Skip Nav Destination
Issues
September 1997
ISSN 0098-2202
EISSN 1528-901X
In this Issue
Technical Forum
Questions in Fluid Mechanics: Understanding Foams and Foaming
J. Fluids Eng. September 1997, 119(3): 497–498.
doi: https://doi.org/10.1115/1.2819270
Topics:
Fluid mechanics
,
Foams (Chemistry)
Technological Competitiveness: A Fluids Engineers’ Viewpoint
J. Fluids Eng. September 1997, 119(3): 498.
doi: https://doi.org/10.1115/1.2819271
Research Papers
Flow Past Large Obstructions Between Corotating Disks in Fixed Cylindrical Enclosures
J. Fluids Eng. September 1997, 119(3): 499–505.
doi: https://doi.org/10.1115/1.2819272
Topics:
Disks
,
Flow (Dynamics)
,
Locks (Waterways)
,
Pressure
,
Drag (Fluid dynamics)
,
Reynolds number
,
Torque
,
Form drag
,
Friction
,
Kinematics
Suppression of Fluid Forces Acting on a Square Prism by Passive Control
J. Fluids Eng. September 1997, 119(3): 506–511.
doi: https://doi.org/10.1115/1.2819273
Topics:
Fluids
,
Passive control
,
Flat plates
,
Prisms (Optics)
,
Flow (Dynamics)
,
Drag (Fluid dynamics)
,
Vortex shedding
A Numerical Study of Vortex Shedding From a Square Cylinder With Ground Effect
J. Fluids Eng. September 1997, 119(3): 512–518.
doi: https://doi.org/10.1115/1.2819274
Application of Large Eddy Simulation to an Oscillating Flow Past a Circular Cylinder
J. Fluids Eng. September 1997, 119(3): 519–525.
doi: https://doi.org/10.1115/1.2819275
Prediction of Transpired Turbulent Boundary Layers With Arbitrary Pressure Gradients
J. Fluids Eng. September 1997, 119(3): 526–532.
doi: https://doi.org/10.1115/1.2819276
Effect of a Crossflow at the Entrance to a Film-Cooling Hole
J. Fluids Eng. September 1997, 119(3): 533–540.
doi: https://doi.org/10.1115/1.2819277
Topics:
Film cooling
,
Cooling
,
Flow (Dynamics)
,
Mach number
,
Separation (Technology)
,
Blades
,
Density
,
Gas turbines
,
Jets
,
Momentum
Turbulence Model for Steady and Unsteady Boundary Layers in Strong Pressure Gradients
J. Fluids Eng. September 1997, 119(3): 541–549.
doi: https://doi.org/10.1115/1.2819278
Topics:
Boundary layers
,
Pressure gradient
,
Turbulence
,
Separation (Technology)
,
Kinetic energy
,
Shear stress
,
Accounting
,
Convection
,
Flow (Dynamics)
,
Physics
Calculation of Fully-Developed Turbulent Flow in Rectangular Ducts With Nonuniform Wall Roughness
J. Fluids Eng. September 1997, 119(3): 550–558.
doi: https://doi.org/10.1115/1.2819279
Topics:
Ducts
,
Surface roughness
,
Turbulence
,
Flow (Dynamics)
,
Stress
,
Corners (Structural elements)
,
Anisotropy
,
Kinetic energy
Boundary Layer Excitation by Periodic Heating of a Thin Ribbon
J. Fluids Eng. September 1997, 119(3): 559–561.
doi: https://doi.org/10.1115/1.2819280
Topics:
Boundary layers
,
Excitation
,
Heating
Measurements in a Transitional Boundary Layer With Go¨rtler Vortices
J. Fluids Eng. September 1997, 119(3): 562–568.
doi: https://doi.org/10.1115/1.2819281
Topics:
Boundary layers
,
Vortices
,
Turbulence
,
Flow (Dynamics)
,
Reynolds number
,
Shear (Mechanics)
Numerical Analysis of Turbulent Flow in Fluid Couplings
J. Fluids Eng. September 1997, 119(3): 569–576.
doi: https://doi.org/10.1115/1.2819282
Effects of Efficiency Techniques on Accuracy of Dynamic-Overlapped Grids for Unsteady Flows
