... methodology using the CFD solver ANSYS Fluent to accurately predict the conjugate heat transfer in the stator well area. The validation of the methodology relies on thorough comparison of the results with the MAGPI WP1 experimental temperature/pressure measurements. A geometry with axial cooling injection...

... the piston cooling jet (PCJ), which is common in modern engines. Considerable research has been undertaken to identify generalized engine heat transfer correlations and to predict piston and cylinder wall surface temperatures during operation. Most of these correlations require in-cylinder combustion...

... capabilities for predicting flow and heat transfer inside rotating disk cavities. The Boussinesq approximation was implemented for modeling centrifugally buoyant flow and heat transfer in the rotating cavity with axial throughflow. This is validated using recent experimental data and CFD results. Good...

... the seal has a large impact on the temperature distribution, therefore a thermal design is needed to stay below the seal allowable temperature; this requirement has been even amplified in the last years with the DGS application to hot turbomachinery. Nowadays, numerical conjugate heat transfer (CHT...

... 10 2023 CFD–FEA coupling computational fluid dynamics finite element analysis heat transfer ignition assistant thermomechanical stress Turbocharged direct injection compression ignition (CI) engines can benefit aircraft due to their fuel efficiency, power density, and reliability...

...Zixiang Sun; Feng Gao; John W. Chew; Dario Amirante Flow and heat transfer in axial compressor disk cavities involve strong interaction of axial throughflow at the disk bores with centrifugal buoyant flow in the cavities. This paper presents large eddy simulation (LES) of flow and heat transfer...

... have also studied thermal effects during interactions [ 14 , 15 ]. All these investigations show the continued effort toward the understanding of contact interaction phenomena. rotor–stator contact interaction vibration analysis heat transfer frictional heating Copyright © 2021 by ASME...

..., and investigated the flow and heat transfer characteristics in this alternating elliptical U-bend cooling channel thoroughly. Numerical simulations were performed by using three-dimensional steady solver of Reynolds-averaged Navier–Stokes equations with the standard k– ε turbulence model. The influence...

... its temperature characteristic and level. On the one hand, a numerical conjugate heat transfer (CHT) model of the automotive turbocharger investigated is developed using a commercial CFD-tool and a bidirectional, thermal coupling of the CFD-model with thermohydrodynamic lubrication simulation codes...

...-axis and the horizontal semi-axis are applied. Numerical studies are carried out under three Reynolds numbers. The flow characteristics and heat transfer performance of five DSC cases are compared with the benchmark impingement cooling case. The flow losses, cross-flow development, generated vortices...

.... Considerable improvements of the computing power and numerical simulation tools today allow detailed investigations of the heat transfer and the flow phenomena by conjugate-heat-transfer (CHT) simulations. However, these simulations are still restricted to smaller geometries mostly by the number of elements...

... knowledge about the dominant heat transfer phenomena and flow structures, detailed numerical investigations are required. For the sake of the investigation of the warm-keeping process as found in the presented research, single and multistage numerical turbine models were developed. Furthermore...

... and Larger Eddy Simulation of Turbulent Channel Flows ,” Encyclopedia of Fluid Mechanics, West Orange , NJ, pp. 1337 – 1391 . [21] Schmitt , P. , Poinsot , T. , Schuermans , B. , and Geigle , K. P. , 2007 , “ Large-Eddy Simulation and Experimental Study of Heat Transfer, Nitric Oxide...

... emissions. Between these two regions there are competing effects which result in relatively constant NO x . Energy Energy conversion Engines Experimental Fuel combustion Fuels Heat transfer Internal combustion engines Natural gas technology Petroleum engineering Thermodynamics Combustion...

... recovery and heat transfer effects cause a shortfall between the measured temperature and the flow stagnation temperature. To improve accuracy, the measurement shortfall is corrected post-test using data acquired at representative Mach numbers in a steady aerodynamic calibration facility. However, probes...

.... Excessive use of the secondary air results in a parasitic loss to the thermodynamic cycle of the engine so efficient use of the air is necessary to maintain efficiency. Convective heat transfer Engines Experimental Heat transfer Internal flow Mass Transfer Turbines Copyright © 2018...

... OF E NGINEERING FOR G AS T URBINES AND P OWER . Manuscript received August 23, 2017; final manuscript received September 23, 2017; published online July 5, 2018. Editor: David Wisler. 23 08 2017 23 09 2017 Engines Experimental Fouling Heat transfer Particle deposition...

..., heat transfer from the cylinder, short circuiting, sensible exhaust enthalpy, and incomplete combustion. The engine controls considered in the present study are speed, equivalence ratio, combustion phasing (ignition timing), cooling-air flow rate, and throttle. Several options are identified...

... is done with experimental results, a one-dimensional model is also used to calculate turbulence intensities with respect to geometric factors; these results help to explain observed differences in heat transfer characteristics of the two engines. The results are compared at the same brake mean effective...

.../gtcc_igcc.html [31] Incropera , F. P. , 2011 , Introduction to Heat Transfer , Wiley , Hoboken, NJ. [32] Min , J. K. , Jeong , J. H. , Ha , M. Y. , and Kim , K. S. , 2009 , “ High Temperature Heat Exchanger Studies for Applications to Gas Turbines ,” Heat Mass Transfer , 46...