Abstract

This article presents the results of an experimental investigation into the impact of rake, or inclination of the underfloor, on the aerodynamics of a bluff body equipped with an underbody diffuser. An extensive wind tunnel campaign, utilizing a remotely actuated model for faster data acquisition, showed that introducing rake results in a downforce increase at all ride heights and diffuser angles, with the strongest effect occurring at low ride heights. Surface pressure measurements on the underbody revealed this to be caused by three main effects. First, a large increase in loading at the front of the floor, due to the inclination of the floor with rake angle and subsequently an increase in the pressure pumping effect. Second, a reduction in the suction peak at the throat of the diffuser, which leads to reduced pressure recovery in the diffuser, and less likely separation at high diffuser angles or low ride heights. Third, stronger streamwise vortices along the edges of the underfloor and diffuser, which generate downforce directly due to their low-pressure cores, but also introduce upwash under the model, further inhibiting separation in the diffuser. As the related drag penalty is minimal, aerodynamic efficiency is also improved with increasing rake angle.

References

1.
Katz
,
J.
,
2006
, “
Aerodynamics of Race Cars
,”
Annu. Rev. Fluid Mech.
,
38
(
1
), pp.
27
63
.10.1146/annurev.fluid.38.050304.092016
2.
Zhang
,
X.
,
Toet
,
W.
, and
Zerihan
,
J.
,
2006
, “
Ground Effect Aerodynamics of Race Cars
,”
ASME Appl. Mech. Rev.
,
59
(
1
), pp.
33
49
.10.1115/1.2110263
3.
Cooper
,
K. R.
,
Bertenyi
,
T.
,
Dutil
,
G.
,
Syms
,
J.
, and
Sovran
,
G.
,
1998
, “
The Aerodynamic Performance of Automotive Underbody Diffusers
,”
SAE
Paper No. 980030.10.4271/980030
4.
Ahmed
,
S. R.
,
Ramm
,
G.
, and
Faltin
,
G.
,
1984
, “
Some Salient Features of the Time-Averaged Ground Vehicle Wake
,”
SAE
Paper No. 840300.10.4271/840300
5.
Cogotti
,
A.
,
1998
, “
A Parametric Study on the Ground Effect of a Simplified Car Model
,”
SAE
Paper No. 980031.10.4271/980031
6.
Senior
,
A. E.
, and
Zhang
,
X.
,
2001
, “
The Force and Pressure of a Diffuser-Equipped Bluff Body in Ground Effect
,”
ASME J. Fluids Eng.
,
123
(
1
), pp.
105
111
.10.1115/1.1340637
7.
Ruhrmann
,
A.
, and
Zhang
,
X.
,
2003
, “
Influence of Diffuser Angle on a Bluff Body in Ground Effect
,”
ASME J. Fluids Eng.
,
125
(
2
), pp.
332
338
.10.1115/1.1537252
8.
Ehirim
,
O.
,
Knowles
,
K.
,
Saddington
,
A.
, and
Finnis
,
M.
,
2018
, “
Passive Flow Control on a Ground-Effect Diffuser Using an Inverted Wing
,”
SAE Int. J. Passenger Cars - Mech. Syst.
,
11
(
4
), pp.
273
296
.10.4271/06-11-04-0023
9.
Ehirim
,
O. H.
,
Knowles
,
K.
,
Saddington
,
A. J.
, and
Finnis
,
M. V.
,
2018
, “
Aerodynamics of a Convex Bump on a Ground-Effect Diffuser
,”
ASME J. Fluids Eng.
,
140
(
9
), p.
091102
.10.1115/1.4039518
10.
George
,
A. R.
,
1981
, “
Aerodynamic Effects of Shape, Camber, Pitch, and Ground Proximity on Idealized Ground-Vehicle Bodies
,”
ASME J. Fluids Eng.
,
103
(
4
), pp.
631
637
.10.1115/1.3241783
11.
Zhang
,
X.
,
Senior
,
A.
, and
Ruhrmann
,
A.
,
2004
, “
Vortices Behind a Bluff Body With an Upswept Aft Section in Ground Effect
,”
Int. J. Heat Fluid Flow
,
25
(
1
), pp.
1
9
.10.1016/j.ijheatfluidflow.2003.11.002
12.
George
,
A. R.
, and
Donis
,
J. E.
,
1983
, “
Flow Patterns, Pressures, and Forces on the Underside of Idealized Ground Effect Vehicles
,”
Aerodynamics of transportation - II: Presented at the Joint ASME-CSME Applied Mechanics, and Fluids Engineering Conference
,
ASME
,
New York
, Vol.
7
, pp.
69
79
.https://www.researchgate.net/publication/292650936_Flow_patterns_pressures_and_forces_on_the_underside_of_idealized_ground_effect_vehicles
13.
Desai
,
S. S.
,
Lo
,
C.-M. B.
, and
George
,
A. R.
, “
