Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Issues

Volume 80, Issue 5
July 1958
This article was originally published in
Transactions of the American Society of Mechanical Engineers
Issue Cover
ISSN 0097-6822
In this Issue

Research Papers

Problems in Measuring Steam Flow at 1250 Psia and 950 F With Nozzles and Orifices
J. W. Murdock, J. Goldsbury
Trans. ASME. July 1958, 80(5): 975–983. doi: https://doi.org/10.1115/1.4012577
View articletitled, Problems in Measuring Steam Flow at 1250 Psia and 950 F With Nozzles and Orifices
Open the PDF for in another window
Topics: Flow (Dynamics) , Nozzles , Orifices , Steam , Calibration , Turbines , Plates (structures) , Design , Discharge coefficient , Flanges
The Dependence of Thermal Stresses in Cylindrical Reactor Fuel Elements Upon the Method of Cooling
K. R. Merckx
Trans. ASME. July 1958, 80(5): 985–990. doi: https://doi.org/10.1115/1.4012580
View articletitled, The Dependence of Thermal Stresses in Cylindrical Reactor Fuel Elements Upon the Method of Cooling
Open the PDF for in another window
Topics: Cooling , Nuclear fuels , Thermal stresses , Fuels , Stress , Temperature , Uranium
Vibration of Rods Induced by Water in Parallel Flow
D. Burgreen, J. J. Byrnes, D. M. Benforado
Trans. ASME. July 1958, 80(5): 991–1001. doi: https://doi.org/10.1115/1.4012582
View articletitled, Vibration of Rods Induced by Water in Parallel Flow
Open the PDF for in another window
Topics: Flow (Dynamics) , Rods , Vibration , Water , Aluminum , Brass (Metal) , Cycles , Fuel rods , Nuclear reactors , Temperature
Apparatus for the Experimental Study of the Thermodynamic Properties of Water
H. H. Reamer, G. N. Richter, W. M. DeWitt, B. H. Sage
Trans. ASME. July 1958, 80(5): 1004–1008. doi: https://doi.org/10.1115/1.4012586
View articletitled, Apparatus for the Experimental Study of the Thermodynamic Properties of Water
Open the PDF for in another window
Topics: Water , Joules , Temperature , Enthalpy , Fluids , Pressure , Steam , Weight (Mass)
An Instrument for the Measurement of the Viscosity of Steam and Compressed Water
J. Kestin, J. R. Moszynski
Trans. ASME. July 1958, 80(5): 1009–1014. doi: https://doi.org/10.1115/1.4012587
View articletitled, An Instrument for the Measurement of the Viscosity of Steam and Compressed Water
Open the PDF for in another window
Topics: Instrumentation , Steam , Viscosity , Water , Oscillations
Economic Choice of Generator Unit Size
L. K. Kirchmayer, A. G. Mellor
Trans. ASME. July 1958, 80(5): 1015–1023. doi: https://doi.org/10.1115/1.4012588
View articletitled, Economic Choice of Generator Unit Size
Open the PDF for in another window
Topics: Economics , Generators , Integrated systems , Mathematics , Probability
Ideal Performance of Valved-Combustors and Applicability to Several Engine Types
Arthur W. Goldstein, J. F. Klapproth, Melvin J. Hartmann
Trans. ASME. July 1958, 80(5): 1027–1035. doi: https://doi.org/10.1115/1.4012593
View articletitled, Ideal Performance of Valved-Combustors and Applicability to Several Engine Types
Open the PDF for in another window
Topics: Combustion chambers , Engines , Flow (Dynamics) , Pressure , Ramjets , Turbines , Turbojets
Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion
F. G. Fisher, R. K. Allen, G. W. Luvisi
Trans. ASME. July 1958, 80(5): 1037–1049. doi: https://doi.org/10.1115/1.4012596
View articletitled, Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion
Open the PDF for in another window
Topics: Adhesion , Rails , Wheels , Locomotives , Economics , Sands
A Method for Studying the Behavior of Cutting Fluids in Wear of Tool Materials
L. V. Colwell
Trans. ASME. July 1958, 80(5): 1054–1058. doi: https://doi.org/10.1115/1.4012601
View articletitled, A Method for Studying the Behavior of Cutting Fluids in Wear of Tool Materials
Open the PDF for in another window
Topics: Cutting , Fluids , Wear , Friction , Stress , Oscillations , Compressive stress , Cutting tools , Design , Finishes
The Spiral Point Drill—A New Concept in Drill Point Geometry
