This paper is focused on the performance of the 1 MW plant designed and developed by Rolls-Royce Fuel Cell Systems Limited. The system consists of a two stage turbogenerator coupled with pressure vessels containing the fuel cell stack, internal reformer, cathode ejector, anode ejector, and off-gas burner. While the overall scheme is relatively simple, due to the limited number of components, the interaction between the components is complex and the system behavior is determined by many parameters. In particular, two important subsystems such as the cathode and the anode recycle loops must be carefully analyzed also considering their interaction with and influence on the turbogenerator performance. The system performance model represents the whole, and each physical component is modeled in detail as a subsystem. The component models have been validated or are under verification. The model provides all the operating parameters in each characteristic point of the plant and a complete distribution of thermodynamics and chemical parameters inside the solid oxide fuel cell (SOFC) stack and reformer. In order to characterize the system behavior, its operating envelope has been calculated taking into account the effect of ambient temperature and pressure, as described in the paper. Given the complexity of the system, various constraints have to be considered in order to obtain a safe operating condition not only for the system as a whole but also for each of its parts. In particular each point calculated has to comply with several constraints such as stack temperature distribution, maximum and minimum temperatures, and high and low pressure spool maximum rotational speeds. The model developed and the results presented in the paper provide important information for the definition of an appropriate control strategy and a first step in the development of a robust and optimized control system.
Skip Nav Destination
Article navigation
February 2011
Research Papers
Modeling and Performance Analysis of the Rolls-Royce Fuel Cell Systems Limited: 1 MW Plant
Francesco Trasino,
Francesco Trasino
Rolls-Royce Fuel Cell Systems Limited
, Loughborough LE11 3GR, UK
Search for other works by this author on:
Michele Bozzolo,
Michele Bozzolo
Rolls-Royce Fuel Cell Systems Limited
, Loughborough LE11 3GR, UK
Search for other works by this author on:
Loredana Magistri,
Loredana Magistri
Thermochemical Power Group (TPG), Dipartimento di Macchine, Sistemi Energetici e Trasporti,
Università di Genova
, Via Montallegro 1, 16145, Genova, Italy
Search for other works by this author on:
Aristide F. Massardo
Aristide F. Massardo
Thermochemical Power Group (TPG), Dipartimento di Macchine, Sistemi Energetici e Trasporti,
Università di Genova
, Via Montallegro 1, 16145, Genova, Italy
Search for other works by this author on:
Francesco Trasino
Rolls-Royce Fuel Cell Systems Limited
, Loughborough LE11 3GR, UK
Michele Bozzolo
Rolls-Royce Fuel Cell Systems Limited
, Loughborough LE11 3GR, UK
Loredana Magistri
Thermochemical Power Group (TPG), Dipartimento di Macchine, Sistemi Energetici e Trasporti,
Università di Genova
, Via Montallegro 1, 16145, Genova, Italy
Aristide F. Massardo
Thermochemical Power Group (TPG), Dipartimento di Macchine, Sistemi Energetici e Trasporti,
Università di Genova
, Via Montallegro 1, 16145, Genova, ItalyJ. Eng. Gas Turbines Power. Feb 2011, 133(2): 021701 (11 pages)
Published Online: October 25, 2010
Article history
Received:
May 6, 2009
Revised:
October 28, 2009
Online:
October 25, 2010
Published:
October 25, 2010
Citation
Trasino, F., Bozzolo, M., Magistri, L., and Massardo, A. F. (October 25, 2010). "Modeling and Performance Analysis of the Rolls-Royce Fuel Cell Systems Limited: 1 MW Plant." ASME. J. Eng. Gas Turbines Power. February 2011; 133(2): 021701. https://doi.org/10.1115/1.4000600
Download citation file:
Get Email Alerts
An Experimental Comparison of Methanol Combustion Strategies: Spark Ignition Versus Compression Ignition
J. Eng. Gas Turbines Power
Systems-Based Approach To Predicting Tbc Delamination Due To Cmas Infiltration
J. Eng. Gas Turbines Power
Related Articles
Diurnal Temperature and Pressure Effects on Axial Turbomachinery Stability in Solid Oxide Fuel Cell-Gas Turbine Hybrid Systems
J. Fuel Cell Sci. Technol (June,2011)
MGT/HTFC Hybrid System Emulator Test Rig: Experimental Investigation on the Anodic Recirculation System
J. Fuel Cell Sci. Technol (April,2011)
Comparison of Preanode and Postanode Carbon Dioxide Separation for IGFC Systems
J. Eng. Gas Turbines Power (June,2010)
Parametric Thermodynamic Analysis of a Solid Oxide Fuel Cell Gas Turbine System Design Space
J. Eng. Gas Turbines Power (July,2010)
Related Proceedings Papers
Related Chapters
Front Matter
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1 Sixth Edition
Front Matter
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 2, Sixth Edition
New Guidelines on Assessing the Risk of Fatigue Failure and Remaining Life of Ageing Pressure Vessels:
Ageing and Life Extension of Offshore Facilities