A Computational Study of Idealized Bluff Bodies, Wheels, and Vortex Structures in Ground Effect
,”
SAE
Paper No. 2008-01-032710.4271/2008-01-0327 2008.
14.
Puglisevich
,
L. S.
, and
Page
,
G.
,
2011
, “
Large Eddy Simulation of the Flow Around a Diffuser-Equipped Bluff Body in Ground Effect
,”
ASME
Paper No. IMECE2011-62673.10.1115/IMECE2011-62673
15.
Porcar
,
L.
,
Toet
,
W.
, and
Gamez-Montero
,
P. J.
,
2021
, “
Study of the Effect of Vertical Airfoil Endplates on Diffusers in Vehicle Aerodynamics
,”
Designs
,
5
(
3
), p.
45
.10.3390/designs5030045
16.
Mayoral
,
S.
,
Weiss
,
H.
, and
Edirisinghe
,
R.
,
2019
, “
On the Relationship Between the Vortices From an Underbody Diffuser in Ground-Effect and the Resulting Downforce
,”
SAE
Paper No. 2019-01-0650.10.4271/2019-01-0650
17.
Mahon
,
S.
,
Zhang
,
X.
, and
Gage
,
C.
,
2004
, “
The Evolution of Edge Vortices Underneath a Diffuser Equipped Bluff Body
,”
12th International Symposium on Applications of Laser Techniques to Fluid Mechanics
,
Lisbon, Portugal
, July 12–15, pp.
1
10
.https://eprints.soton.ac.uk/22957/1/paper_35_2.pdf
18.
Ehirim
,
O.
,
Knowles
,
K.
,
Saddington
,
A.
,
Finnis
,
M.
, and
Lawson
,
N.
,
2019
, “
On the Near-Wake of a Ground-Effect Diffuser With Passive Flow Control
,”
Int. J. Automot. Technol.
,
20
(
1
), pp.
11
23
.10.1007/s12239-019-0002-2
19.
Breslouer
,
O. J.
, and
George
,
A. R.
,
2008
, “
Exploratory Experimental Studies of Forces and Flow Structure on a Bluff Body With Variable Diffuser and Wheel Configurations
,”
SAE
Paper No. 2008-01-0326.10.4271/2008-01-0326
20.
Jowsey
,
L.
, and
Passmore
,
M.
,
2010
, “
Experimental Study of Multiple-Channel Automotive Underbody Diffusers
,”
Proc. Inst. Mech. Eng., Part D
,
224
(
7
), pp.
865
879
.10.1243/09544070JAUTO1339
21.
Knight
,
J.
,
Spicak
,
M.
,
Kuzenko
,
A.
,
Haritos
,
G.
, and
Ren
,
G.
,
2018
, “
Investigation of Vehicle Ride Height and Diffuser Ramp Angle on Downforce and Efficiency
,”
Proc. Inst. Mech. Eng., Part D
,
233
(
8
), pp.
2139
2145
.10.1177/0954407018776767
22.
Ehirim
,
O. H.
,
2017
, “
Aerodynamics and Performance Enhancement of a Ground-Effect Diffuser
,”
Ph.D. thesis
,
Cranfield University
, Cranfield, UK.https://dspace.lib.cranfield.ac.uk/items/29c6d584-5e5a-47ce-be7c-d800ac49c06f
23.
Howell
,
J. P.
,
1994
, “
The Influence of Ground Simulation on the Aerodynamics of Simple Car Shapes With an Underfloor Diffuser
,”
Conference on Vehicle Aerodynamics
,
Royal Aerodynamic Society
, Loughborough, UK, July
18
19
.
24.
Kekus
,
P.
, and
Angland
,
D.
,
2018
, “
Automatic Wind Tunnel-Based Optimisation of an Automotive Underbody Diffuser
,”
AIAA
Paper No. 2018-0045.10.2514/6.2018-0045
25.
Burgin
,
K.
,
Adey
,
P. C.
, and
Beatham
,
J. P.
,
1986
, “
Wind Tunnel Tests on Road Vehicle Models Using a Moving Belt Simulation of Ground Effect
,”
J. Wind Eng. Ind. Aerodyn.
,
22
(
2–3
), pp.
227
236
.10.1016/0167-6105(86)90087-5
26.
Kekus
,
P.
,
2021
, “
Aerodynamics and Experimental Optimisation of an Automotive Underbody Diffuser in the Presence of Rake
,”
Ph.D. thesis
,
University of Southampton
, Southampton, UK.https://eprints.soton.ac.uk/454321/1/PK_Thesis.pdf
27.
Huminic
,
A.
, and
Huminic
,
G.
,
2020
, “
Aerodynamics of Curved Underbody Diffusers Using CFD
,”
J. Wind Eng. Ind. Aerodyn.
,
205
, p.
104300
.10.1016/j.jweia.2020.104300
28.
Jowsey
,
L.
,
2013
, “
An Experimental Study of Automotive Underbody Diffusers
,”
Ph.D. thesis
,
Loughborough University
, Loughborough, UK.https://repository.lboro.ac.uk/articles/thesis/An_experimental_study_of_automotive_underbody_diffusers/9216566?file=16790189
29.
Reneau
,
L. R.
,
Johnston
,
J. P.
, and
Kline
,
S. J.
,
1967
, “
Performance and Design of Straight, Two-Dimensional Diffusers
,”
ASME J. Basic Eng.
,
89
(
1
), pp.
141
150
.10.1115/1.3609544
You do not currently have access to this content.