Volume 102 Issue 3 | J. Eng. Gas Turbines Power

Skip Nav Destination

Volume 102, Issue 3

July 1980

This article was originally published in

Journal of Engineering for Power

ISSN 0022-0825

Research Papers

Production of Photovoltaic Devices

R. McGinnis

J. Eng. Power. July 1980, 102(3): 513–517. doi: https://doi.org/10.1115/1.3230293

Abstract

View articletitled, Production of Photovoltaic Devices

Open the PDF for in another window

Topics: Finishes , Manufacturing , Quartz , Silicon , Solar cells

Designing Reliability into High-Effectiveness Industrial Gas Turbine Regenerators

S. J. Valentino

J. Eng. Power. July 1980, 102(3): 518–523. doi: https://doi.org/10.1115/1.3230294

Abstract

View articletitled, Designing Reliability into High-Effectiveness Industrial Gas Turbine Regenerators

Open the PDF for in another window

Topics: Design , Industrial gases , Reliability , Turbines , Fuels , Testing , Cycles , Gas turbines , Temperature

Account of Film Turbulence for Predicting Film Cooling Effectiveness in Gas Turbine Combustors

G. J. Sturgess

J. Eng. Power. July 1980, 102(3): 524–534. doi: https://doi.org/10.1115/1.3230295

Abstract

View articletitled, Account of Film Turbulence for Predicting Film Cooling Effectiveness in Gas Turbine Combustors

Open the PDF for in another window

Topics: Combustion chambers , Film cooling , Gas turbines , Turbulence , Coolants , Geometry , Combustion systems , Cooling , Design , Durability

Mean Velocity and Decay Characteristics of the Near and Far-Wake of a Compressor Rotor Blade of Moderate Loading

A. Ravindranath, B. Lakshminarayana

J. Eng. Power. July 1980, 102(3): 535–547. doi: https://doi.org/10.1115/1.3230296

Abstract

View articletitled, Mean Velocity and Decay Characteristics of the Near and Far-Wake of a Compressor Rotor Blade of Moderate Loading

Open the PDF for in another window

Topics: Blades , Compressors , Rotors , Wakes , Pressure , Probes , Sensors , Wake turbulence , Wire

Ongoing Development of a Low Emission Industrial Gas Turbine Combustion Chamber

V. M. Sood, J. R. Shekleton

J. Eng. Power. July 1980, 102(3): 549–554. doi: https://doi.org/10.1115/1.3230299

Abstract

View articletitled, Ongoing Development of a Low Emission Industrial Gas Turbine Combustion Chamber

Open the PDF for in another window

Topics: Combustion chambers , Emissions , Industrial gases , Turbines , Fuels , Combustion , Pressure , Combustion systems , Engines , Cooling

An Approximate Analysis of Foundation Stresses in Horizontal Pressure Vessels

Krishna P. Singh, V. K. Luk

J. Eng. Power. July 1980, 102(3): 555–557. doi: https://doi.org/10.1115/1.3230300

Abstract

View articletitled, An Approximate Analysis of Foundation Stresses in Horizontal Pressure Vessels

Open the PDF for in another window

Topics: Pressure vessels , Stress , Computation , Concretes , Design , Geometry , Pressure , Vessels

Simplified Inelastic Analysis in Helical Coil Heat Exchanger Design

C. E. Richard

J. Eng. Power. July 1980, 102(3): 558–562. doi: https://doi.org/10.1115/1.3230301

Abstract

View articletitled, Simplified Inelastic Analysis in Helical Coil Heat Exchanger Design

Open the PDF for in another window

Topics: Design , Heat exchangers , Inelastic analysis , Stress , Creep , Cycles , Damage , Fatigue , High temperature , Tubing

An IHX Design for Pool Type LMFBR System Application

D. D. DeFur

J. Eng. Power. July 1980, 102(3): 563–567. doi: https://doi.org/10.1115/1.3230302

Abstract

View articletitled, An IHX Design for Pool Type LMFBR System Application

Open the PDF for in another window

Topics: Design , Liquid metal fast breeder reactors , Flow (Dynamics) , Shells , Pressure drop , Sodium , Transients (Dynamics) , Buckling , Compression , Heat

A High Reliability Straight Tube LMFBR Steam Generator Design

A. H. Spring, D. D. DeFur

J. Eng. Power. July 1980, 102(3): 568–572. doi: https://doi.org/10.1115/1.3230303

Abstract

View articletitled, A High Reliability Straight Tube LMFBR Steam Generator Design

