” U.S. Patent 5284695
.181.
Deckers
, J.
, Shahzad
, K.
, Vleugels
, J.
, and Kruth
, J.
, 2012
, “Isostatic Pressing Assisted Indirect Selective Laser Sintering of Alumina Components
,” Rapid Prototyp. J.
, 18
(5
), pp. 409
–419
. 10.1108/13552541211250409182.
Shahzad
, K.
, Deckers
, J.
, Zhang
, Z.
, Kruth
, J.
, and Vleugels
, J.
, 2014
, “Additive Manufacturing of Zirconia Parts by Indirect Selective Laser Sintering
,” J. Eur. Ceram. Soc.
, 34
(1
), pp. 81
–89
. 10.1016/j.jeurceramsoc.2013.07.023183.
Leu
, M.
, Adamek
, E.
, Hilmas
, H. T. G.
, and Dogan
, F.
, 2008
, “Freeform Fabrication of Zirconium Diboride Parts Using Selective Laser Sintering
,” Solid Freeform Fabrication
, Austin, TX
.184.
Leu
, M.
, Pattnaik
, S.
, and Hilmas
, G.
, 2012
, “Investigation of Laser Sintering for Freeform Fabrication of Zirconium Diboride Parts
,” Virtual Phys. Prototyp.
, 7
(1
), pp. 25
–36
. 10.1080/17452759.2012.666119185.
Lee
, G.
, and Barlow
, J.
, 1994
, “Selective Laser Sintering of Calcium Phosphate Powders
,” Solid Freeform Fabrication Symposium
, Austin, TX
.186.
Lee
, I.
, 1998
, “Rapid Full Densification of Alumina-Glass Composites Fabricated by a Selective Laser Sintering Process
,” J. Mater. Sci. Lett.
, 17
(22
), pp. 1907
–1911
. 10.1023/A:1006600208059187.
Bai
, P.
, Cheng
, J.
, and Liu
, B.
, 2005
, “Selective Laser Sintering of Polymer-Coated Al2O3/ZrO2/TiC Ceramic Powder
,” Trans. Nonferrous Met. Soc. China
, 15
(2
), pp. 261
–265
.188.
Subramanian
, K.
, Vail
, N.
, Barlow
, J.
, and Marcus
, H.
, 1995
, “Selective Laser Sintering of Alumina With Polymer Binders
,” Rapid Prototyp. J.
, 1
(2
), pp. 24
–35
. 10.1108/13552549510086844189.
Shahzad
, K.
, Deckers
, J.
, Boury
, S.
, Neirinck
, B.
, Kruth
, J.-P.
, and Vleugels
, J.
, 2012
, “Preparation and Indirect Selective Laser Sintering of Alumina/PA Micro Spheres
,” Ceram. Int.
, 38
(2
), pp. 1241
–1247
. 10.1016/j.ceramint.2011.08.055190.
Shahzad
, K.
, Deckers
, J.
, Kruth
, J.-P.
, and Vleugels
, J.
, 2012
, “Additive Manufacturing of Alumina Parts by Indirect Selective Laser Sintering and Post-Processing
,” J. Mater. Process. Technol.
, 213
(9
), pp. 1484
–1494
. 10.1016/j.jmatprotec.2013.03.014191.
Vail
, N.
, Barlow
, J.
, and Marcus
, H.
, 1993
, “Silicon Carbide Preforms for Metal Infiltration by Selective Laser Sintering of Polymer Encapsulated Powders
,” Solid Freeform Fabrication Symposium
, Austin, TX
.192.
Tang
, H.-H.
, 2006
, “Building Ultra-Thin Layers by Ceramic Laser Sintering
,” Mater. Trans.
, 47
(3
), pp. 889
–897
. 10.2320/matertrans.47.889193.
Tang
, H.-H.
, Chiu
, M.-L.
, and Yen
, H.-C.
, 2011
, “Slurry-Based Selective Laser Sintering of Polymer-Coated Ceramic Powders to Fabricate High Strength Alumina Parts
,” J. Eur. Ceram. Soc.
, 31
(8
), pp. 1383
–1388
. 10.1016/j.jeurceramsoc.2011.02.020194.
Zimbeck
, W.
, Pope
, M.
, and Rice
, R.
, 1996
, “Microstructures and Strengths of Metals and Ceramics Made by Photopolymer-Based Rapid Prototyping
,” Solid Freeform Fabrication Symposium
, Austin, TX
.195.
