Auxiliary bearings are used to prevent rotor/stator contact in active magnetic bearing systems. They are sacrificial components providing a physical limit on the rotor displacement. During rotor/auxiliary bearing contact significant forces normal to the contact zone may occur. Furthermore, rotor slip and rub can lead to localized frictional heating. Linear control strategies may also become ineffective or induce instability due to changes in rotordynamic characteristics during contact periods. This work considers the concept of using actively controlled auxiliary bearings in magnetic bearing systems. Auxiliary bearing controller design is focused on attenuating bearing vibration resulting from contact and reducing the contact forces. Controller optimization is based on the norm with appropriate weighting functions applied to the error and control signals. The controller is assessed using a simulated rotor/magnetic bearing system. Comparison of the performance of an actively controlled auxiliary bearing is made with that of a resiliently mounted auxiliary bearing. Rotor drop tests, repeated contact tests, and sudden rotor unbalance resulting in trapped contact modes are considered.
Skip Nav Destination
Article navigation
March 2009
Research Papers
On the Use of Actively Controlled Auxiliary Bearings in Magnetic Bearing Systems
Iain S. Cade,
Iain S. Cade
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY, UK
Search for other works by this author on:
M. Necip Sahinkaya,
M. Necip Sahinkaya
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY, UK
Search for other works by this author on:
Clifford R. Burrows,
Clifford R. Burrows
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY, UK
Search for other works by this author on:
Patrick S. Keogh
Patrick S. Keogh
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY, UK
Search for other works by this author on:
Iain S. Cade
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY, UK
M. Necip Sahinkaya
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY, UK
Clifford R. Burrows
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY, UK
Patrick S. Keogh
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY, UKJ. Eng. Gas Turbines Power. Mar 2009, 131(2): 022507 (10 pages)
Published Online: December 24, 2008
Article history
Received:
April 8, 2008
Revised:
July 24, 2008
Published:
December 24, 2008
Citation
Cade, I. S., Sahinkaya, M. N., Burrows, C. R., and Keogh, P. S. (December 24, 2008). "On the Use of Actively Controlled Auxiliary Bearings in Magnetic Bearing Systems." ASME. J. Eng. Gas Turbines Power. March 2009; 131(2): 022507. https://doi.org/10.1115/1.2982159
Download citation file:
Get Email Alerts
Cited By
Blade Excitation Alleviation of a Nozzleless Radial Turbine by Casing Treatment Based on Reduced Order Mode
J. Eng. Gas Turbines Power
Design And Testing of a Compact, Reverse Brayton Cycle, Air (R729) Cooling Machine
J. Eng. Gas Turbines Power
Experimental Study on Liquid Jet Trajectory in Cross Flow of Swirling Air at Elevated Pressure Condition
J. Eng. Gas Turbines Power
Related Articles
Magnetic Bearing Using Rotation Magnetized Direction Configuration
J. Tribol (October,2015)
An Active Auxiliary Bearing Control Strategy to Reduce the Onset of Asynchronous Periodic Contact Modes in Rotor/Magnetic Bearing Systems
J. Eng. Gas Turbines Power (May,2010)
Exploration of NDE Properties of AMB Supported Rotors for Structural Damage Detection
J. Eng. Gas Turbines Power (October,2011)
Related Proceedings Papers
Related Chapters
Introduction
Design of Mechanical Bearings in Cardiac Assist Devices
Real Time Application of an Active Magnetic Bearing Controlled with MLP
Intelligent Engineering Systems through Artificial Neural Networks, Volume 20
Magnetic Bearings for Assist Devices
Magnetic Bearings for Mechanical Cardiac Assist Devices