Open the PDF for in another window

Topics: Boilers , Design , Liquid metal fast breeder reactors , Reliability , Bellows (Equipment) , Manufacturing , Shells , Thermal expansion , Welded joints

Fiber Reinforced Metals in Turbine Blades

L. O. K. Larsson, R. Warren

J. Eng. Power. July 1980, 102(3): 573–578. doi: https://doi.org/10.1115/1.3230304

Abstract

View articletitled, Fiber Reinforced Metals in Turbine Blades

Open the PDF for in another window

Topics: Fibers , Metals , Turbine blades , Composite materials , Wire , Alloys , Blades , Fatigue , Hot pressing , Manufacturing

The Behavior of a Closed-Cycle Gas Turbine with Time Dependent Operating Conditions

K. Bammert, H. Poesentrup

J. Eng. Power. July 1980, 102(3): 579–583. doi: https://doi.org/10.1115/1.3230305

Abstract

View articletitled, The Behavior of a Closed-Cycle Gas Turbine with Time Dependent Operating Conditions

Open the PDF for in another window

Topics: Closed-cycle gas turbines , Cycles , Flow (Dynamics) , Heat , Heat transfer , Pipes , Reliability , Solar energy , Steady state , Temperature

The Flow and Film Cooling Effectiveness Following Injection through a Row of Holes

N. W. Foster, D. Lampard

J. Eng. Power. July 1980, 102(3): 584–588. doi: https://doi.org/10.1115/1.3230306

Abstract

View articletitled, The Flow and Film Cooling Effectiveness Following Injection through a Row of Holes

Open the PDF for in another window

Topics: Film cooling , Flow (Dynamics) , Boundary layers , Cooling , Mass transfer , Wind tunnels

Plasma-Spray Coating Processes: Physico-Mathematical Characterization

B. Gal-Or

J. Eng. Power. July 1980, 102(3): 589–593. doi: https://doi.org/10.1115/1.3230307

Abstract

View articletitled, Plasma-Spray Coating Processes: Physico-Mathematical Characterization

Open the PDF for in another window

Topics: Coating processes , Plasmas (Ionized gases) , Sprays , Errors , Evaporation , Particulate matter , Temperature , Coatings , Differential equations , Dynamics (Mechanics)

Matching of Turbocomponents Described by the Example of Impeller and Diffuser in a Centrifugal Compressor: Part I—Aerothermodynamic Coupling of Impeller and Diffuser. Part II—Optimized Stage Efficiency of a Centrifugal Compressor

K. Bammert, M. Rautenberg, W. Wittekindt

J. Eng. Power. July 1980, 102(3): 594–600. doi: https://doi.org/10.1115/1.3230308

Abstract

View articletitled, Matching of Turbocomponents Described by the Example of Impeller and Diffuser in a Centrifugal Compressor: Part I—Aerothermodynamic Coupling of Impeller and Diffuser. Part II—Optimized Stage Efficiency of a Centrifugal Compressor

Open the PDF for in another window

Topics: Compressors , Diffusers , Impellers , Design , Machinery , Optimization , Turbochargers , Vaneless diffusers

The Film Cooling Effectiveness of Double Rows of Holes

W. O. Afejuku, N. Hay, D. Lampard

J. Eng. Power. July 1980, 102(3): 601–606. doi: https://doi.org/10.1115/1.3230309

Abstract

View articletitled, The Film Cooling Effectiveness of Double Rows of Holes

Open the PDF for in another window

Topics: Film cooling , Design , Coolants , Flow (Dynamics) , Mass transfer , Safety

A Fiber-Optic Laser-Doppler Probe for Vibration Analysis of Rotating Machines

R. A. Cookson, P. Bandyopadhyay

J. Eng. Power. July 1980, 102(3): 607–612. doi: https://doi.org/10.1115/1.3230310

Abstract

View articletitled, A Fiber-Optic Laser-Doppler Probe for Vibration Analysis of Rotating Machines

Open the PDF for in another window

Topics: Fibers , Lasers , Machinery , Probes , Vibration analysis , Blades , Cantilevers , Disks , Rotation

Conceptual Examination of Gas Phase Particulate Formation in Gas Turbine Combustors

A. S. Kesten, J. J. Sangiovanni, P. Goldberg

J. Eng. Power. July 1980, 102(3): 613–618. doi: https://doi.org/10.1115/1.3230311

Abstract

View articletitled, Conceptual Examination of Gas Phase Particulate Formation in Gas Turbine Combustors