Brady
, G.
, and Halloran
, J.
, 1997
, “Stereolithography of Ceramic Suspensions
,” Rapid Prototyp. J.
, 3
(2
), pp. 61
–65
. 10.1108/13552549710176680196.
Augsburg
, M.
, Storch
, S.
, Nissen
, F.
, and Witt
, G.
, 2004
, “Rapid Prototyping with Ceramic-Filled Epoxy Resin by Optoforming
,” Rapid Prototyp. J.
, 10
(4
), pp. 225
–231
. 10.1108/13552540410551342197.
Schwentenwein
, M.
, and Homa
, J.
, 2015
, “Additive Manufacturing of Dense Alumina Ceramics
,” Int. J. Appl. Ceram. Technol.
, 12
(1
), pp. 1
–7
. 10.1111/ijac.12319198.
Griffith
, M.
, and Halloran
, J.
, 1996
, “Freeform Fabrication of Ceramics via Stereo-Lithography
,” J. Am. Ceram. Soc.
, 79
(10
), pp. 2601
–2608
. 10.1111/j.1151-2916.1996.tb09022.x199.
Hinczewski
, C.
, Corbel
, S.
, and Chartier
, T.
, 1998
, “Stereolithography for the Fabrication of Ceramic Three- Dimensional Parts
,” Rapid Prototyp. J.
, 4
(3
), pp. 104
–111
. 10.1108/13552549810222867200.
Polzin
, C.
, Günther
, D.
, and Seitz
, H.
, 2015
, “3D Printing of Porous Al2O3 and SiC Ceramics
,” J. Ceram. Sci. Technol.
, 6
(12
), pp. 141
–146
.201.
Wu
, H.
, Li
, D.
, and Guo
, N.
, 2009
, “Fabrication of Integral Ceramic Mould for Investment Casting of Hollow Turbine Blade Based on Stereolithography
,” Rapid Prototyp. J.
, 15
(4
), pp. 232
–237
. 10.1108/13552540910979749202.
Corcione
, C.
, Montagna
, F.
, Greco
, A.
, Licciulli
, A.
, and Maffezzoli
, A.
, 2006
, “Free Form Fabrication of Silica Moulds for Aluminium Casting by Stereolithography
,” Rapid Prototyp. J.
, 12
(4
), pp. 184
–188
. 10.1108/13552540610682688203.
Dufaud
, O.
, and Corbel
, S.
, 2002
, “Stereolithography of PZT Ceramic Suspensions
,” Rapid Prototyp. J.
, 8
(2
), pp. 83
–90
. 10.1108/13552540210420952204.
Eckel
, Z.
, Zhou
, C.
, Martin
, J.
, and Jocobsen
, A. C. W. S. A.
, 2016
, “Additive Manufacturing of Polymer-Derived Ceramics
,” Science
, 351
(58
).205.
Cui
, H.
, Hensleigh
, R.
, Chen
, H.
, and Zheng
, X.
, 2018
, “Additive Manufacturing and Size-Dependent Mechanical Properties of Three-Dimensional Microarchitected, High-Temperature Ceramic Metamaterials
,” J. Mater. Res.
, 33
(3
), pp. 360
–371
. 10.1557/jmr.2018.11206.
Wang
, C.
, Ping
, W.
, Bai
, Q.
, Cui
, H.
, Hensleigh
, R.
, Wang
, R.
, Brozena
, A.
, Xu
, Z.
, Dai
, J.
, Pei
, Y.
, Zheng
, C.
, Pastel
, G.
, Gao
, J.
, Wang
, X.
, Wang
, H.
, Zhao
, J.
, Yang
, B.
, Zheng
, X.
, Luo
, J.
, Mo
, Y.
, Dunn
, B.
, and Hu
, L.
, 2020
, “A General Method to Synthesize and Sinter Bulk Ceramics in Seconds
,” Science
, 368
(6490
), pp. 521
–526
. 10.1126/science.aaz7681.207.
Griffin
, E.
, and McMillin
, S.
, 1995
, “Selective Laser Sintering and Fused Deposition Modelling Processes for Functional Ceramic Parts
,” Solid Freeform Fabrication Symposium
, Austin, TX
.208.
Agarwala
, M.
, van Weeren
, R.
, Yaidyanathan
, R.
, Bandyopadhyay
, A.