Hans Ernst, W. A. Haggerty
Trans. ASME. July 1958, 80(5): 1059–1070. doi: https://doi.org/10.1115/1.4012602
View articletitled, The Spiral Point Drill—A New Concept in Drill Point Geometry
Open the PDF for in another window
Topics: Drills (Tools) , Geometry , Shapes , Cutting , Chisels , Drilling , Manufacturing , Sheet metal , Aircraft , Economics
Behavior of Cutting Fluids in Reaming Steels
L. V. Colwell, Henrik Branders
Trans. ASME. July 1958, 80(5): 1073–1077. doi: https://doi.org/10.1115/1.4012605
View articletitled, Behavior of Cutting Fluids in Reaming Steels
Open the PDF for in another window
Topics: Cutting , Fluids , Lubricants , Steel , Surface roughness , Torque
The Chatter of Lathe Tools Under Orthogonal Cutting Conditions
S. A. Tobias, W. Fishwick
Trans. ASME. July 1958, 80(5): 1079–1087. doi: https://doi.org/10.1115/1.4012609
View articletitled, The Chatter of Lathe Tools Under Orthogonal Cutting Conditions
Open the PDF for in another window
Topics: Chatter , Cutting , Stability , Shapes
The Effect of Tool-Chip Contact Area in Metal Machining
H. Takeyama, E. Usui
Trans. ASME. July 1958, 80(5): 1089–1093. doi: https://doi.org/10.1115/1.4012614
View articletitled, The Effect of Tool-Chip Contact Area in Metal Machining
Open the PDF for in another window
Topics: Machining , Metals , Machinability , Stress
The Pressure-Viscosity Effect: Background
H. A. Hartung
Trans. ASME. July 1958, 80(5): 1097–1098. doi: https://doi.org/10.1115/1.4012617
View articletitled, The Pressure-Viscosity Effect: Background
Open the PDF for in another window
Topics: Pressure , Viscosity , Lubrication , Design , Machine components
Viscosity-Pressure Effect on Friction and Temperature in a Journal Bearing
S. J. Needs
Trans. ASME. July 1958, 80(5): 1099–1102. doi: https://doi.org/10.1115/1.4012618
View articletitled, Viscosity-Pressure Effect on Friction and Temperature in a Journal Bearing
Open the PDF for in another window
Topics: Friction , Journal bearings , Pressure , Temperature , Viscosity , Machine components , Lubricants , Lubrication , Oils , Operating temperature
Experiments on Imperfect Lubrication
M. D. Hersey, C. W. Staples
Trans. ASME. July 1958, 80(5): 1104–1107. doi: https://doi.org/10.1115/1.4012621
View articletitled, Experiments on Imperfect Lubrication
Open the PDF for in another window
Topics: Lubrication , Viscosity , Friction , Stress , Pressure , Wear , Atmospheric pressure , Bearings , Boundary lubrication , Brass (Metal)
Influence of Pressure and Temperature on Oil Viscosity in Thrust Bearings
B. Sternlicht
Trans. ASME. July 1958, 80(5): 1108–1112. doi: https://doi.org/10.1115/1.4012622
View articletitled, Influence of Pressure and Temperature on Oil Viscosity in Thrust Bearings
Open the PDF for in another window
Topics: Pressure , Temperature , Thrust bearings , Viscosity , Bearings
Some Factors Influencing the Area-Load Characteristics for Semismooth Contiguous Surfaces Under “Static” Loading
F. F. Ling
Trans. ASME. July 1958, 80(5): 1113–1120. doi: https://doi.org/10.1115/1.4012623
View articletitled, Some Factors Influencing the Area-Load Characteristics for Semismooth Contiguous Surfaces Under “Static” Loading
Open the PDF for in another window
Topics: Stress , Friction , Wedges , Cutting , Deformation , Shapes , Work hardening
Transition from Laminar to Turbulent Shear Flow—A Review of Some Recent Advances in Its Understanding
M. V. Morkovin
Trans. ASME. July 1958, 80(5): 1121–1128. doi: https://doi.org/10.1115/1.4012624
View articletitled, Transition from Laminar to Turbulent Shear Flow—A Review of Some Recent Advances in Its Understanding
Open the PDF for in another window
Topics: Shear turbulence , Shear (Mechanics) , Stability
Flow Characteristics of a Multiple-Cell Pump Basin
W. L. Dornaus
Trans. ASME. July 1958, 80(5): 1129–1136. doi: https://doi.org/10.1115/1.4012625
View articletitled, Flow Characteristics of a Multiple-Cell Pump Basin
Open the PDF for in another window
