The application of a recently formulated vapor transport theory to predict deposition rates of corrosive salts from alkali-seeded combustion gases of a small-capacity, high-velocity, atmospheric-pressure burner rig was hampered by the relatively large dimensions of the cylindrical deposit collector compared to the diameter of the combustion gas stream. The relative dimensions led to a highly nonadiabatic combustion gas flow around the collector and necessitated two series of experiments. In the first series, mass transfer coefficients were determined by utilizing the naphthalene sublimation technique. The second series of experiments determined the dilution effect on the sodium species concentrations due to the entrainment of ambient air. This second series involved the measurement of the temperature variation along the surface of the collector under steady-state conditions. Vapor deposition rates were determined exploiting this information and the results were found to compare favorably with experimentally obtained rates.
Skip Nav Destination
Article navigation
Research Papers
Experiments for the Determination of Convective Diffusion Heat/Mass Transfer to Burner Rig Test Targets Comparable in Size to Jet Stream Diameter
G. J. Santoro,
G. J. Santoro
NASA Lewis Research Center, Cleveland, OH 44135
Search for other works by this author on:
S. A. Go¨kog˘lu
S. A. Go¨kog˘lu
NASA Lewis Research Center, Cleveland, OH 44135
Search for other works by this author on:
G. J. Santoro
NASA Lewis Research Center, Cleveland, OH 44135
S. A. Go¨kog˘lu
NASA Lewis Research Center, Cleveland, OH 44135
J. Heat Transfer. May 1988, 110(2): 442-448 (7 pages)
Published Online: May 1, 1988
Article history
Received:
September 5, 1986
Online:
October 20, 2009
Citation
Santoro, G. J., and Go¨kog˘lu, S. A. (May 1, 1988). "Experiments for the Determination of Convective Diffusion Heat/Mass Transfer to Burner Rig Test Targets Comparable in Size to Jet Stream Diameter." ASME. J. Heat Transfer. May 1988; 110(2): 442–448. https://doi.org/10.1115/1.3250505
Download citation file:
Get Email Alerts
Cited By
On Prof. Roop Mahajan's 80th Birthday
J. Heat Mass Transfer
Thermal Hydraulic Performance and Characteristics of a Microchannel Heat Exchanger: Experimental and Numerical Investigations
J. Heat Mass Transfer (February 2025)
Related Articles
Heat and Mass Transfer With Dehumidification in Laminar Boundary Layer Flow Along a Cooled Flat Plate
J. Heat Transfer (August,1993)
Numerical Simulation of Evaporating Two-Phase Flow in a High-Aspect-Ratio Microchannel with Bends
J. Heat Transfer (August,2017)
Combined Buoyancy Effects of Thermal and Mass Diffusion on Laminar Mixed Convection in Vertical and Horizontal Semicircular Ducts
J. Heat Transfer (September,2016)
Study on Sublimation Phenomenon of Horizontal Frost Layer Exposed to Forced Convection Air Flow and Radiant Heat
J. Heat Transfer (August,1996)
Related Proceedings Papers
Related Chapters
Introduction
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Laminar Fluid Flow and Heat Transfer
Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine
Evaluation of Moisture Accumulation in Composite Roof Decks in High Humidity Environments such as Natatoriums in Cold Climates Using Hygrothermal Modeling
Roofing Research and Standards Development: 10th Volume