Open the PDF for in another window

Topics: Combustion chambers , Gas turbines , Particulate matter , Drops , Combustion , Fuels , Soot , Chemistry , Combustion systems , Pyrolysis

An Analysis of Three-Dimensional Flow in a Centrifugal Compressor Impeller

C. Bosman

J. Eng. Power. July 1980, 102(3): 619–625. doi: https://doi.org/10.1115/1.3230312

Abstract

View articletitled, An Analysis of Three-Dimensional Flow in a Centrifugal Compressor Impeller

Open the PDF for in another window

Topics: Compressor impellers , Flow (Dynamics) , Blades , Vortices , Computational methods , Kinematics , Rotation

Application of Viscous Analyses to the Design of Jet Exhaust Powered Lift Installations

E. Tjonneland, S. F. Birch

J. Eng. Power. July 1980, 102(3): 626–631. doi: https://doi.org/10.1115/1.3230313

Abstract

View articletitled, Application of Viscous Analyses to the Design of Jet Exhaust Powered Lift Installations

Open the PDF for in another window

Topics: Design , Exhaust systems , Flow (Dynamics) , Numerical analysis , Turbulence

A Blade-to-Blade Solution of the Flow in a Centrifugal Compressor Impeller with Splitters

A. Goulas

J. Eng. Power. July 1980, 102(3): 632–637. doi: https://doi.org/10.1115/1.3230314

Abstract

View articletitled, A Blade-to-Blade Solution of the Flow in a Centrifugal Compressor Impeller with Splitters

Open the PDF for in another window

Topics: Blades , Compressor impellers , Flow (Dynamics) , Impellers , Boundary layers , Geometry , Suction

Interferometrically Measured Aerodynamic Forces on a Vibrating Turbine Blade Group

Z. Kovats

J. Eng. Power. July 1980, 102(3): 638–644. doi: https://doi.org/10.1115/1.3230315

Abstract

View articletitled, Interferometrically Measured Aerodynamic Forces on a Vibrating Turbine Blade Group

Open the PDF for in another window

Topics: Aerodynamics , Fluid-dynamic forces , Turbine blades , Blades , Pressure , Vibration , Cycles , Flow (Dynamics) , Air flow , Drag (Fluid dynamics)

The Prediction of Sauter Mean Diameter for Gas Turbine Fuel Nozzles of Different Types

H. C. Simmons

J. Eng. Power. July 1980, 102(3): 646–652. doi: https://doi.org/10.1115/1.3230318

Abstract

View articletitled, The Prediction of Sauter Mean Diameter for Gas Turbine Fuel Nozzles of Different Types

Open the PDF for in another window

Topics: Fuels , Gas turbines , Nozzles , Bridges (Structures) , Dimensions , Modeling , Pressure , Surface mount devices

Effects of Nonuniform Passages on Compact Heat Exchanger Performance

R. K. Shah, A. L. London

J. Eng. Power. July 1980, 102(3): 653–659. doi: https://doi.org/10.1115/1.3230319

Abstract

View articletitled, Effects of Nonuniform Passages on Compact Heat Exchanger Performance

Open the PDF for in another window

Topics: Heat exchangers , Laminar flow , Fluids , Friction , Heat transfer , Manufacturing , Pressure drop , Wall temperature

Techniques for the Thermal/Hydraulic Analysis of LMFBR Check Valves

S. M. Cho, R. S. Kane

J. Eng. Power. July 1980, 102(3): 660–665. doi: https://doi.org/10.1115/1.3230322

Abstract

View articletitled, Techniques for the Thermal/Hydraulic Analysis of LMFBR Check Valves

Open the PDF for in another window

Topics: Liquid metal fast breeder reactors , Valves , Flow (Dynamics) , Heat transfer , Shapes , Sodium , Stress analysis (Engineering) , Temperature , Thermal analysis , Thermal stresses

Laboratory Combustibility Testing of Solid Fuel

E. C. Winegartner, C. J. Lin

J. Eng. Power. July 1980, 102(3): 666–671. doi: https://doi.org/10.1115/1.3230323

Abstract

View articletitled, Laboratory Combustibility Testing of Solid Fuel

Open the PDF for in another window

Topics: Fuels , Testing , Wall temperature , Boilers , Furnaces , Carbon , Coal , Drilling , Firing , Flames

Characterization and Combustion of SRC II Fuel Oil

W. Downs, S. J. Vecci, J. A. Barsin, W. C. Rovesti

J. Eng. Power. July 1980, 102(3): 672–678. doi: https://doi.org/10.1115/1.3230324

Abstract

View articletitled, Characterization and Combustion of SRC II Fuel Oil

Open the PDF for in another window

Topics: Combustion , Fuel oils , Fuels , Nitrogen oxides , Coal , Emissions , Nitrogen , Petroleum