Topics: Flow (Dynamics) , Pumps , Suction
Prediction of Flashing Water Flow Through Fine Annular Clearances
A. Agostinelli, V. Salemann
Trans. ASME. July 1958, 80(5): 1138–1142. doi: https://doi.org/10.1115/1.4012629
View articletitled, Prediction of Flashing Water Flow Through Fine Annular Clearances
Open the PDF for in another window
Topics: Flashing , Flow (Dynamics) , Water , Annulus , Clearances (Engineering) , Pressure drop , Steam , Temperature
Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint: Hydraulic and Weight Features of Welded Spiral Cases
R. A. Sutherland
Trans. ASME. July 1958, 80(5): 1143–1145. doi: https://doi.org/10.1115/1.4012630
View articletitled, Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint: Hydraulic and Weight Features of Welded Spiral Cases
Open the PDF for in another window
Topics: Consulting engineers , Weight (Mass) , Design , Steel
Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint: Welded Spiral Case Construction Procedures
G. R. Latham
Trans. ASME. July 1958, 80(5): 1145–1147. doi: https://doi.org/10.1115/1.4012631
View articletitled, Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint: Welded Spiral Case Construction Procedures
Open the PDF for in another window
Topics: Construction , Consulting engineers , Welding
Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint: TVA Experiences, Welded Versus Riveted Spiral Cases
R. M. Gardner
Trans. ASME. July 1958, 80(5): 1147–1153. doi: https://doi.org/10.1115/1.4012632
View articletitled, Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint: TVA Experiences, Welded Versus Riveted Spiral Cases
Open the PDF for in another window
Topics: Consulting engineers , Welding
Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint: Pressure-Embedment of Spiral Cases
Bradley G. Seitz
Trans. ASME. July 1958, 80(5): 1153–1156. doi: https://doi.org/10.1115/1.4012633
View articletitled, Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint: Pressure-Embedment of Spiral Cases
Open the PDF for in another window
Topics: Consulting engineers , Pressure , Design , Hydraulic turbines
Blowdown and Charging Processes in a Single Gas Receiver With Heat Transfer
W. C. Reynolds, W. M. Kays
Trans. ASME. July 1958, 80(5): 1160–1168. doi: https://doi.org/10.1115/1.4012638
View articletitled, Blowdown and Charging Processes in a Single Gas Receiver With Heat Transfer
Open the PDF for in another window
Topics: Heat transfer , Containers , Capacitors , Heat , Temperature , Thermal energy , Thermodynamic processes
The Transient Response of a Two-Fluid Counterflow Heat Exchanger—The Gas-Turbine Regenerator
R. M. Cima, A. L. London
Trans. ASME. July 1958, 80(5): 1169–1175. doi: https://doi.org/10.1115/1.4012639
View articletitled, The Transient Response of a Two-Fluid Counterflow Heat Exchanger—The Gas-Turbine Regenerator
Open the PDF for in another window
Topics: Fluids , Gas turbines , Heat exchangers , Transients (Dynamics) , Steady state , Turbines , Uncertainty

Discussions and Closures

Discussion: “Problems in Measuring Steam Flow at 1250 Psia and 950 F With Nozzles and Orifices” (Murdock, J. W., and Goldsbury, J., 1958, Trans. ASME, 80, pp. 975–983)
K. C. Cotton
Trans. ASME. July 1958, 80(5): 983. doi: https://doi.org/10.1115/1.4012578
View articletitled, Discussion: “Problems in Measuring Steam Flow at 1250 Psia and 950 F With Nozzles and Orifices” (Murdock, J. W., and Goldsbury, J., 1958, Trans. ASME, 80, pp. 975–983)
Open the PDF for in another window
Topics: Flow (Dynamics) , Nozzles , Orifices , Steam
Closure to “Discussion of ‘Problems in Measuring Steam Flow at 1250 Psia and 950 F With Nozzles and Orifices’” (1958, Trans. ASME, 80, p. 983)
J. W. Murdock, J. Goldsbury
Trans. ASME. July 1958, 80(5): 983–984. doi: https://doi.org/10.1115/1.4012579
View articletitled, Closure to “Discussion of ‘Problems in Measuring Steam Flow at 1250 Psia and 950 F With Nozzles and Orifices’” (1958, Trans. ASME, 80, p. 983)
Open the PDF for in another window
