We propose a new control strategy for on-off valve controlled pneumatic actuators and robots with focus on the position accuracy. A mathematical model incorporating pneumatic process nonlinearities and nonlinear mechanical friction has been developed to characterize the actuator dynamics; this model with a few simplifications is then used to design the controller. In our control scheme, one valve is held open and the other is operated under the pulse width modulation mode to simulate the proportional control. An inner loop utilizing proportional-plus-integral control is formed to control the actuator pressure, and an outer loop with displacement and velocity feedbacks is used to control the load displacement. Also, a two staged feedforward force is implemented to reduce the steady state error due to the nonlinear mechanical friction. Experimental results on a single-degree-of-freedom pneumatic robot indicate that the proposed control system is better than the conventional on-off control strategy as it is effective in achieving the desired position accuracy without using any mechanical stops in the actuator.
Skip Nav Destination
Article navigation
December 1990
Research Papers
Accurate Position Control of a Pneumatic Actuator
Jiing-Yih Lai,
Jiing-Yih Lai
Fluid Power Laboratory, Department of Mechanical Engineering, The Ohio State University, Columbus, Ohio 43210-1107
Search for other works by this author on:
Chia-Hsiang Menq,
Chia-Hsiang Menq
Fluid Power Laboratory, Department of Mechanical Engineering, The Ohio State University, Columbus, Ohio 43210-1107
Search for other works by this author on:
Rajendra Singh
Rajendra Singh
Fluid Power Laboratory, Department of Mechanical Engineering, The Ohio State University, Columbus, Ohio 43210-1107
Search for other works by this author on:
Jiing-Yih Lai
Fluid Power Laboratory, Department of Mechanical Engineering, The Ohio State University, Columbus, Ohio 43210-1107
Chia-Hsiang Menq
Fluid Power Laboratory, Department of Mechanical Engineering, The Ohio State University, Columbus, Ohio 43210-1107
Rajendra Singh
Fluid Power Laboratory, Department of Mechanical Engineering, The Ohio State University, Columbus, Ohio 43210-1107
J. Dyn. Sys., Meas., Control. Dec 1990, 112(4): 734-739 (6 pages)
Published Online: December 1, 1990
Article history
Received:
August 18, 1988
Revised:
April 1, 1989
Online:
March 17, 2008
Citation
Lai, J., Menq, C., and Singh, R. (December 1, 1990). "Accurate Position Control of a Pneumatic Actuator." ASME. J. Dyn. Sys., Meas., Control. December 1990; 112(4): 734–739. https://doi.org/10.1115/1.2896202
Download citation file:
Get Email Alerts
Data-Driven Tracking Control of a Cushion Robot With Safe Autonomous Motion Considering Human-Machine Interaction Environment
J. Dyn. Sys., Meas., Control (July 2025)
Dynamic Obstacle Avoidance Strategy for High-Speed Vehicles Via Constrained Model Predictive Control and Improved Artificial Potential Field
J. Dyn. Sys., Meas., Control (July 2025)
An Adaptive Sliding-Mode Observer-Based Fuzzy PI Control Method for Temperature Control of Laser Soldering Process
J. Dyn. Sys., Meas., Control
Related Articles
Force Control Loop Affected by Bounded Uncertainties and Unbounded Inputs for Pneumatic Actuator Systems
J. Dyn. Sys., Meas., Control (January,2008)
Control of Pneumatic Artificial Muscle Actuated Two Degrees-of-Freedom Robot Using PD-Based Pulse Width Modulation Strategy With Feed-Forward Outer Control Loop
J. Mechanisms Robotics (June,2023)
Decentralized Feedback Control of Pumping Losses and NO x Emissions in Diesel Engines
J. Eng. Gas Turbines Power (October,2018)
Development of a Pulse-Width Modulated Pneumatic Rotary Valve for Actuator Position Control
J. Dyn. Sys., Meas., Control (September,1993)
Related Proceedings Papers
Related Chapters
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Smart Semi-Active Control of Floor-Isolated Structures
Intelligent Engineering Systems Through Artificial Neural Networks, Volume 17
Design of Assembly Robot Controller Based on PROFI-BUS for Hubcap Gear-Box Pressure Assembling
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)