... to the theoretical model, and measurement accuracy. 01 05 2011 10 10 2011 20 12 2011 20 12 2011 boundary layer turbulence flow simulation heat exchangers laminar flow laminar to turbulent transitions microchannel flow Navier-Stokes equations pipe flow micro-channels laminar...

... that for the transitionally rough regime considered in the present study, roughness effects are significant but mostly confined to the inner region of the wall jet. 01 11 2010 28 09 2011 11 11 2011 11 11 2011 boundary layer turbulence flow visualisation jets surface roughness velocity...

... boundary layer turbulence computational fluid dynamics external flows flow simulation nonequilibrium flow viscosity Turbulent shear layers represented by boundary layers, mixing layers, jets etc., are frequently encountered in different industrial and natural flows. Equilibrium boundary layers...

..., and flow compressibility on the onset of stall. This approach also presents an analysis method that can be used to predict the stall of airfoils with alternative nose geometry. 16 01 2011 09 09 2011 09 09 2011 08 11 2011 08 11 2011 aerodynamics boundary layer turbulence...

... found that the flow, including its Strouhal numbers and radial distributions of the mean and fluctuating velocities, depends considerably on the swirl number. 17 12 2010 23 08 2011 27 10 2011 27 10 2011 boundary layer turbulence cyclone separators flow visualisation pipe...

... . 754 and 1 . 724 are replaced by 0 . 88 and 2 . 02 , respectively. The corrected Table 1 is given below. boundary layer turbulence friction pipe flow 08 08 2011 30 08 2011 05 10 2011 05 10 2011 2011 American Society...

... 01 01 2011 14 08 2011 15 09 2011 15 09 2011 boundary layer turbulence external flows flow separation flow visualisation jets pipe flow The jet was produced using a submerged vertical precision type 304 stainless steel tube placed on the cylinder centerline...

... simplified numerical simulation. boundary layer turbulence computational fluid dynamics convergence of numerical methods drops flow simulation grid computing mesh generation numerical analysis particle flows turbulence CFD numerical uncertainty Cooling towers are equipment...

... in the wall heat and mass transfer rate. turbulent wall jet over rough surface power law versus log law scaling erosion by turbulent wall jets similarity analysis over rough surface Izakson-Millikan log law and power law overlap regions wall bounded turbulent flows boundary layer turbulence...

... in crossflow over microscale pin fins under various hydrodynamic conditions. boundary layer turbulence drag external flows flow measurement microfluidics 23 01 2010 11 05 2011 16 08 2011 16 08 2011 References 1 Peles , Y. , Kuo , C. J. , Koşar...

... 08 06 2011 16 08 2011 16 08 2011 boundary layer turbulence bubbles cavitation external flows flow simulation hydrodynamics numerical analysis two-phase flow viscosity vortices Cavitation on the surfaces of hydraulic machinery usually causes vibration and noise...

... at the rod wall in the gap position. 28 06 2009 10 06 2011 19 07 2011 19 07 2011 boundary layer turbulence external flows flow measurement laminar flow pipe flow rods (structures) gas flow yawed cylinders row of cylinders wall pressure boundary layer...

... for the broad appeal of this quite fundamental problem is that the configuration appears in various forms in a wide range of applications that arise in diverse engineering systems. computational fluid dynamics transient flow unsteady mixing chamber boundary layer turbulence channel flow flow...

... 28 06 2011 28 06 2011 boundary layer turbulence vortices 2011 American Society of Mechanical Engineers ...

... , O. , 2008 , “ On the Spatial Resolution of Velocity and Velocity Gradient-based Turbulence Statistics Measured with Multi-Sensor Hot-Wire Probes ,” Exp. Fluids , 46 , pp. 109 – 119 . 10.1007/s00348-008-0544-y boundary layer turbulence convection entropy flow simulation laminar...

... 06 2011 15 06 2011 boundary layer turbulence confined flow cooling jets laminar flow microfluidics nozzles orifices (mechanical) Microscale liquid jet impingement cooling has received a lot of research attention lately for its application in high heat flux electronics...

...Ting Chen; S. C. Li A new type of cavitation triggered by boundary-layer turbulence-production has been identified from the turbines of the Three Gorges Power Station. Our previous studies point out that the addition of the ‘guide-plate’ is responsible for the increase of the turbulence level...

... [( 2 )]). The knowledge of their dissipative behavior and, consequently, of the conditions under which the system is subjected to cavitation is of great importance in obtaining accurate information. cavitation computational fluid dynamics pipe flow pressure drop boundary layer...

... 07 06 2011 07 06 2011 boundary layer turbulence flow separation flow visualisation fractals jets shear turbulence wetting An offset jet is formed when a jet discharges into a medium above a wall parallel to the axis of the jet exit but offset by a certain height...

... a rapid rise at relatively small incidence angles [ 14 ]. anemometry boundary layer turbulence drag reduction external flows flow control flow instability flow separation flow visualisation pressure measurement rods (structures) vibrations vortices wakes 29 10 2010 21 04...