Topics: Flow (Dynamics) , Nozzles , Steam
Discussion: “The Dependence of Thermal Stresses in Cylindrical Reactor Fuel Elements Upon the Method of Cooling” (Merckx, K. R., 1958, Trans. ASME, 80, pp. 985–990)
H. Poritsky
Trans. ASME. July 1958, 80(5): 990. doi: https://doi.org/10.1115/1.4012581
View articletitled, Discussion: “The Dependence of Thermal Stresses in Cylindrical Reactor Fuel Elements Upon the Method of Cooling” (Merckx, K. R., 1958, Trans. ASME, 80, pp. 985–990)
Open the PDF for in another window
Topics: Cooling , Nuclear fuels , Thermal stresses
Discussion: “Vibration of Rods Induced by Water in Parallel Flow” (Burgreen, D., Byrnes, J. J., and Benforado, D. M., 1958, Trans. ASME, 80, pp. 991–1001)
D. R. Miller
Trans. ASME. July 1958, 80(5): 1001–1002. doi: https://doi.org/10.1115/1.4012583
View articletitled, Discussion: “Vibration of Rods Induced by Water in Parallel Flow” (Burgreen, D., Byrnes, J. J., and Benforado, D. M., 1958, Trans. ASME, 80, pp. 991–1001)
Open the PDF for in another window
Topics: Flow (Dynamics) , Rods , Vibration , Water
Discussion: “Vibration of Rods Induced by Water in Parallel Flow” (Burgreen, D., Byrnes, J. J., and Benforado, D. M., 1958, Trans. ASME, 80, pp. 991–1001)
G. Sonnemann
Trans. ASME. July 1958, 80(5): 1002. doi: https://doi.org/10.1115/1.4012584
View articletitled, Discussion: “Vibration of Rods Induced by Water in Parallel Flow” (Burgreen, D., Byrnes, J. J., and Benforado, D. M., 1958, Trans. ASME, 80, pp. 991–1001)
Open the PDF for in another window
Topics: Flow (Dynamics) , Rods , Vibration , Water
Closure to “Discussions of ‘Vibration of Rods Induced by Water in Parallel Flow’” (1958, Trans. ASME, 80, pp. 1001–1002)
D. Burgreen, J. J. Byrnes, D. M. Benforado
Trans. ASME. July 1958, 80(5): 1002–1003. doi: https://doi.org/10.1115/1.4012585
View articletitled, Closure to “Discussions of ‘Vibration of Rods Induced by Water in Parallel Flow’” (1958, Trans. ASME, 80, pp. 1001–1002)
Open the PDF for in another window
Topics: Rods , Vibration , Water
Discussion: “Economic Choice of Generator Unit Size” (Kirchmayer, L. K., and Mellor, A. G., 1958, Trans. ASME, 80, pp. 1015–1023)
H. Halperin
Trans. ASME. July 1958, 80(5): 1023–1024. doi: https://doi.org/10.1115/1.4012589
View articletitled, Discussion: “Economic Choice of Generator Unit Size” (Kirchmayer, L. K., and Mellor, A. G., 1958, Trans. ASME, 80, pp. 1015–1023)
Open the PDF for in another window
Topics: Economics , Generators
Discussion: “Economic Choice of Generator Unit Size” (Kirchmayer, L. K., and Mellor, A. G., 1958, Trans. ASME, 80, pp. 1015–1023)
W. E. Hopkins, T. J. Whelan
Trans. ASME. July 1958, 80(5): 1024. doi: https://doi.org/10.1115/1.4012590
View articletitled, Discussion: “Economic Choice of Generator Unit Size” (Kirchmayer, L. K., and Mellor, A. G., 1958, Trans. ASME, 80, pp. 1015–1023)
Open the PDF for in another window
Topics: Economics , Generators
Discussion: “Economic Choice of Generator Unit Size” (Kirchmayer, L. K., and Mellor, A. G., 1958, Trans. ASME, 80, pp. 1015–1023)
M. J. Steinberg
Trans. ASME. July 1958, 80(5): 1024–1026. doi: https://doi.org/10.1115/1.4012591
View articletitled, Discussion: “Economic Choice of Generator Unit Size” (Kirchmayer, L. K., and Mellor, A. G., 1958, Trans. ASME, 80, pp. 1015–1023)
Open the PDF for in another window
Topics: Economics , Generators
Closure to “Discussions of ‘Economic Choice of Generator Unit Size’” (1958, Trans. ASME, 80, pp. 1023–1026)
L. K. Kirchmayer, A. G. Mellor
Trans. ASME. July 1958, 80(5): 1026. doi: https://doi.org/10.1115/1.4012592
View articletitled, Closure to “Discussions of ‘Economic Choice of Generator Unit Size’” (1958, Trans. ASME, 80, pp. 1023–1026)
Open the PDF for in another window
Topics: Economics , Generators
Discussion: “Ideal Performance of Valved-Combustors and Applicability to Several Engine Types” (Goldstein, Arthur W., Klapproth, J. F., and Hartmann, Melvin J., 1958, Trans. ASME, 80, pp. 1027–1035)
Joseph V. Foa