J. Fluids Eng. September 1997, 119(3): 577–583.
doi: https://doi.org/10.1115/1.2819283
Numerical Experiments on Application of Richardson Extrapolation With Nonuniform Grids
J. Fluids Eng. September 1997, 119(3): 584–590.
doi: https://doi.org/10.1115/1.2819284
Topics:
Errors
,
Turbulence
,
Uncertainty
Shape of an Annular Liquid Jet
J. Fluids Eng. September 1997, 119(3): 591–596.
doi: https://doi.org/10.1115/1.2819285
Topics:
Shapes
,
Pressure
,
Gravity (Force)
,
Differential equations
,
Inertia (Mechanics)
Air Entrainment in the Developing Flow Region of Plunging Jets—Part 1: Theoretical Development
J. Fluids Eng. September 1997, 119(3): 597–602.
doi: https://doi.org/10.1115/1.2819286
Air Entrainment in the Developing Flow Region of Plunging Jets—Part 2: Experimental
J. Fluids Eng. September 1997, 119(3): 603–608.
doi: https://doi.org/10.1115/1.2819287
Topics:
Air entrainment
,
Flow (Dynamics)
,
Jets
,
Bubbles
,
Water
,
Chords (Trusses)
,
Diffusion (Physics)
,
Momentum
,
Shear (Mechanics)
,
Porosity
The Influence of the Regulator Diameter and Injection Nozzle Geometry on the Flow Structure in Pneumatic Dimensional Control Systems
J. Fluids Eng. September 1997, 119(3): 609–615.
doi: https://doi.org/10.1115/1.2819288
Topics:
Control systems
,
Flow (Dynamics)
,
Geometry
,
Nozzles
,
Pressure
,
Air flow
,
Computer simulation
,
Control equipment
,
Flat plates
,
Temperature
On the Influence of Liquid Elasticity on Mixing in a Vessel Agitated by a Two-Bladed Impeller
J. Fluids Eng. September 1997, 119(3): 616–622.
doi: https://doi.org/10.1115/1.2819289
Topics:
Elasticity
,
Impellers
,
Vessels
,
Fluids
,
Computer simulation
,
Energy consumption
,
Finite element methods
,
Reynolds number
,
Viscoelastic fluids
A Digital Particle Image Velocimetry Investigation of Flow Field Instabilities of Axial-Flow Impellers
J. Fluids Eng. September 1997, 119(3): 623–632.
doi: https://doi.org/10.1115/1.2819290
Topics:
Axial flow
,
Flow (Dynamics)
,
Impellers
,
Particulate matter
,
Blades
,
Turbulence
,
Vessels
,
Computer simulation
,
Modeling
,
Time series
Visualization Measurement and Numerical Analysis of Internal Flow in Cross-Flow Fan
J. Fluids Eng. September 1997, 119(3): 633–638.
doi: https://doi.org/10.1115/1.2819291
Prediction of Flow Behavior and Performance of Squirrel-Cage Centrifugal Fans Operating at Medium and High Flow Rates
J. Fluids Eng. September 1997, 119(3): 639–646.
doi: https://doi.org/10.1115/1.2819292
Topics:
Fans
,
Flow (Dynamics)
,
Blades
,
Design
,
Performance characterization
,
Rotors
,
Sheet metal
,
Simulation
Theoretical Study of Pressure Fluctuations Downstream of a Diffuser Pump Impeller—Part 1: Fundamental Analysis on Rotor-Stator Interaction
J. Fluids Eng. September 1997, 119(3): 647–652.
doi: https://doi.org/10.1115/1.2819293
Topics:
Diffusers
,
Fluctuations (Physics)
,
Pressure
,
Pump impellers
,
Rotors
,
Stators
,
Vortices
,
Impellers
,
Unsteady flow
,
Blades
Theoretical Study of Pressure Fluctuations Downstream of a Diffuser Pump Impeller—Part 2: Effects of Volute, Flow Rate and Radial Gap
J. Fluids Eng. September 1997, 119(3): 653–658.
doi: https://doi.org/10.1115/1.2819294
Topics:
Diffusers
,
Flow (Dynamics)
,
Fluctuations (Physics)
,
Pressure
,
Pump impellers
,
Impellers
,
Blades
,
Unsteady flow
,
Vortices
,
Pumps
Development and Optimization of Screw Machines With a Simulation Model—Part I: Profile Generation