Some Results of the Wetting and Adherence of Synthetic Coal Ash Droplets on Steel

A. K. Moza, L. G. Austin, R. E. Tressler

J. Eng. Power. July 1980, 102(3): 679–683. doi: https://doi.org/10.1115/1.3230325

Abstract

View articletitled, Some Results of the Wetting and Adherence of Synthetic Coal Ash Droplets on Steel

Open the PDF for in another window

Topics: Coal , Drops , Steel , Wetting , Temperature , Adhesion , Glass , Minerals , Boilers , Freezing

Further Development of an Advanced Low-NO_x Combustion System and its Potential Application to Coal-Fired Utility Boilers

T. M. Sommer, S. A. Johnson, G. D. Lindstrom

J. Eng. Power. July 1980, 102(3): 684–691. doi: https://doi.org/10.1115/1.3230326

Abstract

View articletitled, Further Development of an Advanced Low-NO<sub>x</sub> Combustion System and its Potential Application to Coal-Fired Utility Boilers

Open the PDF for in another window

Topics: Boilers , Coal , Combustion systems , Design , Emissions , Nitrogen oxides , Electricity (Physics) , Engineering prototypes , Testing

Composition and Microstructure of a Furnace Ash Deposit from a Coal-Fired Utility Boiler

R. R. Fessler, A. J. Skidmore, H. R. Hazard, J. P. Dimmer

J. Eng. Power. July 1980, 102(3): 692–697. doi: https://doi.org/10.1115/1.3230327

Abstract

View articletitled, Composition and Microstructure of a Furnace Ash Deposit from a Coal-Fired Utility Boiler

Open the PDF for in another window

Topics: Boilers , Coal , Furnaces , Particulate matter , Temperature , Iron , Low temperature , Melting , Sulfur , X-ray analysis

Corrosion and Deposits from Combustion of Solid Waste—Part VII: Coincineration of Refuse and Sewage Sludge

H. H. Krause, P. W. Cover, W. E. Berry, R. A. Olexsey

J. Eng. Power. July 1980, 102(3): 698–705. doi: https://doi.org/10.1115/1.3230328

Abstract

View articletitled, Corrosion and Deposits from Combustion of Solid Waste—Part VII: Coincineration of Refuse and Sewage Sludge

Open the PDF for in another window

Topics: Combustion , Corrosion , Sewage , Solid wastes , Temperature , Alloys , Metals , Probes , Stainless steel , Steel

The Influence of Liquid Film Thickness on Airblast Atomization

N. K. Rizk, A. H. Lefebvre

J. Eng. Power. July 1980, 102(3): 706–710. doi: https://doi.org/10.1115/1.3230329

Abstract

View articletitled, The Influence of Liquid Film Thickness on Airblast Atomization

Open the PDF for in another window

Topics: Liquid films , Film thickness , Design , Diluents , Ducts , Flow (Dynamics) , Fuels , Light scattering , Needles , Surface mount devices

The Base Pressure Problem in Transonic Turbine Cascades

C. H. Sieverding, M. Stanislas, J. Snoeck

J. Eng. Power. July 1980, 102(3): 711–718. doi: https://doi.org/10.1115/1.3230330

View articletitled, The Base Pressure Problem in Transonic Turbine Cascades

Open the PDF for in another window

Topics: Pressure , Turbines

Waste Heat Disposal to Air with Mechanical and Natural Draft—Some Analytical Design Considerations

Ali Montakhab

J. Eng. Power. July 1980, 102(3): 719–727. doi: https://doi.org/10.1115/1.3230331

Abstract

View articletitled, Waste Heat Disposal to Air with Mechanical and Natural Draft—Some Analytical Design Considerations

Open the PDF for in another window

Topics: Analytical design , Cooling , Cooling towers , Design , Evaporative cooling , Heat transfer , Power stations , Waste heat

Status of Centrifugal Impeller Internal Aerodynamics—Part I: Inviscid Flow Prediction Methods

D. Adler

J. Eng. Power. July 1980, 102(3): 728–737. doi: https://doi.org/10.1115/1.3230332

Abstract

View articletitled, Status of Centrifugal Impeller Internal Aerodynamics—Part I: Inviscid Flow Prediction Methods

Open the PDF for in another window

Topics: Aerodynamics , Impellers , Inviscid flow , Flow (Dynamics) , Internal flow