Trans. ASME. July 1958, 80(5): 1035–1036. doi: https://doi.org/10.1115/1.4012594
View articletitled, Discussion: “Ideal Performance of Valved-Combustors and Applicability to Several Engine Types” (Goldstein, Arthur W., Klapproth, J. F., and Hartmann, Melvin J., 1958, Trans. ASME, 80, pp. 1027–1035)
Open the PDF for in another window
Topics: Combustion chambers , Engines
Closure to “Discussion of ‘Ideal Performance of Valved-Combustors and Applicability to Several Engine Types’” (1958, Trans. ASME, 80, pp. 1035–1036)
Arthur W. Goldstein, J. F. Klapproth, Melvin J. Hartmann
Trans. ASME. July 1958, 80(5): 1036. doi: https://doi.org/10.1115/1.4012595
View articletitled, Closure to “Discussion of ‘Ideal Performance of Valved-Combustors and Applicability to Several Engine Types’” (1958, Trans. ASME, 80, pp. 1035–1036)
Open the PDF for in another window
Topics: Combustion chambers , Engines
Discussion: “Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion” (Fisher, F. G., Allen, R. K., and Luvisi, G. W., 1958, Trans. ASME, 80, pp. 1037–1049)
F. T. Barwell
Trans. ASME. July 1958, 80(5): 1049–1050. doi: https://doi.org/10.1115/1.4012597
View articletitled, Discussion: “Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion” (Fisher, F. G., Allen, R. K., and Luvisi, G. W., 1958, Trans. ASME, 80, pp. 1037–1049)
Open the PDF for in another window
Topics: Adhesion , Rails , Wheels
Discussion: “Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion” (Fisher, F. G., Allen, R. K., and Luvisi, G. W., 1958, Trans. ASME, 80, pp. 1037–1049)
R. L. Chapman
Trans. ASME. July 1958, 80(5): 1050–1051. doi: https://doi.org/10.1115/1.4012598
View articletitled, Discussion: “Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion” (Fisher, F. G., Allen, R. K., and Luvisi, G. W., 1958, Trans. ASME, 80, pp. 1037–1049)
Open the PDF for in another window
Topics: Adhesion , Rails , Wheels
Discussion: “Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion” (Fisher, F. G., Allen, R. K., and Luvisi, G. W., 1958, Trans. ASME, 80, pp. 1037–1049)
I. N. Moseley
Trans. ASME. July 1958, 80(5): 1051–1052. doi: https://doi.org/10.1115/1.4012599
View articletitled, Discussion: “Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion” (Fisher, F. G., Allen, R. K., and Luvisi, G. W., 1958, Trans. ASME, 80, pp. 1037–1049)
Open the PDF for in another window
Topics: Adhesion , Rails , Wheels
Closure to “Discussions of ‘Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion’” (1958, Trans. ASME, 80, pp. 1049–1052)
F. G. Fisher, R. K. Allen, G. W. Luvisi
Trans. ASME. July 1958, 80(5): 1052–1053. doi: https://doi.org/10.1115/1.4012600
View articletitled, Closure to “Discussions of ‘Advancing Adhesion—Development and Test of a Chemical Formulation to Condition the Running Surface of Rail for Improved Wheel-to-Rail Adhesion’” (1958, Trans. ASME, 80, pp. 1049–1052)
Open the PDF for in another window
Topics: Adhesion , Rails , Wheels
Discussion: “The Spiral Point Drill—A New Concept in Drill Point Geometry” (Ernst, Hans, and Haggerty, W. A., 1958, Trans. ASME, 80, pp. 1059–1070)
C. J. Oxford, Jr.
Trans. ASME. July 1958, 80(5): 1070–1071. doi: https://doi.org/10.1115/1.4012603
View articletitled, Discussion: “The Spiral Point Drill—A New Concept in Drill Point Geometry” (Ernst, Hans, and Haggerty, W. A., 1958, Trans. ASME, 80, pp. 1059–1070)
Open the PDF for in another window
Topics: Drills (Tools) , Geometry
Closure to “Discussion of ‘The Spiral Point Drill—A New Concept in Drill Point Geometry’” (1958, Trans. ASME, 80, pp. 1070–1071)
Hans Ernst, W. A. Haggerty
Trans. ASME. July 1958, 80(5): 1072. doi: https://doi.org/10.1115/1.4012604
View articletitled, Closure to “Discussion of ‘The Spiral Point Drill—A New Concept in Drill Point Geometry’” (1958, Trans. ASME, 80, pp. 1070–1071)
Open the PDF for in another window
Topics: Drills (Tools)
Discussion: “Behavior of Cutting Fluids in Reaming Steels” (Colwell, L. V., and Branders, Henrik, 1958, Trans. ASME, 80, pp. 1073–1077)
Carl J. Oxford, Jr.
