An incompressible electrically conducting viscous fluid flow influenced by a local external magnetic field may develop vortical structures and eventually instabilities similar to those observed in flows around bluff bodies (such as circular cylinder), denominated magnetic obstacle. The present investigation analyzes numerically the three-dimensional flow and heat transfer around row of magnetic obstacles. The vortex structures of magnetic obstacles, heat transfer behaviors in the wake of magnetic obstacles, and flow resistance are analyzed at different Reynolds numbers. It shows that the flow behind magnetic obstacles contains four different regimes: (1) one pair of magnetic vortices, (2) three pairs namely, magnetic, connecting, and attached vortices, (3) smaller vortex shedding from the in-between magnetic obstacles, i.e., quasi-static, and (4) regular vortex shedding from the row of magnetic obstacles. Furthermore, downstream cross-stream mixing induced by the unstable wakes can enhance wall-heat transfer, and the maximum value of percentage heat transfer increment (HI) is equal to about 35%. In this case, the thermal performance factor is more than one.
Skip Nav Destination
Article navigation
Research-Article
Influence of Reynolds Numbers on the Flow and Heat Transfer Around Row of Magnetic Obstacles
Xidong Zhang,
Xidong Zhang
College of Energy and Power Engineering,
Nanjing Institute of Technology,
Nanjing 211167, China;
Nanjing Institute of Technology,
Nanjing 211167, China;
College of Astronautics,
Nanjing University of Aeronautics and
Astronautics,
Nanjing 210016, China
e-mail: zhangxd@nuaa.edu.cn
Nanjing University of Aeronautics and
Astronautics,
Nanjing 210016, China
e-mail: zhangxd@nuaa.edu.cn
Search for other works by this author on:
Guiping Zhu,
Guiping Zhu
College of Astronautics,
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Search for other works by this author on:
Yin Zhang,
Yin Zhang
College of Astronautics,
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Search for other works by this author on:
Hongyan Wang,
Hongyan Wang
College of Energy and Power Engineering,
Nanjing Institute of Technology,
Nanjing 211167, China
Nanjing Institute of Technology,
Nanjing 211167, China
Search for other works by this author on:
Hulin Huang
Hulin Huang
College of Astronautics,
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Search for other works by this author on:
Xidong Zhang
College of Energy and Power Engineering,
Nanjing Institute of Technology,
Nanjing 211167, China;
Nanjing Institute of Technology,
Nanjing 211167, China;
College of Astronautics,
Nanjing University of Aeronautics and
Astronautics,
Nanjing 210016, China
e-mail: zhangxd@nuaa.edu.cn
Nanjing University of Aeronautics and
Astronautics,
Nanjing 210016, China
e-mail: zhangxd@nuaa.edu.cn
Guiping Zhu
College of Astronautics,
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Yin Zhang
College of Astronautics,
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Hongyan Wang
College of Energy and Power Engineering,
Nanjing Institute of Technology,
Nanjing 211167, China
Nanjing Institute of Technology,
Nanjing 211167, China
Hulin Huang
College of Astronautics,
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
Nanjing University of Aeronautics
and Astronautics,
Nanjing 210016, China
1Corresponding author.
Presented at the 2016 ASME 5th Micro/Nanoscale Heat & Mass Transfer International Conference. Paper No. MNHMT2016-6455.
Contributed by the Heat Transfer Division of ASME for publication in the JOURNAL OF HEAT TRANSFER. Manuscript received May 29, 2016; final manuscript received February 12, 2017; published online March 7, 2017. Assoc. Editor: Chun Yang.
J. Heat Transfer. May 2017, 139(5): 051701 (6 pages)
Published Online: March 7, 2017
Article history
Received:
May 29, 2016
Revised:
February 12, 2017
Citation
Zhang, X., Zhu, G., Zhang, Y., Wang, H., and Huang, H. (March 7, 2017). "Influence of Reynolds Numbers on the Flow and Heat Transfer Around Row of Magnetic Obstacles." ASME. J. Heat Transfer. May 2017; 139(5): 051701. https://doi.org/10.1115/1.4036004
Download citation file:
Get Email Alerts
Cited By
Study on the Influence of Different Momentum Ratios on Cold and Hot Fluid Mixing and Thermal Stress in T-Tube
J. Heat Mass Transfer (July 2025)
A Proposed Universal Wall Function for Velocity and Temperature in Turbulent Near-Wall Flows of Low and High Prandtl Number Fluids
J. Heat Mass Transfer (July 2025)
Physics-Informed Proper Orthogonal Decomposition for Accurate and Superfast Prediction of Thermal Field
J. Heat Mass Transfer (July 2025)
Related Articles
Control of Vortex Shedding From a Bluff Body Using Imposed Magnetic Field
J. Fluids Eng (May,2007)
Analytical Analysis of Magneto-hydrodynamic (MHD) Transient Flow Past a Suddenly Started Infinite Vertical Plate With Thermal Radiation and Ramped Wall Temperature
J. Heat Transfer (April,2014)
Control of Wake Structure Behind a Square Cylinder by Magnetohydrodynamics
J. Fluids Eng (June,2015)
Laminar Forced Convection From a Circular Cylinder Placed in a Micropolar Fluid
J. Heat Transfer (March,2007)
Related Proceedings Papers
Related Chapters
Vortex-Induced Vibration
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook
Hydraulic Resistance
Heat Transfer & Hydraulic Resistance at Supercritical Pressures in Power Engineering Applications
Heat Transfer Enhancement by Using Nanofluids in Laminar Forced Convection Flows Considering Variable Properties
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)