Status of Centrifugal Impeller Internal Aerodynamics—Part II: Experiments and Influence of Viscosity

D. Adler

J. Eng. Power. July 1980, 102(3): 738–746. doi: https://doi.org/10.1115/1.3230333

Abstract

View articletitled, Status of Centrifugal Impeller Internal Aerodynamics—Part II: Experiments and Influence of Viscosity

Open the PDF for in another window

Topics: Aerodynamics , Impellers , Viscosity , Flow (Dynamics) , Turbulence , Viscous flow

Discussions

Discussion: “Mean Velocity and Decay Characteristics of the Near and Far-Wake of a Compressor Rotor Blade of Moderate Loading” (Ravindranath, A., and Lakshminarayana, B., 1980, ASME J. Eng. Power, 102, pp. 535–547)

T. H. Okiishi

J. Eng. Power. July 1980, 102(3): 547–548. doi: https://doi.org/10.1115/1.3230297

View articletitled, Discussion: “Mean Velocity and Decay Characteristics of the Near and Far-Wake of a Compressor Rotor Blade of Moderate Loading” (Ravindranath, A., and Lakshminarayana, B., 1980, ASME J. Eng. Power, 102, pp. 535–547)

Open the PDF for in another window

Topics: Blades , Compressors , Rotors , Wakes

Closure to “Discussion of ‘Mean Velocity and Decay Characteristics of the Near and Far-Wake of a Compressor Rotor Blade of Moderate Loading’” (1980, ASME J. Eng. Power, 102, pp. 547–548)

A. Ravindranath, B. Lakshminarayana

J. Eng. Power. July 1980, 102(3): 548. doi: https://doi.org/10.1115/1.3230298

View articletitled, Closure to “Discussion of ‘Mean Velocity and Decay Characteristics of the Near and Far-Wake of a Compressor Rotor Blade of Moderate Loading’” (1980, ASME J. Eng. Power, 102, pp. 547–548)

Open the PDF for in another window

Topics: Blades , Compressors , Rotors , Wakes

Discussion: “Interferometrically Measured Aerodynamic Forces on a Vibrating Turbine Blade Group” (Kovats, Z., 1980, ASME J. Eng. Power, 102, pp. 638–644)

F. Sisto

J. Eng. Power. July 1980, 102(3): 644. doi: https://doi.org/10.1115/1.3230316

View articletitled, Discussion: “Interferometrically Measured Aerodynamic Forces on a Vibrating Turbine Blade Group” (Kovats, Z., 1980, ASME J. Eng. Power, 102, pp. 638–644)

Open the PDF for in another window

Topics: Aerodynamics , Fluid-dynamic forces , Turbine blades

Closure to “Discussion of ‘Interferometrically Measured Aerodynamic Forces on a Vibrating Turbine Blade Group’” (1980, ASME J. Eng. Power, 102, p. 644)

Z. Kovats

J. Eng. Power. July 1980, 102(3): 645. doi: https://doi.org/10.1115/1.3230317

View articletitled, Closure to “Discussion of ‘Interferometrically Measured Aerodynamic Forces on a Vibrating Turbine Blade Group’” (1980, ASME J. Eng. Power, 102, p. 644)

Open the PDF for in another window

Topics: Aerodynamics , Fluid-dynamic forces , Turbine blades

Discussion: “Effects of Nonuniform Passages on Compact Heat Exchanger Performance” (Shah, R. K., and London, A. L., 1980, ASME J. Eng. Power, 102, pp. 653–659)

J. R. Mondt

J. Eng. Power. July 1980, 102(3): 659. doi: https://doi.org/10.1115/1.3230320

View articletitled, Discussion: “Effects of Nonuniform Passages on Compact Heat Exchanger Performance” (Shah, R. K., and London, A. L., 1980, ASME J. Eng. Power, 102, pp. 653–659)

Open the PDF for in another window

Topics: Heat exchangers

Closure to “Discussion of ‘Effects of Nonuniform Passages on Compact Heat Exchanger Performance’” (1980, ASME J. Eng. Power, 102, p. 659)

R. K. Shah, A. L. London

J. Eng. Power. July 1980, 102(3): 659. doi: https://doi.org/10.1115/1.3230321

View articletitled, Closure to “Discussion of ‘Effects of Nonuniform Passages on Compact Heat Exchanger Performance’” (1980, ASME J. Eng. Power, 102, p. 659)

Open the PDF for in another window

Topics: Heat exchangers

Issues

Research Papers

Discussions

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only