Trans. ASME. July 1958, 80(5): 1077. doi: https://doi.org/10.1115/1.4012606
View articletitled, Discussion: “Behavior of Cutting Fluids in Reaming Steels” (Colwell, L. V., and Branders, Henrik, 1958, Trans. ASME, 80, pp. 1073–1077)
Open the PDF for in another window
Topics: Cutting , Fluids , Steel
Discussion: “Behavior of Cutting Fluids in Reaming Steels” (Colwell, L. V., and Branders, Henrik, 1958, Trans. ASME, 80, pp. 1073–1077)
K. J. Trigger, B. T. Chao
Trans. ASME. July 1958, 80(5): 1077–1078. doi: https://doi.org/10.1115/1.4012607
View articletitled, Discussion: “Behavior of Cutting Fluids in Reaming Steels” (Colwell, L. V., and Branders, Henrik, 1958, Trans. ASME, 80, pp. 1073–1077)
Open the PDF for in another window
Topics: Cutting , Fluids , Steel
Closure to “Discussions of ‘Behavior of Cutting Fluids in Reaming Steels’” (1958, Trans. ASME, 80, pp. 1077–1078)
L. V. Colwell, Henrik Branders
Trans. ASME. July 1958, 80(5): 1078. doi: https://doi.org/10.1115/1.4012608
View articletitled, Closure to “Discussions of ‘Behavior of Cutting Fluids in Reaming Steels’” (1958, Trans. ASME, 80, pp. 1077–1078)
Open the PDF for in another window
Topics: Cutting , Fluids
Discussion: “The Chatter of Lathe Tools Under Orthogonal Cutting Conditions” (Tobias, S. A., and Fishwick, W., 1958, Trans. ASME, 80, pp. 1079–1087)
S. Doi
Trans. ASME. July 1958, 80(5): 1087. doi: https://doi.org/10.1115/1.4012610
View articletitled, Discussion: “The Chatter of Lathe Tools Under Orthogonal Cutting Conditions” (Tobias, S. A., and Fishwick, W., 1958, Trans. ASME, 80, pp. 1079–1087)
Open the PDF for in another window
Topics: Chatter , Cutting
Discussion: “The Chatter of Lathe Tools Under Orthogonal Cutting Conditions” (Tobias, S. A., and Fishwick, W., 1958, Trans. ASME, 80, pp. 1079–1087)
R. S. Hahn
Trans. ASME. July 1958, 80(5): 1087. doi: https://doi.org/10.1115/1.4012611
View articletitled, Discussion: “The Chatter of Lathe Tools Under Orthogonal Cutting Conditions” (Tobias, S. A., and Fishwick, W., 1958, Trans. ASME, 80, pp. 1079–1087)
Open the PDF for in another window
Topics: Chatter , Cutting
Discussion: “The Chatter of Lathe Tools Under Orthogonal Cutting Conditions” (Tobias, S. A., and Fishwick, W., 1958, Trans. ASME, 80, pp. 1079–1087)
A. O. Schmidt, B. F. von Turkovich
Trans. ASME. July 1958, 80(5): 1087–1088. doi: https://doi.org/10.1115/1.4012612
View articletitled, Discussion: “The Chatter of Lathe Tools Under Orthogonal Cutting Conditions” (Tobias, S. A., and Fishwick, W., 1958, Trans. ASME, 80, pp. 1079–1087)
Open the PDF for in another window
Topics: Chatter , Cutting
Closure to “Discussions of ‘The Chatter of Lathe Tools Under Orthogonal Cutting Conditions’” (1958, Trans. ASME, 80, pp. 1087–1088)
S. A. Tobias, W. Fishwick
Trans. ASME. July 1958, 80(5): 1088. doi: https://doi.org/10.1115/1.4012613
View articletitled, Closure to “Discussions of ‘The Chatter of Lathe Tools Under Orthogonal Cutting Conditions’” (1958, Trans. ASME, 80, pp. 1087–1088)
Open the PDF for in another window
Topics: Chatter , Cutting
Discussion: “The Effect of Tool-Chip Contact Area in Metal Machining” (Takeyama, H., and Usui, E., 1958, Trans. ASME, 80, pp. 1089–1093)
Bertil N. Colding
Trans. ASME. July 1958, 80(5): 1093–1095. doi: https://doi.org/10.1115/1.4012615
View articletitled, Discussion: “The Effect of Tool-Chip Contact Area in Metal Machining” (Takeyama, H., and Usui, E., 1958, Trans. ASME, 80, pp. 1089–1093)
Open the PDF for in another window
Topics: Machining , Metals
Closure to “Discussion of ‘The Effect of Tool-Chip Contact Area in Metal Machining’” (1958, Trans. ASME, 80, pp. 1093–1095)
H. Takeyama, E. Usui
Trans. ASME. July 1958, 80(5): 1095–1096. doi: https://doi.org/10.1115/1.4012616
View articletitled, Closure to “Discussion of ‘The Effect of Tool-Chip Contact Area in Metal Machining’” (1958, Trans. ASME, 80, pp. 1093–1095)
Open the PDF for in another window
Topics: Metals
Discussion: “Viscosity-Pressure Effect on Friction and Temperature in a Journal Bearing” (Needs, S. J., 1958, Trans. ASME, 80, pp. 1099–1102)