J. Fluids Eng. September 1997, 119(3): 659–663.
doi: https://doi.org/10.1115/1.2819295
Topics:
Machinery
,
Optimization
,
Screws
,
Simulation models
,
Rotors
,
Design
,
Algorithms
,
Compressors
,
Compression
,
Displacement
Development and Optimization of Screw Machines With a Simulation Model—Part II: Thermodynamic Performance Simulation and Design Optimization
J. Fluids Eng. September 1997, 119(3): 664–670.
doi: https://doi.org/10.1115/1.2819296
Topics:
Design
,
Machinery
,
Optimization
,
Screws
,
Simulation
,
Simulation models
,
Compressors
,
Fluids
,
Rotors
,
Fluid dynamics
Riser-Relief Valve Dynamic Interactions
J. Fluids Eng. September 1997, 119(3): 671–679.
doi: https://doi.org/10.1115/1.2819297
Tip Clearance and Tip Vortex Cavitation in an Axial Flow Pump
J. Fluids Eng. September 1997, 119(3): 680–685.
doi: https://doi.org/10.1115/1.2819298
Topics:
Axial flow
,
Cavitation
,
Clearances (Engineering)
,
Pumps
,
Wake turbulence
,
Blades
,
Geometry
,
Machinery
,
Pressure
,
Rotors
The Erosive Axial Collapse of a Cavitating Vortex: An Experimental Study
J. Fluids Eng. September 1997, 119(3): 686–691.
doi: https://doi.org/10.1115/1.2819299
Experimental Study of Deformation Mechanism of a Water Droplet Impinging on Hot Metallic Surfaces Above the Leidenfrost Temperature
J. Fluids Eng. September 1997, 119(3): 692–699.
doi: https://doi.org/10.1115/1.2819300
Topics:
Deformation
,
Drops
,
Metal surfaces
,
Temperature
,
Water
,
Alloys
,
Collisions (Physics)
,
Dynamics (Mechanics)
,
Silicon
,
Stainless steel
Two Types of Nonlinear Pressure-Drop Versus Flow-Rate Relation Observed for Saturated Porous Media
J. Fluids Eng. September 1997, 119(3): 700–706.
doi: https://doi.org/10.1115/1.2819301
A Two-Phase Cinematic PIV Method for Bubbly Flows
J. Fluids Eng. September 1997, 119(3): 707–712.
doi: https://doi.org/10.1115/1.2819302
Topics:
Bubbles
,
Bubbly flow
,
Fluids
,
Instrumentation
,
Lasers
,
Mirrors
,
Particulate matter
,
Shapes
,
Shear (Mechanics)
,
Turbulence
Technical Briefs
The Production of Shear Flow Profiles in a Wind Tunnel by a Shaped Honeycomb Technique
J. Fluids Eng. September 1997, 119(3): 713–715.
doi: https://doi.org/10.1115/1.2819303
Topics:
Honeycomb structures
,
Shear flow
,
Wind tunnels
Analytical Solutions for the Developing Jet From a Fully-Developed Laminar Tube Flow
J. Fluids Eng. September 1997, 119(3): 716–718.
doi: https://doi.org/10.1115/1.2819304
Topics:
Flow (Dynamics)
The Effect of Negative Spanwise Rotation on Dean Vortices
J. Fluids Eng. September 1997, 119(3): 718–721.
doi: https://doi.org/10.1115/1.2819305
New Parameters Describing Extra Straining Effects in Turbulence Models
J. Fluids Eng. September 1997, 119(3): 721–724.
doi: https://doi.org/10.1115/1.2819306
Topics:
Turbulence
Developing Laminar Flow in Eccentric Annuli
J. Fluids Eng. September 1997, 119(3): 724–728.
doi: https://doi.org/10.1115/1.2819307
Topics:
Annulus
,
Laminar flow
Discussions
Discussion: “Experimental Measurements in a Centrifugal Pump Impeller” (Bwalya, A. C., and Johnson, M. W., 1996, ASME J. Fluids Eng., 118, pp. 692–697)
J. Fluids Eng. September 1997, 119(3): 729.
doi: https://doi.org/10.1115/1.2819308
Topics:
Centrifugal pumps
,
Fluids
,
Impellers
Closure to “Discussion of ‘Experimental Measurements in a Centrifugal Pump Impeller’” (1997, ASME J. Fluids Eng., 119, p. 729)
J. Fluids Eng. September 1997, 119(3): 729.
doi: https://doi.org/10.1115/1.2819309
Topics:
Centrifugal pumps
,
Fluids