, Carrasquilo
, G.
, Jamalabad
, V.
, Langrana
, N.
, Safari
, A.
, Garofalini
, S.
, Danforth
, S.
, Burlew
, J.
, Donaldson
, R.
, Whalen
, P.
, and Ballard
, C.
, 1995
, “Structural Ceramics by Fused Deposition of Ceramics
,” Solid Freeform Fabrication Symposium
, Austin, TX
.209.
McIntosh
, J.
, Danforth
, S.
, and Jamalabad
, V.
, 1997
, “Shrinkage and Deformation in Components Manufactured by Fused Deposition of Ceramics
,” Solid Freeform Fabrication Symposium
, Austin, TX
.210.
Rangarajan
, S.
, Qi
, Q.
, Venkataraman
, N.
, Safari
, A.
, and Danforth
, S.
, 2000
, “Powder Processing, Rheology, and Mechanical Properties of Feedstock for Fused Deposition of Si3N4 Ceramics
,” J. Am. Ceram. Soc.
, 83
(7
), pp. 1663
–1669
. 10.1111/j.1151-2916.2000.tb01446.x211.
212.
Cesarano
, J.
, Baer
, T.
, and Calvert
, J.
, 1997
, “Recent Developments in Freeform Fabrication of Dense Ceramics From Slurry Deposition
,” Solid Freeform Fabrication Symposium
, Austin, TX
.213.
Cesarano
, J.
, Segalman
, R.
, and Calvert
, P.
, 1998
, “Robocasting Provides Mould-Less Fabrication From Slurry Deposition
,” Ceram. Ind.
, 148
, pp. 94
–101
.214.
Cesarano
, J.
, Baer
, T.
, and Calvert
, J.
, 1997
, “Recent Developments in Freeform Fabrication of Dense Ceramics From Slurry Deposition
,” Solid Freeform Fabrication Symposium
, Austin, TX
.215.
Roleček
, J.
, Pejchalová
, L.
, Martínez-Vázquez
, F.
, Miranda
, G.
, and Salamon
, D.
, 2019
, “Bioceramic Scaffolds Fabrication: Indirect 3D Printing Combined with ice-Templating vs. Robocasting
,” J. Eur. Ceram. Soc.
, 39
(4
), pp. 1595
–1602
. 10.1016/j.jeurceramsoc.2018.12.006216.
Eqtesadi
, S.
, Motealleh
, A.
, Miranda
, P.
, Pajares
, A.
, Lemos
, A.
, and Ferreira
, J.
, 2014
, “Robocasting of 45S5 Bioactive Glass Scaffolds for Bone Tissue Engineering
,” J. Eur. Ceram. Soc.
, 34
(1
), pp. 107
–118
. 10.1016/j.jeurceramsoc.2013.08.003217.
Doiphode
, N.
, Huang
, T.
, Leu
, M.
, Rahaman
, M.
, and Day
, D.
, 2011
, “Freeze Extrusion Fabrication of 13–93 Bioactive Glass Scaffolds for Bone Repair
,” J. Mater. Sci.
, 22
(3
), pp. 515
–523
. 10.1007/s10856-011-4236-4218.
Huang
, T.
, Mason
, M.
, Hilmas
, G.
, and Leu
, M.
, 2006
, “Freeze-Form Extrusion Fabrication of Ceramic Parts
,” Int. J. Virtual Phys. Prototyp.
, 1
(2
), pp. 93
–100
. 10.1080/17452750600649609219.
Huang
, T.
, Mason
, M.
, Hilmas
, G.
, and Leu
, M.
, 2009
, “Aqueous-Based Freeze-Form Extrusion Fabrication of Alumina Components
,” Rapid Prototyp. J.
, 15
(2
), pp. 88
–95
. 10.1108/13552540910943388220.
Chen
, H.
, Wang
, X.
, Xue
, F.
, Huang
, Y.
, Zhou
, K.
, and Zhang
, D.
, 2018
, “3D Printing of SiC Ceramic: Direct ink Writing with a Solution of Preceramic Polymers
,” J. Eur. Ceram. Soc.
, 38
(16
), pp. 5294
–5300
. 10.1016/j.jeurceramsoc.2018.08.009221.
Zocca
, A.
, Franchin
, G.
, Elsayed
, H.
, Gioffredi
, E.
, Bernardo
, E.
, Colombo
, P.
, and Bandyopadhyay
, A.
