... to calculate the total energy reclaimed by the pneumatic boost converter as well as the system efficiency. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received July 13, 2017; final manuscript...

... of the working pressure and rotational speed can increase the pump's working performance to its optimum level. 1 Corresponding author. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received August 15...

... of the experimental validation are presented. 1 Corresponding author. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received October 25, 2017; final manuscript received July 17, 2018; published online...

... in the joint space (while its gains are not adjustable), which yields the jerky motions and subsequently, the inefficient operation of the robot. The undesirable responses can be observed through the experimental work which we have carried out in our Dynamic Systems and Control Laboratory (DSCL). We observed...

... of the wire middle point (25) A v C = 2 π c I 0 2 β l The project described in this paper has been performed under Project No. 11.11.130.734. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M...

... 1 Corresponding author. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received June 28, 2017; final manuscript received June 21, 2018; published online July 23, 2018. Assoc. Editor: Heikki...

... the previously reported results with magnetic field measurements and a PID-based control scheme. 1 Corresponding author. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received September 26, 2017...

... ) + T e − T ̂ e = ( M ̃ v ̇ + C ̃ v + g ̃ + R ̃ ) where p ̂ is the estimate of p . 1 Corresponding author. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D...

... is not possible unless one accurately models each droplet behavior and incorporates it into the control scheme. Control theory Manufacturing technology Modeling and simulation Nonlinear systems Real time control Dynamic systems Control 31 05 2017 09 05 2018 Contributed...

... located in the motor arms. Adaptive Aerospace systems Modeling and simulation Optimal control Dynamic systems 30 08 2017 17 05 2018 Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL...

... Corresponding author. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received September 11, 2017; final manuscript received May 2, 2018; published online June 18, 2018. Assoc. Editor: Mazen Farhood...

... and landing. 1 Corresponding author. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received September 11, 2017; final manuscript received May 3, 2018; published online June 4, 2018. Assoc. Editor...

... corresponding to the primary and secondary loops. The vertex corresponding to the wall temperature of HX 1, which couples the thermal dynamics of the two loops, is represented as a sink vertex in each subsystem graph. 1 Corresponding author. Contributed by the Dynamic Systems Division of ASME...

... speed. Various stages of proportional and derivative (PD) controllers, lead/lag compensators, and notch filters are implemented to suppress the high-frequency sensor disturbances, structural vibrations, and rotor imbalance effects. Contributed by the Dynamic Systems Division of ASME...

... of Stick-Slip Friction in Mechanical Dynamic Systems ,” ASME J. Dyn. Syst. Meas. Control , 107 ( 1 ), pp. 100 – 103 . 10.1115/1.3140698 1 Corresponding author. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT...

... are examined. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received July 5, 2017; final manuscript received March 16, 2018; published online May 3, 2018. Assoc. Editor: Sergey Nersesov. 05 07...

... Modeling and simulation Nonlinear systems Dynamic systems Control 30 06 2017 02 03 2018 Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received June 30, 2017; final manuscript...

... attracted numerous attention from researchers all over the world. So, achieving high precision load simulation is of practical significance for EHLS [ 4 ]. Modeling and simulation Dynamic systems 01 04 2016 22 02 2018 Contributed by the Dynamic Systems Division of ASME...

... oscillation reduction. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received July 9, 2017; final manuscript received March 16, 2018; published online May 2, 2018. Assoc. Editor: Davide Spinello...

... downsized components. 1 Corresponding author. Contributed by the Dynamic Systems Division of ASME for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received April 24, 2017; final manuscript received March 14, 2018; published online May 2, 2018. Assoc...