...Christina A. Pappas; Donald A. Jordan; Pamela M. Norris Figure 1( a ) is a diagram of the experimental setup for this study and is very slightly adapted from Pappas et al. [ 11 ]. The thermosyphon is placed in the test section of an open return wind tunnel to simulate an air-cooling heat sink...

...; published online March 20, 2013. Assoc. Editor: Bruce L. Drolen. 26 03 2012 19 11 2012 The effect of fill volume on the heat transfer performance of a cylindrical thermosyphon with an aspect ratio (ratio of the length of the evaporator section to the inner diameter) of 2.33 immersed...

...Lin Chen; Xin-Rong Zhang This paper deals with the natural convective circulation thermosyphon with supercritical CO 2 flow. New heat transport model aiming at supercritical thermosyphon heat transfer and stability is proposed and numerically studied. Two-dimensional rectangular natural circulation...

...M. H. M. Grooten; C. W. M. van der Geld When traditional air-to-air cooling is too voluminous, long thermosyphons may offer a way out. For safe operation of heat exchangers equipped with thermosyphons, the limiting heat flux q lim ″ is an important design parameter. Some literatures are found...

... nucleation two-phase flow vacuum deposition boiling extended surfaces subatmospheric pressure boiling enhancement thermosyphon electronic cooling bubble visualization Boiling curves of pool boiling on a plain copper surface at subatmospheric pressures of 2 kPa, 4 kPa, and 9 kPa...

...André Felippe Vieira da Cunha; Marcia B. H. Mantelli High temperature thermosyphons are devices designed to operate at temperatures above 400 ° C . They can be applied in many industrial applications, including heat recovery from high temperature air fluxes. After a short literature review, which...

...M. H. M. Grooten; C. W. M. van der Geld When traditional air-to-air cooling is too voluminous, heat exchangers with long thermosyphons offer a good alternative. Experiments with a single thermosyphon with a large length-to-diameter ratio (188) and filled with R-134a are presented and analyzed...

... is thought to be related to the geyser effect observed in thermosyphons. 09 10 2005 09 04 2006 mechanical stability heat pipes thermal management (packaging) heat transfer electron device manufacture heat pipe axial acceleration instability geyser effect thermosyphon...

... formation magnetic buoyancy force gravitational buoyancy force convection thermosyphon visualization numerical simulation The convection of fluid has been known to be affected by the magnetic field depending on its electroconductivity. The liquid metal has a large value...