, 2016
, “Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds
,” J. Am. Ceram. Soc.
, 99
(6
), pp. 1960
–1967
. 10.1111/jace.14213222.
Franchin
, G.
, Wahl
, L.
, and Colombo
, P.
, 2017
, “Direct Ink Writing of Ceramic Matrix Composite Structures
,” J. Am. Ceram. Soc.
, 100
(10
), pp. 4397
–4401
. 10.1111/jace.15045223.
Larson
, C.
, Choi
, J.
, Gallardo
, P.
, Henderson
, S.
, Niemack
, M.
, Rajagopalan
, G.
, and Shepherd
, R.
, 2016
, “Direct Ink Writing of Silicon Carbide for Microwave Optics
,” Adv. Eng. Mater.
, 18
(1
), pp. 39
–45
. 10.1002/adem.201500298224.
Agarwala
, M.
, Klosterman
, D.
, Osborne
, N.
, and Lightman
, A.
, 1999
, “Hard Metal Tooling via SFF of Ceramics and Powder Metallurgy
,” Solid Freeform Fabrication Symposium
, Austin, TX
.225.
Gomes
, C.
, Oliveira
, A.
, Hotza
, D. T. N.
, and Greil
, P.
, 2008
, “LZSA Glass-Ceramic Laminates: Fabrication and Mechanical Properties
,” J. Mater. Process. Tech.
, 206
(1–3
), pp. 194
–201
. 10.1016/j.jmatprotec.2007.12.011226.
Dautenbach
, G. C. J.
, and McMillin
, S.
, 1994
, “Desktop Manufacturing—LOM vs. Pressing
,” Ceramic Bull.
, 73
(8
), pp. 109
–114
.227.
Williams
, C.
, 2008
, “Design and Development of a Layer-Based Additive Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure
,” Ph.D. thesis
, Georgia Institute of Technology
.228.
Derby
, B.
, 2015
, “Additive Manufacture of Ceramics Components by Inkjet Printing
,” Engineering
, 1
(1
), pp. 113
–123
. 10.15302/J-ENG-2015014229.
Wilkinson
, N.
, Smith
, M.
, Kay
, R.
, and Harris
, R.
, 2019
, “A Review of Aerosol Jet Printing—A Non-Traditional Hybrid Process for Micro-Manufacturing
,” Int. J. Adv. Manuf. Technol.
, pp. 1
–21
. 10.1007/s00170-019-03438-2230.
Hanft
, D.
, Exner
, J.
, Schubert
, M.
, Stöcker
, T.
, Fuierer
, P.
, and Moos
, R.
, 2015
, “An Overview of the Aerosol Deposition Method
,” Process Fundamentals and New Trends in Materials Applications
.231.
Lee
, B.
, Jung
, J.
, Hahn
, B.
, Yoon
, W.
, Park
, D.
, Choi
, J.
, Ryu
, J.
, Kim
, J.
, and Ahn C
, S. K.
, 2011
, “Dense Yttria Film Deposited on a Plasma-Sprayed Al2O3 Coating by Aerosol Deposition
,” J. Ceram. Sci. Tech.
, 2
(4
), pp. 197
–202
.232.
Akedo
, J.
, and Lebedev
, M.
, 1999
, “Microstructure and Electrical Properties of Lead Zirconate Titanate (Pb(Zr52Ti48)O3) Thick Films Deposited by Aerosol Deposition Method
,” Jpn. J. Appl. Phys.
, 38
(9B
), pp. 5397
–5401
. 10.1143/JJAP.38.5397233.
Lebedev
, M.
, Akedo
, J.
, and Ito
, T.
, 2005
, “Substrate Heating Effects on Hardness of an a-Al2O3 Thick Film Formed by Aerosol Deposition Method
,” J. Cryst. Growth
, 275
(1–2
), pp. 1301
–1306
. 10.1016/j.jcrysgro.2004.11.109234.
Iwasawa
, J.
, Nishimizu
, R.
, Tokita
, M.
, Kiyohara
, M.
, and Uematsu
, K.
, 2007
, “Plasma-Resistant Dense Yttrium Oxide Film Prepared by Aerosol Deposition Process
,” J. Am. Ceram. Soc.
, 90
(8
), pp. 2327
–2332
. 10.1111/j.1551-2916.2007.01738.xCopyright © 2020 by ASME
You do not currently have access to this content.
