Skip Nav Destination
Issues
October 2005
ISSN 0148-0731
EISSN 1528-8951
Technical Papers
Bone/Orthopedic
Development and Validation of A C0–C7 FE Complex for Biomechanical Study
J Biomech Eng. October 2005, 127(5): 729–735.
doi: https://doi.org/10.1115/1.1992527
Topics:
Biomechanics
,
Cervical spine
,
Finite element model
,
Kinematics
,
Physiology
,
Rotation
,
Bone
,
Finite element analysis
,
Modeling
Determining Effective Centroid Position in Biomechanical Testing: A Technique for Simplifying Whole Bone Analysis
J Biomech Eng. October 2005, 127(5): 736–741.
doi: https://doi.org/10.1115/1.1993663
Topics:
Biomechanics
,
Bone
,
Elastic moduli
,
Stress
,
Testing
,
Strain gages
Cell
The Development of Structural and Mechanical Anisotropy in Fibroblast Populated Collagen Gels
J Biomech Eng. October 2005, 127(5): 742–750.
doi: https://doi.org/10.1115/1.1992525
Topics:
Anisotropy
,
Fibers
,
Fibroblasts
,
Biological tissues
,
Mechanical testing
,
Tendons
,
Mechanical properties
Correlation of HSP70 Expression and Cell Viability Following Thermal Stimulation of Bovine Aortic Endothelial Cells
J Biomech Eng. October 2005, 127(5): 751–757.
doi: https://doi.org/10.1115/1.1993661
Topics:
Biological tissues
,
Damage
,
Endothelial cells
,
Heating
,
Proteins
,
Temperature
,
Wounds
,
Thermal stresses
,
Heat
,
Dosimetry
Nutrient Utilization by Bovine Articular Chondrocytes: A Combined Experimental and Theoretical Approach
J Biomech Eng. October 2005, 127(5): 758–766.
doi: https://doi.org/10.1115/1.1993664
Topics:
Agar
,
Chondrocytes
,
Diffusion (Physics)
,
Glucose
,
Oxygen
,
Tissue engineering
,
Finite element analysis
Fluids/Heat/Transport
3-D Numerical Simulation of Blood Flow Through Models of the Human Aorta
J Biomech Eng. October 2005, 127(5): 767–775.
doi: https://doi.org/10.1115/1.1992521
Topics:
Aorta
,
Aortic arch
,
Flow (Dynamics)
,
Computational fluid dynamics
,
Blood flow
,
Computerized tomography
Thin-Film Coupled Fluid-Solid Analysis of Flow Through the Ahmed™ Glaucoma Drainage Device
J Biomech Eng. October 2005, 127(5): 776–781.
doi: https://doi.org/10.1115/1.1993662
Topics:
Automated guided vehicles
,
Drainage
,
Flow (Dynamics)
,
Pressure
,
Pressure drop
,
Valves
,
Fluids
,
Physiology
,
Finite element methods
,
Lubrication theory
Flow in a Mechanical Bileaflet Heart Valve at Laminar and Near-Peak Systole Flow Rates: CFD Simulations and Experiments
J Biomech Eng. October 2005, 127(5): 782–797.
doi: https://doi.org/10.1115/1.1993665
Topics:
Flow (Dynamics)
,
Simulation
,
Turbulence
,
Valves
,
Laminar flow
,
Computational fluid dynamics
,
Computer simulation
,
Reynolds number
Effect of Gravity on Liquid Plug Transport Through an Airway Bifurcation Model
J Biomech Eng. October 2005, 127(5): 798–806.
doi: https://doi.org/10.1115/1.1992529
Topics:
Bifurcation
,
Gravity (Force)
,
Lung
,
Patient treatment
Joint/Whole Body
An Intelligent Control Method Based on Fuzzy Logic for a Robotic Testing System for the Human Spine
J Biomech Eng. October 2005, 127(5): 807–812.
doi: https://doi.org/10.1115/1.1992520
Topics:
Biomechanics
,
Control equipment
,
Displacement
,
Errors
,
Fuzzy logic
,
Human spine
,
Robotic testing
,
Stress
,
Hybrid control
,
Robotics
Comparison of Deformable and Elastic Foundation Finite Element Simulations for Predicting Knee Replacement Mechanics
J Biomech Eng. October 2005, 127(5): 813–818.
