Assessment of the local hot core temperature during normal operation in a pebble-bed type very high temperature reactor has been carried out by using the computational fluid dynamic (CFD) method for which the boundary conditions were obtained from the results of a macroscopic analysis of the core using a system thermal analysis code, GAMMA. Three pebble arrangements are selected, which are simple cubic (SC), body-centered cubic, and face-centered cubic. The results showed that the SC arrangement having the lowest porosity gives the highest fuel temperature of but still below the normal operational fuel limit of . Comparison of the CFD results with an empirical correlation was made for the pressure drop and Nusselt number. Both results showed a similar tendency that the pressure drop and the Nusselt number increases as the porosity decreases but there were large differences in their absolute values. The benchmark calculation for the pressure drop of the packed particles in a square channel indicated that the correlation for the full core used in the system code is not appropriate for the prediction of a local thermal-fluid behavior in an ordered pebble arrangement.
Skip Nav Destination
e-mail: mhkim@kaeri.re.kr
Article navigation
January 2009
Research Papers
Computational Fluid Dynamics Assessment of the Local Hot Core Temperature in a Pebble-Bed Type Very High Temperature Reactor
Min-Hwan Kim,
e-mail: mhkim@kaeri.re.kr
Min-Hwan Kim
Korea Atomic Energy Research Institute
, 1045 Daedeokdaero, Yoseong, Daejeon, 304-353, Republic of Korea
Search for other works by this author on:
Hong-Sik Lim,
Hong-Sik Lim
Korea Atomic Energy Research Institute
, 1045 Daedeokdaero, Yoseong, Daejeon, 304-353, Republic of Korea
Search for other works by this author on:
Won Jae Lee
Won Jae Lee
Korea Atomic Energy Research Institute
, 1045 Daedeokdaero, Yoseong, Daejeon, 304-353, Republic of Korea
Search for other works by this author on:
Min-Hwan Kim
Korea Atomic Energy Research Institute
, 1045 Daedeokdaero, Yoseong, Daejeon, 304-353, Republic of Koreae-mail: mhkim@kaeri.re.kr
Hong-Sik Lim
Korea Atomic Energy Research Institute
, 1045 Daedeokdaero, Yoseong, Daejeon, 304-353, Republic of Korea
Won Jae Lee
Korea Atomic Energy Research Institute
, 1045 Daedeokdaero, Yoseong, Daejeon, 304-353, Republic of KoreaJ. Eng. Gas Turbines Power. Jan 2009, 131(1): 012905 (6 pages)
Published Online: October 2, 2008
Article history
Received:
July 21, 2008
Revised:
July 28, 2008
Published:
October 2, 2008
Citation
Kim, M., Lim, H., and Lee, W. J. (October 2, 2008). "Computational Fluid Dynamics Assessment of the Local Hot Core Temperature in a Pebble-Bed Type Very High Temperature Reactor." ASME. J. Eng. Gas Turbines Power. January 2009; 131(1): 012905. https://doi.org/10.1115/1.2983136
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Development of Local Heat Transfer Models for Safety Assessment of High Temperature Gas-Cooled Reactor Cores—Part I: Pebble Bed Reactors
J. Eng. Gas Turbines Power (January,2010)
Investigation of the Pressure Drop Across Packed Beds of Spherical Beads: Comparison of Empirical Models With Pore-Level Computational Fluid Dynamics Simulations
J. Fluids Eng (July,2019)
Pressure Drop Predictions in Microfibrous Materials Using Computational Fluid Dynamics
J. Fluids Eng (July,2008)
Implementation of a Pressure Drop Model for the CFD Simulation of Clogged Containment Sump Strainers
J. Eng. Gas Turbines Power (August,2010)
Related Proceedings Papers
Related Chapters
Completing the Picture
Air Engines: The History, Science, and Reality of the Perfect Engine
Summary
Heat Transfer & Hydraulic Resistance at Supercritical Pressures in Power Engineering Applications
New Generation Reactors
Energy and Power Generation Handbook: Established and Emerging Technologies