H. A. Hartung
Trans. ASME. July 1958, 80(5): 1102–1103. doi: https://doi.org/10.1115/1.4012619
View articletitled, Discussion: “Viscosity-Pressure Effect on Friction and Temperature in a Journal Bearing” (Needs, S. J., 1958, Trans. ASME, 80, pp. 1099–1102)
Open the PDF for in another window
Topics: Friction , Journal bearings , Pressure , Temperature , Viscosity
Closure to “Discussion of ‘Viscosity-Pressure Effect on Friction and Temperature in a Journal Bearing’” (1958, Trans. ASME, 80, pp. 1102–1103)
S. J. Needs
Trans. ASME. July 1958, 80(5): 1103. doi: https://doi.org/10.1115/1.4012620
View articletitled, Closure to “Discussion of ‘Viscosity-Pressure Effect on Friction and Temperature in a Journal Bearing’” (1958, Trans. ASME, 80, pp. 1102–1103)
Open the PDF for in another window
Topics: Friction , Pressure , Temperature , Viscosity
Discussion: “Flow Characteristics of a Multiple-Cell Pump Basin” (Dornaus, W. L., 1958, Trans. ASME, 80, pp. 1129–1136)
D. F. Denny
Trans. ASME. July 1958, 80(5): 1136–1137. doi: https://doi.org/10.1115/1.4012626
View articletitled, Discussion: “Flow Characteristics of a Multiple-Cell Pump Basin” (Dornaus, W. L., 1958, Trans. ASME, 80, pp. 1129–1136)
Open the PDF for in another window
Topics: Flow (Dynamics) , Pumps
Discussion: “Flow Characteristics of a Multiple-Cell Pump Basin” (Dornaus, W. L., 1958, Trans. ASME, 80, pp. 1129–1136)
R. J. MacMeekin
Trans. ASME. July 1958, 80(5): 1137. doi: https://doi.org/10.1115/1.4012627
View articletitled, Discussion: “Flow Characteristics of a Multiple-Cell Pump Basin” (Dornaus, W. L., 1958, Trans. ASME, 80, pp. 1129–1136)
Open the PDF for in another window
Topics: Flow (Dynamics) , Pumps
Closure to “Discussions of ‘Flow Characteristics of a Multiple-Cell Pump Basin’” (1958, Trans. ASME, 80, pp. 1136–1137)
W. L. Dornaus
Trans. ASME. July 1958, 80(5): 1137. doi: https://doi.org/10.1115/1.4012628
View articletitled, Closure to “Discussions of ‘Flow Characteristics of a Multiple-Cell Pump Basin’” (1958, Trans. ASME, 80, pp. 1136–1137)
Open the PDF for in another window
Topics: Flow (Dynamics) , Pumps
Discussion: “Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint” (Sutherland, R. A., Latham, G. R., Gardner, R. M., and Seitz, Bradley G., 1958, Trans. ASME, 80, pp. 1143–1156)
Olav Lavik
Trans. ASME. July 1958, 80(5): 1156. doi: https://doi.org/10.1115/1.4012634
View articletitled, Discussion: “Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint” (Sutherland, R. A., Latham, G. R., Gardner, R. M., and Seitz, Bradley G., 1958, Trans. ASME, 80, pp. 1143–1156)
Open the PDF for in another window
Topics: Consulting engineers
Discussion: “Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint” (Sutherland, R. A., Latham, G. R., Gardner, R. M., and Seitz, Bradley G., 1958, Trans. ASME, 80, pp. 1143–1156)
Harold B. Nunnelee
Trans. ASME. July 1958, 80(5): 1156–1157. doi: https://doi.org/10.1115/1.4012635
View articletitled, Discussion: “Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint” (Sutherland, R. A., Latham, G. R., Gardner, R. M., and Seitz, Bradley G., 1958, Trans. ASME, 80, pp. 1143–1156)
Open the PDF for in another window
Topics: Consulting engineers
Discussion: “Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint” (Sutherland, R. A., Latham, G. R., Gardner, R. M., and Seitz, Bradley G., 1958, Trans. ASME, 80, pp. 1143–1156)
Wm. J. Rheingans
Trans. ASME. July 1958, 80(5): 1157–1158. doi: https://doi.org/10.1115/1.4012636
View articletitled, Discussion: “Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint” (Sutherland, R. A., Latham, G. R., Gardner, R. M., and Seitz, Bradley G., 1958, Trans. ASME, 80, pp. 1143–1156)
Open the PDF for in another window
Topics: Consulting engineers
Closure to “Discussions of ‘Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint’” (1958, Trans. ASME, 80, pp. 1156–1158)
R. A. Sutherland, G. R. Latham, Bradley G. Seitz
Trans. ASME. July 1958, 80(5): 1158–1159. doi: https://doi.org/10.1115/1.4012637