doi: https://doi.org/10.1115/1.1992522
Topics:
Cycles
,
Design
,
Finite element analysis
,
Kinematics
,
Knee joint prostheses
,
Pressure
,
Simulation
,
Stress
,
Wear
,
Finite element model
Pre-Strained Epimuscular Connections Cause Muscular Myofascial Force Transmission to Affect Properties of Synergistic EHL and EDL Muscles of the Rat
J Biomech Eng. October 2005, 127(5): 819–828.
doi: https://doi.org/10.1115/1.1992523
Topics:
Muscle
A Method for Measurement of Joint Kinematics in Vivo by Registration of 3-D Geometric Models With Cine Phase Contrast Magnetic Resonance Imaging Data
J Biomech Eng. October 2005, 127(5): 829–837.
doi: https://doi.org/10.1115/1.1992524
Topics:
Bone
,
Kinematics
,
Knee
,
Magnetic resonance imaging
,
Phantoms
,
Rotation
,
Trajectories (Physics)
,
Cycles
,
Optimization
Soft Tissue
Experimental Investigation Into the Deep Penetration of Soft Solids by Sharp and Blunt Punches, With Application to the Piercing of Skin
J Biomech Eng. October 2005, 127(5): 838–848.
doi: https://doi.org/10.1115/1.1992528
Topics:
Fracture (Materials)
,
Silicone rubber
,
Skin
,
Stress
,
Rubber
,
Displacement
Estimation of Vibration Power Absorption Density in Human Fingers
J Biomech Eng. October 2005, 127(5): 849–856.
doi: https://doi.org/10.1115/1.1992526
Topics:
Absorption
,
Density
,
Vibration
Other
Design of a Sterile Organ Culture System for the Ex Vivo Study of Aortic Heart Valves
J Biomech Eng. October 2005, 127(5): 857–861.
doi: https://doi.org/10.1115/1.1992535
Topics:
Bioreactors
,
Design
,
Flow (Dynamics)
,
Oxygen
,
Pressure
,
Valves
,
Hemodynamics
,
Physiology
,
Cardiovascular system
,
Tissue engineering
Technical Briefs
Wave Intensity Analysis of Left Ventricular Filling
J Biomech Eng. October 2005, 127(5): 862–867.
doi: https://doi.org/10.1115/1.1992534
Topics:
Waves
,
Pressure
,
Flow (Dynamics)
,
Valves
Automated Methodology for Determination of Stress Distribution in Human Abdominal Aortic Aneurysm
J Biomech Eng. October 2005, 127(5): 868–871.
doi: https://doi.org/10.1115/1.1992530
Topics:
Algorithms
,
Aneurysms
,
Biomechanics
,
Finite element analysis
,
Pressure
,
Risk
,
Rupture
,
Stress
,
Stress analysis (Engineering)
,
Stress concentration
Preclinical Testing of Femoral Hip Components: An Experimental Investigation With Four Prostheses
J Biomech Eng. October 2005, 127(5): 872–880.
doi: https://doi.org/10.1115/1.1992531
Topics:
Cycles
,
Displacement
,
Prostheses
,
Testing
,
Bone
That Hemodynamics and Not Material Mismatch is of Primary Concern in Bypass Graft Failure: An Experimental Argument
J Biomech Eng. October 2005, 127(5): 881–886.
doi: https://doi.org/10.1115/1.1992532
Topics:
Diseases
,
Failure
,
Flow (Dynamics)
,
Hemodynamics
,
Junctions
,
Laser Doppler anemometry
,
Deformation
,
Pressure
Migration of Radio-Opaque Markers Injected Into Tendon Grafts: A Study Using Roentgen Stereophotogrammetric Analysis (RSA)
J Biomech Eng. October 2005, 127(5): 887–890.
doi: https://doi.org/10.1115/1.1992533
Erratum
Erratum: “Cellular Cross-linking of Peptide Modified Hydrogels” [Journal of Biomechanical Engineering, 2005, 127(2), pp. 220–228]
J Biomech Eng. October 2005, 127(5): 891.
doi: https://doi.org/10.1115/1.2054587
Topics:
Biomechanical engineering
,
Hydrogels
Email alerts
RSS Feeds
Simulating the Growth of TATA-Box Binding Protein-Associated Factor 15 Inclusions in Neuron Soma
J Biomech Eng (December 2024)
Evaluation of an Inverse Method for Quantifying Spatially Variable Mechanics
J Biomech Eng (December 2024)
Effect of Structure and Wearing Modes on the Protective Performance of Industrial Safety Helmet
J Biomech Eng (December 2024)
Sex-Based Differences and Asymmetry in Hip Kinematics During Unilateral Extension From Deep Hip Flexion
J Biomech Eng (December 2024)