Skip Nav Destination
Issues
January 1955
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Design of Chimneys to Control Down-Wash of Gases
Trans. ASME. January 1955, 77(1): 1–7.
doi: https://doi.org/10.1115/1.4014205
Topics:
Design
,
Gases
,
Flow (Dynamics)
A Magnetic-Impulse Rapper System for Electrical Precipitators
Trans. ASME. January 1955, 77(1): 11–17.
doi: https://doi.org/10.1115/1.4014209
Topics:
Impulse (Physics)
,
Electrodes
,
Design
,
Pollution
,
Precipitation
Performance of the Periphery Pump
Trans. ASME. January 1955, 77(1): 19–22.
doi: https://doi.org/10.1115/1.4014210
Topics:
Pumps
,
Impellers
,
Flow (Dynamics)
,
Shear (Mechanics)
,
Fluids
,
Shapes
,
Shear stress
,
Surface roughness
Observations on Some Factors Affecting Timken Data for EP Lubricants
Trans. ASME. January 1955, 77(1): 29–31.
doi: https://doi.org/10.1115/1.4014218
Topics:
Lubricants
,
Machinery
,
Viscosity
On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—VIII: The Optimum Slider Profile for Viscosity a Function of the Pressure
Trans. ASME. January 1955, 77(1): 33–35.
doi: https://doi.org/10.1115/1.4014221
Topics:
Lubrication
,
Pressure
,
Slider bearings
,
Viscosity
,
Stress
,
Flow (Dynamics)
Studies in Cold-Drawing: Part 1—Effect of Cold-Drawing on Steel
Trans. ASME. January 1955, 77(1): 37–47.
doi: https://doi.org/10.1115/1.4014225
Topics:
Steel
,
Tension
,
Torsion
,
Aluminum
,
Brittleness
,
Cold rolling
,
Fatigue
,
Friction
,
Machining
,
Phase transition temperature
Studies in Cold-Drawing: Part 2—Cold-Working 2S-O Aluminum
Trans. ASME. January 1955, 77(1): 49–56.
doi: https://doi.org/10.1115/1.4014228
Topics:
Aluminum
,
Work hardening
,
Stress-strain curves
,
Tension
,
Fatigue
,
Friction
,
Residual stresses
,
Shear (Mechanics)
,
Stress
,
Torsion
The Effect of Dispersions on Creep Properties of Aluminum-Copper Alloys
Trans. ASME. January 1955, 77(1): 57–62.
doi: https://doi.org/10.1115/1.4014229
Topics:
Alloys
,
Aluminum
,
Copper
,
Creep
,
Disperse systems
,
Particulate matter
,
Temperature
,
Mean free path
,
Stress
Machinability Research With J&L Tool Dynamometer on Titanium 150A
Trans. ASME. January 1955, 77(1): 65–77.
doi: https://doi.org/10.1115/1.4014232
Topics:
Dynamometers
,
Machinability
,
Titanium
,
Coolants
,
Cutting
,
Finishes
,
Geometry
,
Machining
,
Stress
,
Wear
Testing Large Steam Turbines With Weighing Tanks
Trans. ASME. January 1955, 77(1): 79–85.
doi: https://doi.org/10.1115/1.4014237
Topics:
Steam turbines
,
Testing
,
Turbines
,
Design
,
Flow (Dynamics)
,
Heat
,
Clearances (Engineering)
,
Condensed matter
,
Cycles
,
Electricity (Physics)
Transient Gas-Flame Temperatures in a Spherical Bomb
Trans. ASME. January 1955, 77(1): 89–96.
doi: https://doi.org/10.1115/1.4014244
Topics:
Bombs
,
Flames
,
Temperature
,
Transients (Dynamics)
,
Vessels
,
Combustion
,
Ignition
,
Pressure
,
Pressure measurement
,
Sodium
Discussions and Closures
Discussion: “Design of Chimneys to Control Down-Wash of Gases” (Sherlock, R. H., and Lesher, E. J., 1955, Trans. ASME, 77, pp. 1–7)
Trans. ASME. January 1955, 77(1): 7–8.
doi: https://doi.org/10.1115/1.4014206
Discussion: “Design of Chimneys to Control Down-Wash of Gases” (Sherlock, R. H., and Lesher, E. J., 1955, Trans. ASME, 77, pp. 1–7)
Trans. ASME. January 1955, 77(1): 8.
doi: https://doi.org/10.1115/1.4014207
Closure to “Discussions of ‘Design of Chimneys to Control Down-Wash of Gases’” (1955, Trans. ASME, 77, pp. 7–8)
Trans. ASME. January 1955, 77(1): 8–9.
doi: https://doi.org/10.1115/1.4014208
Topics:
Design
Discussion: “Performance of the Periphery Pump” (Iversen, H. W., 1955, Trans. ASME, 77, pp. 19–22)
Trans. ASME. January 1955, 77(1): 23.
doi: https://doi.org/10.1115/1.4014211
Topics:
Pumps
Discussion: “Performance of the Periphery Pump” (Iversen, H. W., 1955, Trans. ASME, 77, pp. 19–22)
Trans. ASME. January 1955, 77(1): 23–24.
doi: https://doi.org/10.1115/1.4014212
Topics:
Pumps
Discussion: “Performance of the Periphery Pump” (Iversen, H. W., 1955, Trans. ASME, 77, pp. 19–22)
Trans. ASME. January 1955, 77(1): 24.
doi: https://doi.org/10.1115/1.4014213
Topics:
Pumps
Discussion: “Performance of the Periphery Pump” (Iversen, H. W., 1955, Trans. ASME, 77, pp. 19–22)
Trans. ASME. January 1955, 77(1): 24.
doi: https://doi.org/10.1115/1.4014214
Topics:
Pumps
Discussion: “Performance of the Periphery Pump” (Iversen, H. W., 1955, Trans. ASME, 77, pp. 19–22)
Trans. ASME. January 1955, 77(1): 24–25.
doi: https://doi.org/10.1115/1.4014215
Topics:
Pumps
Discussion: “Performance of the Periphery Pump” (Iversen, H. W., 1955, Trans. ASME, 77, pp. 19–22)
Trans. ASME. January 1955, 77(1): 25–27.
doi: https://doi.org/10.1115/1.4014216
Topics:
Pumps
Closure to “Discussions of ‘Performance of the Periphery Pump’” (1955, Trans. ASME, 77, pp. 23–27)
Trans. ASME. January 1955, 77(1): 27–28.
doi: https://doi.org/10.1115/1.4014217
Discussion: “Observations on Some Factors Affecting Timken Data for EP Lubricants” (DeArdo, A. J., and Kipp, E. M., 1955, Trans. ASME, 77, pp. 29–31)
Trans. ASME. January 1955, 77(1): 31.
doi: https://doi.org/10.1115/1.4014219
Topics:
Lubricants
Closure to “Discussion of ‘Observations on Some Factors Affecting Timken Data for EP Lubricants’” (1955, Trans. ASME, 77, p. 31)
Trans. ASME. January 1955, 77(1): 31.
doi: https://doi.org/10.1115/1.4014220
Discussion: “On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—VIII: The Optimum Slider Profile for Viscosity a Function of the Pressure” (Charnes, A., Osterle, F., and Saibel, E., 1955, Trans. ASME, 77, pp. 33–35)
Trans. ASME. January 1955, 77(1): 35–36.
doi: https://doi.org/10.1115/1.4014222
Topics:
Lubrication
,
Pressure
,
Slider bearings
,
Viscosity
Discussion: “On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—VIII: The Optimum Slider Profile for Viscosity a Function of the Pressure” (Charnes, A., Osterle, F., and Saibel, E., 1955, Trans. ASME, 77, pp. 33–35)
Trans. ASME. January 1955, 77(1): 36.
doi: https://doi.org/10.1115/1.4014223
Topics:
Lubrication
,
Pressure
,
Slider bearings
,
Viscosity
Closure to “Discussions of ‘On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—VIII: The Optimum Slider Profile for Viscosity a Function of the Pressure’” (1955, Trans. ASME, 77, pp. 35–36)
Trans. ASME. January 1955, 77(1): 36.
doi: https://doi.org/10.1115/1.4014224
Topics:
Lubrication
,
Slider bearings
,
Viscosity
Discussion: “Studies in Cold-Drawing: Part 1—Effect of Cold-Drawing on Steel” (Majors, Jr., H., 1955, Trans. ASME, 77, pp. 37–47)
Trans. ASME. January 1955, 77(1): 47–48.
doi: https://doi.org/10.1115/1.4014226
Topics:
Steel
Closure to “Discussion of ‘Studies in Cold-Drawing: Part 1—Effect of Cold-Drawing on Steel’” (1955, Trans. ASME, 77, pp. 47–48)
Trans. ASME. January 1955, 77(1): 48.
doi: https://doi.org/10.1115/1.4014227
Discussion: “The Effect of Dispersions on Creep Properties of Aluminum-Copper Alloys” (Giedt, W. H., Sherby, O. D., and Dorn, J. E., 1955, Trans. ASME, 77, pp. 57–62)
Trans. ASME. January 1955, 77(1): 62.
doi: https://doi.org/10.1115/1.4014230
Topics:
Alloys
,
Aluminum
,
Copper
,
Creep
,
Disperse systems
Closure to “Discussion of ‘The Effect of Dispersions on Creep Properties of Aluminum-Copper Alloys’” (1955, Trans. ASME, 77, p. 62)
Trans. ASME. January 1955, 77(1): 63.
doi: https://doi.org/10.1115/1.4014231
Topics:
Aluminum
,
Copper
,
Creep
,
Disperse systems
Discussion: “Machinability Research With J&L Tool Dynamometer on Titanium 150A” (Fersing, Leif, and Smith, D. N., 1955, Trans. ASME, 77, pp. 65–77)
Trans. ASME. January 1955, 77(1): 77.
doi: https://doi.org/10.1115/1.4014233
Topics:
Dynamometers
,
Machinability
,
Titanium
Discussion: “Machinability Research With J&L Tool Dynamometer on Titanium 150A” (Fersing, Leif, and Smith, D. N., 1955, Trans. ASME, 77, pp. 65–77)
Trans. ASME. January 1955, 77(1): 77.
doi: https://doi.org/10.1115/1.4014234
Topics:
Dynamometers
,
Machinability
,
Titanium
Discussion: “Machinability Research With J&L Tool Dynamometer on Titanium 150A” (Fersing, Leif, and Smith, D. N., 1955, Trans. ASME, 77, pp. 65–77)
Trans. ASME. January 1955, 77(1): 77–78.
doi: https://doi.org/10.1115/1.4014235
Topics:
Dynamometers
,
Machinability
,
Titanium
Closure to “Discussions of ‘Machinability Research With J&L Tool Dynamometer on Titanium 150A’” (1955, Trans. ASME, 77, pp. 77–78)
Trans. ASME. January 1955, 77(1): 78.
doi: https://doi.org/10.1115/1.4014236
Topics:
Dynamometers
,
Machinability
,
Titanium
Discussion: “Testing Large Steam Turbines With Weighing Tanks” (Pollock, W. A., 1955, Trans. ASME, 77, pp. 79–85)
Trans. ASME. January 1955, 77(1): 85–86.
doi: https://doi.org/10.1115/1.4014238
Topics:
Steam turbines
,
Testing
Discussion: “Testing Large Steam Turbines With Weighing Tanks” (Pollock, W. A., 1955, Trans. ASME, 77, pp. 79–85)
Trans. ASME. January 1955, 77(1): 86.
doi: https://doi.org/10.1115/1.4014239
Topics:
Steam turbines
,
Testing
Discussion: “Testing Large Steam Turbines With Weighing Tanks” (Pollock, W. A., 1955, Trans. ASME, 77, pp. 79–85)
Trans. ASME. January 1955, 77(1): 86.
doi: https://doi.org/10.1115/1.4014240
Topics:
Steam turbines
,
Testing
Discussion: “Testing Large Steam Turbines With Weighing Tanks” (Pollock, W. A., 1955, Trans. ASME, 77, pp. 79–85)
Trans. ASME. January 1955, 77(1): 86–87.
doi: https://doi.org/10.1115/1.4014241
Topics:
Steam turbines
,
Testing
Discussion: “Testing Large Steam Turbines With Weighing Tanks” (Pollock, W. A., 1955, Trans. ASME, 77, pp. 79–85)
Trans. ASME. January 1955, 77(1): 87–88.
doi: https://doi.org/10.1115/1.4014242
Topics:
Steam turbines
,
Testing
Closure to “Discussions of ‘Testing Large Steam Turbines With Weighing Tanks’” (1955, Trans. ASME, 77, pp. 85–88)
Trans. ASME. January 1955, 77(1): 88.
doi: https://doi.org/10.1115/1.4014243
Topics:
Steam turbines
,
Testing
Email alerts
RSS Feeds
Data-Driven Sparse Reconstruction of Three-Dimensional Steady and Unsteady Flow Fields in a Centrifugal Impeller
J. Fluids Eng (October 2025)