View articletitled, Closure to “Discussions of ‘Symposium on Welded Spiral Cases from the Consulting Engineers’ and Users’ Viewpoint’” (1958, Trans. ASME, 80, pp. 1156–1158)
Open the PDF for in another window
Topics: Consulting engineers
Discussion: “The Transient Response of a Two-Fluid Counterflow Heat Exchanger—The Gas-Turbine Regenerator” (Cima, R. M., and London, A. L., 1958, Trans. ASME, 80, pp. 1169–1175)
G. M. Dusinberre
Trans. ASME. July 1958, 80(5): 1175–1176. doi: https://doi.org/10.1115/1.4012640
View articletitled, Discussion: “The Transient Response of a Two-Fluid Counterflow Heat Exchanger—The Gas-Turbine Regenerator” (Cima, R. M., and London, A. L., 1958, Trans. ASME, 80, pp. 1169–1175)
Open the PDF for in another window
Topics: Fluids , Gas turbines , Heat exchangers , Transients (Dynamics)
Discussion: “The Transient Response of a Two-Fluid Counterflow Heat Exchanger—The Gas-Turbine Regenerator” (Cima, R. M., and London, A. L., 1958, Trans. ASME, 80, pp. 1169–1175)
J. W. Hlinka
Trans. ASME. July 1958, 80(5): 1176–1177. doi: https://doi.org/10.1115/1.4012641
View articletitled, Discussion: “The Transient Response of a Two-Fluid Counterflow Heat Exchanger—The Gas-Turbine Regenerator” (Cima, R. M., and London, A. L., 1958, Trans. ASME, 80, pp. 1169–1175)
Open the PDF for in another window
Topics: Fluids , Gas turbines , Heat exchangers , Transients (Dynamics)
Closure to “Discussions of ‘The Transient Response of a Two-Fluid Counterflow Heat Exchanger—The Gas-Turbine Regenerator’” (1958, Trans. ASME, 80, pp. 1175–1177)
R. M. Cima, A. L. London
Trans. ASME. July 1958, 80(5): 1177–1179. doi: https://doi.org/10.1115/1.4012642
View articletitled, Closure to “Discussions of ‘The Transient Response of a Two-Fluid Counterflow Heat Exchanger—The Gas-Turbine Regenerator’” (1958, Trans. ASME, 80, pp. 1175–1177)
Open the PDF for in another window
Topics: Fluids , Gas turbines , Heat exchangers , Transients (Dynamics)
Discussion: “Similar Solutions for Free Convection from a Nonisothermal Vertical Plate” (Sparrow, E. M., and Gregg, J. L., 1958, Trans. ASME, 80, pp. 379–386)
Myron Tribus
Trans. ASME. July 1958, 80(5): 1180–1181. doi: https://doi.org/10.1115/1.4012643
View articletitled, Discussion: “Similar Solutions for Free Convection from a Nonisothermal Vertical Plate” (Sparrow, E. M., and Gregg, J. L., 1958, Trans. ASME, 80, pp. 379–386)
Open the PDF for in another window
Topics: Natural convection , Vertical plates
Closure to “Discussion of ‘Similar Solutions for Free Convection from a Nonisothermal Vertical Plate’” (1958, Trans. ASME, 80, pp. 1180–1181)
E. M. Sparrow, J. L. Gregg
Trans. ASME. July 1958, 80(5): 1181. doi: https://doi.org/10.1115/1.4012644
View articletitled, Closure to “Discussion of ‘Similar Solutions for Free Convection from a Nonisothermal Vertical Plate’” (1958, Trans. ASME, 80, pp. 1180–1181)
Open the PDF for in another window
Topics: Natural convection

Announcement

ASME to Split Transactions Into Three Quarterlies: Journal of Applied Mechanics continues as fourth Transactions quarterly
Trans. ASME. July 1958, 80(5): 1182. doi: https://doi.org/10.1115/1.4012645
View articletitled, ASME to Split Transactions Into Three Quarterlies: Journal of Applied Mechanics continues as fourth Transactions quarterly
Open the PDF for in another window
Topics: Engineering mechanics
All Issues
On the dynamics of bubbles passing through a sand bed layer
J. Fluids Eng
Detached Eddy Simulation of Micro-Vortex Generators Mounted on NACA 4412 Airfoil
J. Fluids Eng
Parametric assessment of size and peak pressure variability for cavitation bubbles induced by low-voltage discharge
J. Fluids Eng
Turbulent flow in a transitional rough pipe universal laws; Power law velocity with equivalent log law velocity in the overlap region: Commencing from fully smooth pipe flow
J. Fluids Eng
Comparison of Vortex Structures and Turbulent Heat Transport for a Single Jet and Multiple Jets in Crossflow
J. Fluids Eng (June 2025)
  • Online ISSN 1528-901X
  • Print ISSN 0098-2202

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2025 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept