Skip Nav Destination
Issues
July 1935
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Some Physical Properties of Water and Other Fluids
Trans. ASME. July 1935, 57(5): 193–196.
doi: https://doi.org/10.1115/1.4019954
Topics:
Fluids
,
Water
,
Temperature
,
Elastic moduli
,
Gases
,
Kinematics
,
Pressure
,
Specific heat
,
Viscosity
Propeller Pumps
Trans. ASME. July 1935, 57(5): 197–202.
doi: https://doi.org/10.1115/1.4019955
Topics:
Propellers
,
Pumps
,
Computation
,
Design
,
Axial flow
,
Blades
,
Cavitation
,
Disks
Concerning the Degree of Accuracy of the Gibson Method of Measuring the Flow of Water
Trans. ASME. July 1935, 57(5): 203–211.
doi: https://doi.org/10.1115/1.4019956
Topics:
Flow (Dynamics)
,
Water
,
Errors
,
Friction
,
Canals
,
Flow measurement
,
Flowmeters
,
Inertia (Mechanics)
,
Turbulence
,
Valuation
Experimental and Practical Experience With the Gibson Method of Water Measurement: A Discussion of Prof. D. Thoma’s Paper on “The Degree of Accuracy of the Gibson Method of Water Measurement”
Trans. ASME. July 1935, 57(5): 213–226.
doi: https://doi.org/10.1115/1.4019957
Topics:
Water
,
Errors
,
Pressure
,
Turbines
,
Flow (Dynamics)
,
Friction
,
Currents
,
Engineering teachers
,
Impulse (Physics)
,
Inertia (Mechanics)
Observations on the Use of Current Meters for Precise Flow Measurement
Trans. ASME. July 1935, 57(5): 227–228.
doi: https://doi.org/10.1115/1.4019958
Topics:
Errors
,
Flow (Dynamics)
,
Flow measurement
,
Hydropower
,
Instrumentation
,
Testing
,
Water
The Psychrograph
Trans. ASME. July 1935, 57(5): 229–237.
doi: https://doi.org/10.1115/1.4019959
Topics:
Air conditioning
Discussions and Closures
Discussion: “A Mathematical Solution of the Rotor-Balancing Problem” (Bromberg, Jacob, 1934, Trans. ASME, 56, pp. 707–710)
Trans. ASME. July 1935, 57(5): 239.
doi: https://doi.org/10.1115/1.4019960
Topics:
Rotor balancing
Discussion: “A Mathematical Solution of the Rotor-Balancing Problem” (Bromberg, Jacob, 1934, Trans. ASME, 56, pp. 707–710)
Trans. ASME. July 1935, 57(5): 239–240.
doi: https://doi.org/10.1115/1.4019961
Topics:
Rotor balancing
Discussion: “A Mathematical Solution of the Rotor-Balancing Problem” (Bromberg, Jacob, 1934, Trans. ASME, 56, pp. 707–710)
Trans. ASME. July 1935, 57(5): 240–241.
doi: https://doi.org/10.1115/1.4019962
Topics:
Rotor balancing
Discussion: “A Mathematical Solution of the Rotor-Balancing Problem” (Bromberg, Jacob, 1934, Trans. ASME, 56, pp. 707–710)
Trans. ASME. July 1935, 57(5): 241–242.
doi: https://doi.org/10.1115/1.4019963
Topics:
Rotor balancing
Closure to “Discussions of ‘A Mathematical Solution of the Rotor-Balancing Problem’” (1935, Trans. ASME, 57, pp. 239–242)
Trans. ASME. July 1935, 57(5): 242–244.
doi: https://doi.org/10.1115/1.4019964
Topics:
Rotor balancing
Discussion: “Calibration of Rounded-Approach Orifices” (Downie Smith, J. F., 1934, Trans. ASME, 56, pp. 791–793)
Trans. ASME. July 1935, 57(5): 245–246.
doi: https://doi.org/10.1115/1.4019968
Topics:
Calibration
,
Orifices
Discussion: “Calibration of Rounded-Approach Orifices” (Downie Smith, J. F., 1934, Trans. ASME, 56, pp. 791–793)
Trans. ASME. July 1935, 57(5): 246.
doi: https://doi.org/10.1115/1.4019969
Topics:
Calibration
,
Orifices
Discussion: “Calibration of Rounded-Approach Orifices” (Downie Smith, J. F., 1934, Trans. ASME, 56, pp. 791–793)
Trans. ASME. July 1935, 57(5): 246.
doi: https://doi.org/10.1115/1.4019970
Topics:
Calibration
,
Orifices
Discussion: “Calibration of Rounded-Approach Orifices” (Downie Smith, J. F., 1934, Trans. ASME, 56, pp. 791–793)
Trans. ASME. July 1935, 57(5): 246–247.
doi: https://doi.org/10.1115/1.4019971
Topics:
Calibration
,
Orifices
Discussion: “Calibration of Rounded-Approach Orifices” (Downie Smith, J. F., 1934, Trans. ASME, 56, pp. 791–793)
Trans. ASME. July 1935, 57(5): 247.
doi: https://doi.org/10.1115/1.4019972
Topics:
Calibration
,
Orifices
Discussion: “Calibration of Rounded-Approach Orifices” (Downie Smith, J. F., 1934, Trans. ASME, 56, pp. 791–793)
Trans. ASME. July 1935, 57(5): 247–248.
doi: https://doi.org/10.1115/1.4019973
Topics:
Calibration
,
Orifices
Closure to “Discussions of ‘Calibration of Rounded-Approach Orifices’” (1935, Trans. ASME, 57, pp. 245–248)
Trans. ASME. July 1935, 57(5): 248–249.
doi: https://doi.org/10.1115/1.4019974
Topics:
Calibration
Discussion: “The V-Notch Weir for Hot Water” (Smith, Jr., Ed S., 1934, Trans. ASME, 56, pp. 787–789)
Trans. ASME. July 1935, 57(5): 249–250.
doi: https://doi.org/10.1115/1.4019975
Topics:
Hot water
Discussion: “The V-Notch Weir for Hot Water” (Smith, Jr., Ed S., 1934, Trans. ASME, 56, pp. 787–789)
Trans. ASME. July 1935, 57(5): 250.
doi: https://doi.org/10.1115/1.4019976
Topics:
Hot water
Closure to “Discussions of ‘The V-Notch Weir for Hot Water’” (1935, Trans. ASME, 57, pp. 249–250)
Trans. ASME. July 1935, 57(5): 250.
doi: https://doi.org/10.1115/1.4019977
Discussion: “Fluid-Meter Nozzles” (Buckland, B. O., 1934, Trans. ASME, 56, pp. 827–832)
Trans. ASME. July 1935, 57(5): 251.
doi: https://doi.org/10.1115/1.4019978
Topics:
Flowmeters
,
Nozzles
Discussion: “Fluid-Meter Nozzles” (Buckland, B. O., 1934, Trans. ASME, 56, pp. 827–832)
Trans. ASME. July 1935, 57(5): 251–253.
doi: https://doi.org/10.1115/1.4019979
Topics:
Flowmeters
,
Nozzles
Discussion: “Fluid-Meter Nozzles” (Buckland, B. O., 1934, Trans. ASME, 56, pp. 827–832)
Trans. ASME. July 1935, 57(5): 253–254.
doi: https://doi.org/10.1115/1.4019980
Topics:
Flowmeters
,
Nozzles
Discussion: “Fluid-Meter Nozzles” (Buckland, B. O., 1934, Trans. ASME, 56, pp. 827–832)
Trans. ASME. July 1935, 57(5): 254.
doi: https://doi.org/10.1115/1.4019981
Topics:
Flowmeters
,
Nozzles
Discussion: “Fluid-Meter Nozzles” (Buckland, B. O., 1934, Trans. ASME, 56, pp. 827–832)
Trans. ASME. July 1935, 57(5): 254–255.
doi: https://doi.org/10.1115/1.4019982
Topics:
Flowmeters
,
Nozzles
Discussion: “Fluid-Meter Nozzles” (Buckland, B. O., 1934, Trans. ASME, 56, pp. 827–832)
Trans. ASME. July 1935, 57(5): 255.
doi: https://doi.org/10.1115/1.4019983
Topics:
Flowmeters
,
Nozzles
Closure to “Discussions of ‘Fluid-Meter Nozzles’” (1935, Trans. ASME, 57, pp. 251–255)
Trans. ASME. July 1935, 57(5): 255–256.
doi: https://doi.org/10.1115/1.4019984
Topics:
Flowmeters
Discussion: “Flow Distribution in Forced-Circulation Once-Through Steam Generators” (Solberg, H. L., Hawkins, G. A., and Potter, A. A., 1934, Trans. ASME, 56, pp. 841–849)
Trans. ASME. July 1935, 57(5): 256–257.
doi: https://doi.org/10.1115/1.4019985
Topics:
Boilers
,
Flow (Dynamics)
Closure to “Discussions of ‘Flow Distribution in Forced-Circulation Once-Through Steam Generators’” (1935, Trans. ASME, 57, pp. 256–257)
Trans. ASME. July 1935, 57(5): 257–258.
doi: https://doi.org/10.1115/1.4019987
Topics:
Flow (Dynamics)
,
Steam
Discussion: “Current Practice in Surface Broaching” (Geschelin, Joseph, 1934, Trans. ASME, 56, pp. 863–870)
Trans. ASME. July 1935, 57(5): 258–259.
doi: https://doi.org/10.1115/1.4019988
Discussion: “Current Practice in Surface Broaching” (Geschelin, Joseph, 1934, Trans. ASME, 56, pp. 863–870)
Trans. ASME. July 1935, 57(5): 259.
doi: https://doi.org/10.1115/1.4019989
Discussion: “Collapse by Instability of Thin Cylindrical Shells Under External Pressure” (Windenburg, Dwight F., and Trilling, Charles, 1934, Trans. ASME, 56, pp. 819–825)
Trans. ASME. July 1935, 57(5): 259–260.
doi: https://doi.org/10.1115/1.4019990
Topics:
Collapse
,
External pressure
,
Pipes
Discussion: “Collapse by Instability of Thin Cylindrical Shells Under External Pressure” (Windenburg, Dwight F., and Trilling, Charles, 1934, Trans. ASME, 56, pp. 819–825)
Trans. ASME. July 1935, 57(5): 260–261.
doi: https://doi.org/10.1115/1.4019994
Topics:
Collapse
,
External pressure
,
Pipes
Discussion: “Collapse by Instability of Thin Cylindrical Shells Under External Pressure” (Windenburg, Dwight F., and Trilling, Charles, 1934, Trans. ASME, 56, pp. 819–825)
Trans. ASME. July 1935, 57(5): 261–262.
doi: https://doi.org/10.1115/1.4019996
Topics:
Collapse
,
External pressure
,
Pipes
Discussion: “Collapse by Instability of Thin Cylindrical Shells Under External Pressure” (Windenburg, Dwight F., and Trilling, Charles, 1934, Trans. ASME, 56, pp. 819–825)
Trans. ASME. July 1935, 57(5): 262–263.
doi: https://doi.org/10.1115/1.4019997
Topics:
Collapse
,
External pressure
,
Pipes
Closure to “Discussions of ‘Collapse by Instability of Thin Cylindrical Shells Under External Pressure’” (1935, Trans. ASME, 57, pp. 259–263)
Trans. ASME. July 1935, 57(5): 263–265.
doi: https://doi.org/10.1115/1.4019999
Discussion: “The Test Performance of Hudson Avenue’s Most Recent Steam-Generating Units” (Hardie, P. H., and Cooper, W. S., 1934, Trans. ASME, 56, pp. 833–839)
Trans. ASME. July 1935, 57(5): 265–266.
doi: https://doi.org/10.1115/1.4020000
Topics:
Steam
Discussion: “The Test Performance of Hudson Avenue’s Most Recent Steam-Generating Units” (Hardie, P. H., and Cooper, W. S., 1934, Trans. ASME, 56, pp. 833–839)
Trans. ASME. July 1935, 57(5): 267–268.
doi: https://doi.org/10.1115/1.4020001
Topics:
Steam
Discussion: “The Test Performance of Hudson Avenue’s Most Recent Steam-Generating Units” (Hardie, P. H., and Cooper, W. S., 1934, Trans. ASME, 56, pp. 833–839)
Trans. ASME. July 1935, 57(5): 268–269.
doi: https://doi.org/10.1115/1.4020002
Topics:
Steam
Discussion: “The Test Performance of Hudson Avenue’s Most Recent Steam-Generating Units” (Hardie, P. H., and Cooper, W. S., 1934, Trans. ASME, 56, pp. 833–839)
Trans. ASME. July 1935, 57(5): 269.
doi: https://doi.org/10.1115/1.4020003
Topics:
Steam
Discussion: “The Test Performance of Hudson Avenue’s Most Recent Steam-Generating Units” (Hardie, P. H., and Cooper, W. S., 1934, Trans. ASME, 56, pp. 833–839)
Trans. ASME. July 1935, 57(5): 269–270.
doi: https://doi.org/10.1115/1.4020004
Topics:
Steam
Discussion: “The Test Performance of Hudson Avenue’s Most Recent Steam-Generating Units” (Hardie, P. H., and Cooper, W. S., 1934, Trans. ASME, 56, pp. 833–839)
Trans. ASME. July 1935, 57(5): 270.
doi: https://doi.org/10.1115/1.4020005
Topics:
Steam
Discussion: “The Test Performance of Hudson Avenue’s Most Recent Steam-Generating Units” (Hardie, P. H., and Cooper, W. S., 1934, Trans. ASME, 56, pp. 833–839)
Trans. ASME. July 1935, 57(5): 270–271.
doi: https://doi.org/10.1115/1.4020006
Topics:
Steam
Closure to “Discussions of ‘The Test Performance of Hudson Avenue’s Most Recent Steam-Generating Units’” (1935, Trans. ASME, 57, pp. 265–271)
Trans. ASME. July 1935, 57(5): 271–272.
doi: https://doi.org/10.1115/1.4020007
Topics:
Steam
Discussion: “The Elastic Properties of Steel at High Temperatures” (Versé, Guy, 1935, Trans. ASME, 57, pp. 1–4)
Trans. ASME. July 1935, 57(5): 272.
doi: https://doi.org/10.1115/1.4020008
Topics:
Elasticity
,
High temperature
,
Steel
Closure to “Discussion of ‘The Elastic Properties of Steel at High Temperatures’” (1935, Trans. ASME, 57, p. 272)
Trans. ASME. July 1935, 57(5): 272.
doi: https://doi.org/10.1115/1.4020009
Topics:
Elasticity
,
Steel
Email alerts
RSS Feeds
Computational Aeroacoustics of Low-Pressure Axial Fans Installed in Parallel
J. Fluids Eng (February 2025)